arm64: dts: rockchip: Update WIFi/BT related nodes on rk3308-rock-pi-s

Update WiFi SDIO and BT UART related props to better reflect details
about the optional onboard RTL8723DS WiFi/BT module.

Also correct the compatible used for bluetooth to match the WiFi/BT
module used on the board.

Fixes: bc3753ae ("arm64: dts: rockchip: rock-pi-s add more peripherals")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240521211029.1236094-14-jonas@kwiboo.seSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts

@@ -15,6 +15,7 @@ aliases {
 		ethernet0 = &gmac;
 		mmc0 = &emmc;
 		mmc1 = &sdmmc;
+		mmc2 = &sdio;
 	};
 
 	chosen {
@@ -237,6 +238,20 @@ &pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rtc_32k>;
 
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gmac {
 		mac_rst: mac-rst {
 			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -286,11 +301,24 @@ &sdio {
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <1000000>;
+	max-frequency = <100000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
 	non-removable;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
+
+	rtl8723ds: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+	};
 };
 
 &sdmmc {
@@ -322,12 +350,16 @@ &uart0 {
 };
 
 &uart4 {
+	uart-has-rtscts;
 	status = "okay";
 
 	bluetooth {
-		compatible = "realtek,rtl8723bs-bt";
-		device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		compatible = "realtek,rtl8723ds-bt";
+		device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
 	};
 };