Merge tag 'for-4.20/libata-20181021' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "Here are the libata changes queued up for 4.20:

   - %pOFn device_node.name conversion (Rob Herring)

   - Use LBAM/LBAH password defines instead of hardcoding (Linus
     Walleij)

   - Series adding support for the allwinner R40 AHCI controller
     (Corentin Labbe)

   - Disable ALPM for Ampere Computing device (Suman Tripathi)

   - ahci bcrm fixes (Florian Fainelli)

   - Redundant Kconfig defaults (Bartlomiej Zolnierkiewicz)

   - Code cleanups (Nathan Chancellor)"

* tag 'for-4.20/libata-20181021' of git://git.kernel.dk/linux-block:
  ata: remove redundant 'default n' from Kconfig
  ata: ep93xx: Use proper enums for directions
  ata: ahci_brcm: Allow using driver or DSL SoCs
  ata: ahci_brcm: Match BCM63138 compatible strings
  ata: ahci_brcm: Allow optional reset controller to be used
  dt-bindings: ata: Document BCM63138 compatible string
  pata_atiixp: Remove unnecessary parentheses
  ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
  dt-bindings: ata: update ahci_sunxi bindings
  ata: ahci_sunxi: add support for r40
  dt-bindings: ata: ahci-platform: document phy-supply
  ata: ahci_platform: add support for PHY controller regulator
  dt-bindings: ata: ahci-platform: document ahci-supply
  ata: ahci_platform: add support for AHCI controller regulator
  dt-bindings: ata: ahci-platform: fix indentation of target-supply
  libata: Use SMART LBAM/LBAH password defines
  ata: ahci: Convert to using %pOFn instead of device_node.name

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -10,6 +10,7 @@ PHYs.
 Required properties:
 - compatible        : compatible string, one of:
   - "allwinner,sun4i-a10-ahci"
+  - "allwinner,sun8i-r40-ahci"
   - "brcm,iproc-ahci"
   - "hisilicon,hisi-ahci"
   - "cavium,octeon-7130-ahci"
@@ -31,8 +32,10 @@ Optional properties:
 - clocks            : a list of phandle + clock specifier pairs
 - resets            : a list of phandle + reset specifier pairs
 - target-supply     : regulator for SATA target power
+- phy-supply        : regulator for PHY power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"
+- ahci-supply       : regulator for AHCI controller
 - ports-implemented : Mask that indicates which ports that the HBA supports
 		      are available for software to use. Useful if PORTS_IMPL
 		      is not programmed by the BIOS, which is true with
@@ -42,12 +45,13 @@ Required properties when using sub-nodes:
 - #address-cells    : number of cells to encode an address
 - #size-cells       : number of cells representing the size of an address
 
+For allwinner,sun8i-r40-ahci, the reset propertie must be present.
 
 Sub-nodes required properties:
 - reg		    : the port number
 And at least one of the following properties:
 - phys		    : reference to the SATA PHY node
-- target-supply    : regulator for SATA target power
+- target-supply     : regulator for SATA target power
 
 Examples:
         sata@ffe08000 {

Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt

@@ -9,6 +9,7 @@ Required properties:
 			"brcm,bcm7445-ahci"
 			"brcm,bcm-nsp-ahci"
 			"brcm,sata3-ahci"
+			"brcm,bcm63138-ahci"
 - reg                : register mappings for AHCI and SATA_TOP_CTRL
 - reg-names          : "ahci" and "top-ctrl"
 - interrupts         : interrupt mapping for SATA IRQ

drivers/ata/Kconfig

@@ -33,7 +33,6 @@ if ATA
 
 config ATA_NONSTANDARD
        bool
-       default n
 
 config ATA_VERBOSE_ERROR
 	bool "Verbose ATA error reporting"
@@ -62,7 +61,6 @@ config ATA_ACPI
 config SATA_ZPODD
 	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
 	depends on ATA_ACPI && PM
-	default n
 	help
 	  This option adds support for SATA Zero Power Optical Disc
 	  Drive (ZPODD). It requires both the ODD and the platform
@@ -121,7 +119,8 @@ config SATA_AHCI_PLATFORM
 
 config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
+		   ARCH_BCM_63XX
 	help
 	  This option enables support for the AHCI SATA3 controller found on
 	  Broadcom SoC's.

drivers/ata/ahci.h

@@ -352,6 +352,8 @@ struct ahci_host_priv {
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
 	struct reset_control	*rsts;		/* Optional */
 	struct regulator	**target_pwrs;	/* Optional */
+	struct regulator	*ahci_regulator;/* Optional */
+	struct regulator	*phy_regulator;/* Optional */
 	/*
 	 * If platform uses PHYs. There is a 1:1 relation between the port number and
 	 * the PHY position in this array.

drivers/ata/ahci_brcm.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/string.h>
 
 #include "ahci.h"
@@ -94,6 +95,7 @@ struct brcm_ahci_priv {
 	u32 port_mask;
 	u32 quirks;
 	enum brcm_ahci_version version;
+	struct reset_control *rcdev;
 };
 
 static inline u32 brcm_sata_readreg(void __iomem *addr)
@@ -381,6 +383,7 @@ static struct scsi_host_template ahci_platform_sht = {
 static const struct of_device_id ahci_of_match[] = {
 	{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
 	{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
+	{.compatible = "brcm,bcm63138-ahci", .data = (void *)BRCM_SATA_BCM7445},
 	{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
 	{},
 };
@@ -411,6 +414,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->top_ctrl))
 		return PTR_ERR(priv->top_ctrl);
 
+	/* Reset is optional depending on platform */
+	priv->rcdev = devm_reset_control_get(&pdev->dev, "ahci");
+	if (!IS_ERR_OR_NULL(priv->rcdev))
+		reset_control_deassert(priv->rcdev);
+
 	if ((priv->version == BRCM_SATA_BCM7425) ||
 		(priv->version == BRCM_SATA_NSP)) {
 		priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;

drivers/ata/ahci_platform.c

@@ -33,6 +33,13 @@ static const struct ata_port_info ahci_port_info = {
 	.port_ops	= &ahci_platform_ops,
 };
 
+static const struct ata_port_info ahci_port_info_nolpm = {
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_LPM,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_platform_ops,
+};
+
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),
 };
@@ -41,6 +48,7 @@ static int ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
+	const struct ata_port_info *port;
 	int rc;
 
 	hpriv = ahci_platform_get_resources(pdev,
@@ -58,7 +66,11 @@ static int ahci_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
 		hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
 
-	rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+	port = acpi_device_get_match_data(dev);
+	if (!port)
+		port = &ahci_port_info;
+
+	rc = ahci_platform_init_host(pdev, hpriv, port,
 				     &ahci_platform_sht);
 	if (rc)
 		goto disable_resources;
@@ -85,6 +97,7 @@ static const struct of_device_id ahci_of_match[] = {
 MODULE_DEVICE_TABLE(of, ahci_of_match);
 
 static const struct acpi_device_id ahci_acpi_match[] = {
+	{ "APMC0D33", (unsigned long)&ahci_port_info_nolpm },
 	{ ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
 	{},
 };

drivers/ata/ahci_sunxi.c

@@ -181,7 +181,7 @@ static int ahci_sunxi_probe(struct platform_device *pdev)
 	struct ahci_host_priv *hpriv;
 	int rc;
 
-	hpriv = ahci_platform_get_resources(pdev, 0);
+	hpriv = ahci_platform_get_resources(pdev, AHCI_PLATFORM_GET_RESETS);
 	if (IS_ERR(hpriv))
 		return PTR_ERR(hpriv);
 
@@ -250,6 +250,7 @@ static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
 
 static const struct of_device_id ahci_sunxi_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-ahci", },
+	{ .compatible = "allwinner,sun8i-r40-ahci", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);

drivers/ata/libahci_platform.c

@@ -139,7 +139,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
  * ahci_platform_enable_regulators - Enable regulators
  * @hpriv: host private area to store config values
  *
- * This function enables all the regulators found in
+ * This function enables all the regulators found in controller and
  * hpriv->target_pwrs, if any.  If a regulator fails to be enabled, it
  * disables all the regulators already enabled in reverse order and
  * returns an error.
@@ -151,6 +151,18 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
 {
 	int rc, i;
 
+	if (hpriv->ahci_regulator) {
+		rc = regulator_enable(hpriv->ahci_regulator);
+		if (rc)
+			return rc;
+	}
+
+	if (hpriv->phy_regulator) {
+		rc = regulator_enable(hpriv->phy_regulator);
+		if (rc)
+			goto disable_ahci_pwrs;
+	}
+
 	for (i = 0; i < hpriv->nports; i++) {
 		if (!hpriv->target_pwrs[i])
 			continue;
@@ -167,6 +179,11 @@ int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
 		if (hpriv->target_pwrs[i])
 			regulator_disable(hpriv->target_pwrs[i]);
 
+	if (hpriv->phy_regulator)
+		regulator_disable(hpriv->phy_regulator);
+disable_ahci_pwrs:
+	if (hpriv->ahci_regulator)
+		regulator_disable(hpriv->ahci_regulator);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
@@ -175,7 +192,8 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
  * ahci_platform_disable_regulators - Disable regulators
  * @hpriv: host private area to store config values
  *
- * This function disables all regulators found in hpriv->target_pwrs.
+ * This function disables all regulators found in hpriv->target_pwrs and
+ * AHCI controller.
  */
 void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
 {
@@ -186,6 +204,11 @@ void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
 			continue;
 		regulator_disable(hpriv->target_pwrs[i]);
 	}
+
+	if (hpriv->ahci_regulator)
+		regulator_disable(hpriv->ahci_regulator);
+	if (hpriv->phy_regulator)
+		regulator_disable(hpriv->phy_regulator);
 }
 EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
 /**
@@ -303,8 +326,8 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
 		/* No PHY support. Check if PHY is required. */
 		if (of_find_property(node, "phys", NULL)) {
 			dev_err(dev,
-				"couldn't get PHY in node %s: ENOSYS\n",
-				node->name);
+				"couldn't get PHY in node %pOFn: ENOSYS\n",
+				node);
 			break;
 		}
 		/* fall through */
@@ -316,8 +339,8 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
 
 	default:
 		dev_err(dev,
-			"couldn't get PHY in node %s: %d\n",
-			node->name, rc);
+			"couldn't get PHY in node %pOFn: %d\n",
+			node, rc);
 
 		break;
 	}
@@ -351,6 +374,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
  *
  * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
  * 2) regulator for controlling the targets power (optional)
+ *    regulator for controlling the AHCI controller (optional)
  * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
  *    or for non devicetree enabled platforms a single clock
  * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
@@ -408,6 +432,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
 		hpriv->clks[i] = clk;
 	}
 
+	hpriv->ahci_regulator = devm_regulator_get_optional(dev, "ahci");
+	if (IS_ERR(hpriv->ahci_regulator)) {
+		rc = PTR_ERR(hpriv->ahci_regulator);
+		if (rc == -EPROBE_DEFER)
+			goto err_out;
+		rc = 0;
+		hpriv->ahci_regulator = NULL;
+	}
+
+	hpriv->phy_regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(hpriv->phy_regulator)) {
+		rc = PTR_ERR(hpriv->phy_regulator);
+		if (rc == -EPROBE_DEFER)
+			goto err_out;
+		rc = 0;
+		hpriv->phy_regulator = NULL;
+	}
+
 	if (flags & AHCI_PLATFORM_GET_RESETS) {
 		hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
 		if (IS_ERR(hpriv->rsts)) {

drivers/ata/libata-scsi.c

@@ -639,8 +639,8 @@ int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg)
 	if (args[0] == ATA_CMD_SMART) { /* hack -- ide driver does this too */
 		scsi_cmd[6]  = args[3];
 		scsi_cmd[8]  = args[1];
-		scsi_cmd[10] = 0x4f;
-		scsi_cmd[12] = 0xc2;
+		scsi_cmd[10] = ATA_SMART_LBAM_PASS;
+		scsi_cmd[12] = ATA_SMART_LBAH_PASS;
 	} else {
 		scsi_cmd[6]  = args[1];
 	}

drivers/ata/pata_atiixp.c

@@ -279,7 +279,7 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	const struct ata_port_info *ppi[] = { &info, &info };
 
 	/* SB600 doesn't have secondary port wired */
-	if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE))
+	if (pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE)
 		ppi[1] = &ata_dummy_port_info;
 
 	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,

drivers/ata/pata_ep93xx.c

@@ -659,7 +659,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 	 * start of new transfer.
 	 */
 	drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
-	drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
+	drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
 	drv_data->dma_rx_data.name = "ep93xx-pata-rx";
 	drv_data->dma_rx_channel = dma_request_channel(mask,
 		ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
@@ -667,7 +667,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 		return;
 
 	drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
-	drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
+	drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
 	drv_data->dma_tx_data.name = "ep93xx-pata-tx";
 	drv_data->dma_tx_channel = dma_request_channel(mask,
 		ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
@@ -678,7 +678,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 
 	/* Configure receive channel direction and source address */
 	memset(&conf, 0, sizeof(conf));
-	conf.direction = DMA_FROM_DEVICE;
+	conf.direction = DMA_DEV_TO_MEM;
 	conf.src_addr = drv_data->udma_in_phys;
 	conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
@@ -689,7 +689,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 
 	/* Configure transmit channel direction and destination address */
 	memset(&conf, 0, sizeof(conf));
-	conf.direction = DMA_TO_DEVICE;
+	conf.direction = DMA_MEM_TO_DEV;
 	conf.dst_addr = drv_data->udma_out_phys;
 	conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {