ARM: dts: ixp4xx: use "okay" for status

"okay" over "ok" is preferred for status property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230127101832.93789-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230310231420.583121-1-linus.walleij@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts

@@ -56,7 +56,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Coyote PCI boardfile.
@@ -80,7 +80,7 @@ pci@c0000000 {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -102,7 +102,7 @@ phy5: ethernet-phy@5 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts

@@ -112,7 +112,7 @@ watchdog@5,0 {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Vulcan PCI boardfile.
@@ -137,7 +137,7 @@ pci@c0000000 {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -159,7 +159,7 @@ phy1: ethernet-phy@1 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts

@@ -122,7 +122,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)

arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts

@@ -159,7 +159,7 @@ led@0,5 {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Written based on the FSG-3 PCI boardfile.
@@ -187,7 +187,7 @@ pci@c0000000 {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -209,7 +209,7 @@ phy5: ethernet-phy@5 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts

@@ -53,7 +53,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
@@ -74,7 +74,7 @@ pci@c0000000 {
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -91,7 +91,7 @@ phy1: ethernet-phy@1 {
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts

@@ -108,7 +108,7 @@ ide@1,0 {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from Avila PCI boardfile.
@@ -142,7 +142,7 @@ pci@c0000000 {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -164,7 +164,7 @@ phy1: ethernet-phy@1 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts

@@ -82,7 +82,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
@@ -148,7 +148,7 @@ hss@1 {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 32>;
 			phy-mode = "rgmii";
@@ -170,7 +170,7 @@ phy1: ethernet-phy@1 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 33>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts

@@ -109,7 +109,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
@@ -129,7 +129,7 @@ pci@c0000000 {
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-ixdp425.dts

@@ -40,7 +40,7 @@ partitions {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -62,7 +62,7 @@ phy1: ethernet-phy@1 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts

@@ -61,7 +61,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDPG425 PCI boardfile.
@@ -95,7 +95,7 @@ pci@c0000000 {
 
 		/* EthB */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -117,7 +117,7 @@ phy5: ethernet-phy@5 {
 
 		/* EthC */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts

@@ -116,7 +116,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
@@ -143,7 +143,7 @@ pci@c0000000 {
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts

@@ -117,7 +117,7 @@ partition@240000 {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
@@ -141,7 +141,7 @@ pci@c0000000 {
 		 * Do we need a new binding and property for this?
 		 */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
@@ -165,7 +165,7 @@ phy5: ethernet-phy@5 {
 
 		/* EthC - connected to KS8995 switch port 5 */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts

@@ -54,7 +54,7 @@ partitions {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
@@ -77,7 +77,7 @@ pci@c0000000 {
 		};
 
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts

@@ -79,7 +79,7 @@ partition@fff000 {
 
 		/* LAN port */
 		ethernet@c8009000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts

@@ -121,7 +121,7 @@ ide@3,0 {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * In the boardfile for the Cambria from OpenWRT the interrupts
@@ -167,7 +167,7 @@ pci@c0000000 {
 		};
 
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -188,7 +188,7 @@ phy2: ethernet-phy@2 {
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp43x-kixrp435.dts

@@ -36,7 +36,7 @@ partitions {
 
 		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
 		ethernet@c800a000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 4>;
 			queue-txready = <&qmgr 21>;
 			phy-mode = "rgmii";
@@ -57,7 +57,7 @@ phy2: ethernet-phy@2 {
 		};
 
 		ethernet@c800c000 {
-			status = "ok";
+			status = "okay";
 			queue-rx = <&qmgr 2>;
 			queue-txready = <&qmgr 19>;
 			phy-mode = "rgmii";

arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi

@@ -99,7 +99,7 @@ fs@800000 {
 		};
 
 		pci@c0000000 {
-			status = "ok";
+			status = "okay";
 
 			/*
 			 * Taken from IXDP425 PCI boardfile.