Commit 1359d73c authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

bnx2x: Correct asymmetric flow-control

This fixes several issues relating to asymmetric configuration:
 1. When user requests to disable TX, the local-device needs to
    advertise both PAUSE and ASM_DIR, but to avoid transmitting pause
    frames. In the 578xx, it would ignore the TX disable.

 2. When user advertises RX-only, ASM_DIR was advertised instead of
    PAUSE/ASM_DIR.

 3. When changing mode, the advertised PAUSE/ASM_DIR was not cleared
    before setting new one, so disabling RX or TX had no impact on the
    'advertised' as appeared in the 'ethtool -a' output.
Signed-off-by: default avatarYaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b175c3a4
......@@ -3392,9 +3392,9 @@ static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
case BNX2X_FLOW_CTRL_AUTO:
switch (params->req_fc_auto_adv) {
case BNX2X_FLOW_CTRL_BOTH:
case BNX2X_FLOW_CTRL_RX:
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
break;
case BNX2X_FLOW_CTRL_RX:
case BNX2X_FLOW_CTRL_TX:
*ieee_fc |=
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
......@@ -3488,14 +3488,21 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
}
static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
{ /* LD LP */
static void bnx2x_pause_resolve(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars,
u32 pause_result)
{
struct bnx2x *bp = params->bp;
/* LD LP */
switch (pause_result) { /* ASYM P ASYM P */
case 0xb: /* 1 0 1 1 */
DP(NETIF_MSG_LINK, "Flow Control: TX only\n");
vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
break;
case 0xe: /* 1 1 1 0 */
DP(NETIF_MSG_LINK, "Flow Control: RX only\n");
vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
break;
......@@ -3503,10 +3510,22 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
case 0x7: /* 0 1 1 1 */
case 0xd: /* 1 1 0 1 */
case 0xf: /* 1 1 1 1 */
vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
/* If the user selected to advertise RX ONLY,
* although we advertised both, need to enable
* RX only.
*/
if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) {
DP(NETIF_MSG_LINK, "Flow Control: RX & TX\n");
vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
} else {
DP(NETIF_MSG_LINK, "Flow Control: RX only\n");
vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
}
break;
default:
DP(NETIF_MSG_LINK, "Flow Control: None\n");
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
break;
}
if (pause_result & (1<<0))
......@@ -3567,7 +3586,7 @@ static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy,
pause_result |= (lp_pause &
MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", pause_result);
bnx2x_pause_resolve(vars, pause_result);
bnx2x_pause_resolve(phy, params, vars, pause_result);
}
......@@ -5396,7 +5415,7 @@ static void bnx2x_update_adv_fc(struct bnx2x_phy *phy,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n", pause_result);
}
bnx2x_pause_resolve(vars, pause_result);
bnx2x_pause_resolve(phy, params, vars, pause_result);
}
......@@ -7129,7 +7148,7 @@ static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy,
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
bnx2x_pause_resolve(vars, pause_result);
bnx2x_pause_resolve(phy, params, vars, pause_result);
DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n",
pause_result);
}
......
......@@ -2287,13 +2287,11 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode)
void bnx2x_calc_fc_adv(struct bnx2x *bp)
{
u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
switch (bp->link_vars.ieee_fc &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
......@@ -2304,8 +2302,6 @@ void bnx2x_calc_fc_adv(struct bnx2x *bp)
break;
default:
bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment