Commit 12150797 authored by Ondrej Zary's avatar Ondrej Zary Committed by Martin K. Petersen

ncr5380: Use runtime register mapping

Convert compile-time C400_ register mapping to runtime mapping.
This removes the weird negative register offsets and allows adding
additional mappings.

While at it, convert read/write loops into insb/outsb.
Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent f0394621
......@@ -163,8 +163,7 @@
/* Write any value to this register to start an ini mode DMA receive */
#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
/* NCR 53C400(A) Control Status Register bits: */
#define CSR_RESET 0x80 /* wo Resets 53c400 */
#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
......@@ -181,16 +180,6 @@
#define CSR_BASE CSR_53C80_INTR
#endif
/* Number of 128-byte blocks to be transferred */
#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
/* Resume transfer after disconnect */
#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
/* Access to host buffer stack */
#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
/* Note : PHASE_* macros are based on the values of the STATUS register */
#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
......
......@@ -253,6 +253,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
};
int flags;
struct Scsi_Host *instance;
struct NCR5380_hostdata *hostdata;
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
......@@ -394,6 +395,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL)
goto out_release;
hostdata = shost_priv(instance);
#ifndef SCSI_G_NCR5380_MEM
instance->io_port = overrides[current_override].NCR5380_map_name;
......@@ -403,18 +405,27 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
* On NCR53C400 boards, NCR5380 registers are mapped 8 past
* the base address.
*/
if (overrides[current_override].board == BOARD_NCR53C400)
if (overrides[current_override].board == BOARD_NCR53C400) {
instance->io_port += 8;
hostdata->c400_ctl_status = 0;
hostdata->c400_blk_cnt = 1;
hostdata->c400_host_buf = 4;
}
#else
instance->base = overrides[current_override].NCR5380_map_name;
((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
hostdata->iomem = iomem;
if (overrides[current_override].board == BOARD_NCR53C400) {
hostdata->c400_ctl_status = 0x100;
hostdata->c400_blk_cnt = 0x101;
hostdata->c400_host_buf = 0x104;
}
#endif
if (NCR5380_init(instance, flags))
goto out_unregister;
if (overrides[current_override].board == BOARD_NCR53C400)
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
NCR5380_maybe_reset_bus(instance);
......@@ -522,31 +533,25 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
#ifdef SCSI_G_NCR5380_MEM
struct NCR5380_hostdata *hostdata = shost_priv(instance);
#endif
int blocks = len / 128;
int start = 0;
int bl;
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
}
if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
{
int i;
for (i = 0; i < 128; i++)
dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
}
insb(instance->io_port + hostdata->c400_host_buf,
dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start,
......@@ -557,17 +562,12 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
}
if (blocks) {
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
{
// FIXME - no timeout
}
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
{
int i;
for (i = 0; i < 128; i++)
dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
}
insb(instance->io_port + hostdata->c400_host_buf,
dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_fromio(dst + start,
......@@ -577,7 +577,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
blocks--;
}
if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
printk("53C400r: no 53C80 gated irq after transfer");
#if 0
......@@ -585,7 +585,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
* DON'T DO THIS - THEY NEVER ARRIVE!
*/
printk("53C400r: Waiting for 53C80 registers\n");
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)
;
#endif
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
......@@ -606,32 +606,26 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
#ifdef SCSI_G_NCR5380_MEM
struct NCR5380_hostdata *hostdata = shost_priv(instance);
#endif
int blocks = len / 128;
int start = 0;
int bl;
int i;
NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
}
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
#ifndef SCSI_G_NCR5380_MEM
{
for (i = 0; i < 128; i++)
NCR5380_write(C400_HOST_BUFFER, src[start + i]);
}
outsb(instance->io_port + hostdata->c400_host_buf,
src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
......@@ -641,14 +635,12 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
blocks--;
}
if (blocks) {
while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - no timeout
#ifndef SCSI_G_NCR5380_MEM
{
for (i = 0; i < 128; i++)
NCR5380_write(C400_HOST_BUFFER, src[start + i]);
}
outsb(instance->io_port + hostdata->c400_host_buf,
src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
......@@ -660,7 +652,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
#if 0
printk("53C400w: waiting for registers to be available\n");
THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
THEY NEVER DO ! while (NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG);
printk("53C400w: Got em\n");
#endif
......@@ -668,7 +660,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
/* All documentation says to check for this. Maybe my hardware is too
* fast. Waiting for it seems to work fine! KLL
*/
while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
while (!(i = NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
; // FIXME - no timeout
/*
......
......@@ -29,7 +29,6 @@
#define NCR5380_map_type int
#define NCR5380_map_name port
#define NCR53C400_register_offset 0
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
......@@ -42,7 +41,10 @@
#define NCR5380_write(reg, value) \
outb(value, instance->io_port + (reg))
#define NCR5380_implementation_fields /* none */
#define NCR5380_implementation_fields \
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf;
#else
/* therefore SCSI_G_NCR5380_MEM */
......@@ -50,7 +52,6 @@
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
#define NCR53C400_register_offset 0x108
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
......@@ -63,7 +64,10 @@
NCR53C400_mem_base + (reg))
#define NCR5380_implementation_fields \
void __iomem *iomem;
void __iomem *iomem; \
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf;
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment