Commit 1210dde7 authored by Adrian Bunk's avatar Adrian Bunk Committed by David S. Miller

net/au1000_eth.c MDIO namespace fixes

Commit 2e888103
(phylib: add mdiobus_{read,write}) causes the
following compile error:

<--  snip  -->

...
  CC      drivers/net/au1000_eth.o
drivers/net/au1000_eth.c:252: error: conflicting types for 'mdiobus_read'
include/linux/phy.h:130: error: previous declaration of 'mdiobus_read' was here
drivers/net/au1000_eth.c:263: error: conflicting types for 'mdiobus_write'
include/linux/phy.h:131: error: previous declaration of 'mdiobus_write' was here
...
make[3]: *** [drivers/net/au1000_eth.o] Error 1

<--  snip  -->

This patch prefixes the driver functions with au1000_ 
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 51cf756c
......@@ -94,8 +94,8 @@ static irqreturn_t au1000_interrupt(int, void *);
static void au1000_tx_timeout(struct net_device *);
static void set_rx_mode(struct net_device *);
static int au1000_ioctl(struct net_device *, struct ifreq *, int);
static int mdio_read(struct net_device *, int, int);
static void mdio_write(struct net_device *, int, int, u16);
static int au1000_mdio_read(struct net_device *, int, int);
static void au1000_mdio_write(struct net_device *, int, int, u16);
static void au1000_adjust_link(struct net_device *);
static void enable_mac(struct net_device *, int);
......@@ -191,7 +191,7 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
/*
* MII operations
*/
static int mdio_read(struct net_device *dev, int phy_addr, int reg)
static int au1000_mdio_read(struct net_device *dev, int phy_addr, int reg)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
volatile u32 *const mii_control_reg = &aup->mac->mii_control;
......@@ -225,7 +225,8 @@ static int mdio_read(struct net_device *dev, int phy_addr, int reg)
return (int)*mii_data_reg;
}
static void mdio_write(struct net_device *dev, int phy_addr, int reg, u16 value)
static void au1000_mdio_write(struct net_device *dev, int phy_addr,
int reg, u16 value)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
volatile u32 *const mii_control_reg = &aup->mac->mii_control;
......@@ -249,7 +250,7 @@ static void mdio_write(struct net_device *dev, int phy_addr, int reg, u16 value)
*mii_control_reg = mii_control;
}
static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
static int au1000_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
{
/* WARNING: bus->phy_map[phy_addr].attached_dev == dev does
* _NOT_ hold (e.g. when PHY is accessed through other MAC's MII bus) */
......@@ -257,21 +258,21 @@ static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
enable_mac(dev, 0); /* make sure the MAC associated with this
* mii_bus is enabled */
return mdio_read(dev, phy_addr, regnum);
return au1000_mdio_read(dev, phy_addr, regnum);
}
static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
u16 value)
static int au1000_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
u16 value)
{
struct net_device *const dev = bus->priv;
enable_mac(dev, 0); /* make sure the MAC associated with this
* mii_bus is enabled */
mdio_write(dev, phy_addr, regnum, value);
au1000_mdio_write(dev, phy_addr, regnum, value);
return 0;
}
static int mdiobus_reset(struct mii_bus *bus)
static int au1000_mdiobus_reset(struct mii_bus *bus)
{
struct net_device *const dev = bus->priv;
......@@ -703,9 +704,9 @@ static struct net_device * au1000_probe(int port_num)
goto err_out;
aup->mii_bus->priv = dev;
aup->mii_bus->read = mdiobus_read;
aup->mii_bus->write = mdiobus_write;
aup->mii_bus->reset = mdiobus_reset;
aup->mii_bus->read = au1000_mdiobus_read;
aup->mii_bus->write = au1000_mdiobus_write;
aup->mii_bus->reset = au1000_mdiobus_reset;
aup->mii_bus->name = "au1000_eth_mii";
snprintf(aup->mii_bus->id, MII_BUS_ID_SIZE, "%x", aup->mac_id);
aup->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment