drm/i915: ->disable hook for WRPLLs

Currently still with a redudant WARN_ON in there, the common shared
dpll code will take care of this in the future.

Also we need to flip the switch for the transitional hack now to make
sure that we disable the right pll.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_ddi.c

@@ -391,28 +391,20 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
 	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
 	struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	uint32_t val;
+	struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(intel_crtc);
 
 	switch (intel_crtc->config.ddi_pll_sel) {
 	case PORT_CLK_SEL_WRPLL1:
 		plls->wrpll1_refcount--;
 		if (plls->wrpll1_refcount == 0) {
-			DRM_DEBUG_KMS("Disabling WRPLL 1\n");
-			val = I915_READ(WRPLL_CTL1);
-			WARN_ON(!(val & WRPLL_PLL_ENABLE));
-			I915_WRITE(WRPLL_CTL1, val & ~WRPLL_PLL_ENABLE);
-			POSTING_READ(WRPLL_CTL1);
+			pll->disable(dev_priv, pll);
 		}
 		intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
 		break;
 	case PORT_CLK_SEL_WRPLL2:
 		plls->wrpll2_refcount--;
 		if (plls->wrpll2_refcount == 0) {
-			DRM_DEBUG_KMS("Disabling WRPLL 2\n");
-			val = I915_READ(WRPLL_CTL2);
-			WARN_ON(!(val & WRPLL_PLL_ENABLE));
-			I915_WRITE(WRPLL_CTL2, val & ~WRPLL_PLL_ENABLE);
-			POSTING_READ(WRPLL_CTL2);
+			pll->disable(dev_priv, pll);
 		}
 		intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
 		break;
@@ -1319,6 +1311,17 @@ int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
 	}
 }
 
+static void hsw_ddi_pll_disable(struct drm_i915_private *dev_priv,
+				struct intel_shared_dpll *pll)
+{
+	uint32_t val;
+
+	val = I915_READ(WRPLL_CTL(pll->id));
+	WARN_ON(!(val & WRPLL_PLL_ENABLE));
+	I915_WRITE(WRPLL_CTL(pll->id), val & ~WRPLL_PLL_ENABLE);
+	POSTING_READ(WRPLL_CTL(pll->id));
+}
+
 static bool hsw_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 				     struct intel_shared_dpll *pll,
 				     struct intel_dpll_hw_state *hw_state)
@@ -1352,6 +1355,7 @@ void intel_ddi_pll_init(struct drm_device *dev)
 	for (i = 0; i < 2; i++) {
 		dev_priv->shared_dplls[i].id = i;
 		dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i];
+		dev_priv->shared_dplls[i].disable = hsw_ddi_pll_disable;
 		dev_priv->shared_dplls[i].get_hw_state =
 			hsw_ddi_pll_get_hw_state;
 	}

drivers/gpu/drm/i915/intel_display.c

@@ -5224,9 +5224,11 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
 	if (HAS_IPS(dev))
 		hsw_compute_ips_config(crtc, pipe_config);
 
-	/* XXX: PCH clock sharing is done in ->mode_set, so make sure the old
-	 * clock survives for now. */
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
+	/*
+	 * XXX: PCH/WRPLL clock sharing is done in ->mode_set, so make sure the
+	 * old clock survives for now.
+	 */
+	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev) || HAS_DDI(dev))
 		pipe_config->shared_dpll = crtc->config.shared_dpll;
 
 	if (pipe_config->has_pch_encoder)