i.MX51 iomux: Fixes MX51_PAD_UART2_TXD__UART2_TXD & MX51_PAD_USBH1_DATA2__UART2_TXD declarations

Fixes 2 small regressions of recent iomux changes:
 - current MX51_PAD_UART2_TXD__UART2_TXD declaration overwrites
   IOMUXC_UART2_IPP_UART_RXD_MUX_SELECT_INPUT register (0x09ec) and prevent
   UART2 Rx from working properly.
   (Tested on my custom i.MX51 board where UART2 is used as console)
 - current MX51_PAD_USBH1_DATA2__UART2_TXD declaration also has the same problem.
   (Not tested)
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/plat-mxc/include/mach/iomux-mx51.h

@@ -473,7 +473,7 @@
 #define _MX51_PAD_UART2_RXD__UART2_RXD		IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
 #define _MX51_PAD_UART2_TXD__FIRI_RXD		IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
 #define _MX51_PAD_UART2_TXD__GPIO1_21		IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0)
+#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0)
 #define _MX51_PAD_UART3_RXD__CSI1_D0		IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
 #define _MX51_PAD_UART3_RXD__GPIO1_22		IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
 #define _MX51_PAD_UART3_RXD__UART1_DTR		IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
@@ -528,7 +528,7 @@
 #define _MX51_PAD_USBH1_DATA1__UART2_RXD	IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0)
 #define _MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA2__GPIO1_13		IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0)
+#define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA3__GPIO1_14		IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0)
 #define _MX51_PAD_USBH1_DATA3__UART2_RTS	IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0)