[WATCHDOG] More coding-style and trivial clean-up

Some more cleaning-up of the watchdog drivers.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

drivers/watchdog/acquirewdt.c

 /*
  *	Acquire Single Board Computer Watchdog Timer driver
  *
- *      Based on wdt.c. Original copyright messages:
+ *	Based on wdt.c. Original copyright messages:
  *
  *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
  *						All Rights Reserved.
@@ -17,9 +17,9 @@
  *
  *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
- *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- *          Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- *          Can't add timeout - driver doesn't allow changing value
+ *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *	    Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *	    Can't add timeout - driver doesn't allow changing value
  */
 
 /*

drivers/watchdog/advantechwdt.c

@@ -138,7 +138,9 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	void __user *argp = (void __user *)arg;
 	int __user *p = argp;
 	static struct watchdog_info ident = {
-		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+		.options = WDIOF_KEEPALIVEPING |
+			   WDIOF_SETTIMEOUT |
+			   WDIOF_MAGICCLOSE,
 		.firmware_version = 1,
 		.identity = WATCHDOG_NAME,
 	};
@@ -259,7 +261,8 @@ static int __devinit advwdt_probe(struct platform_device *dev)
 		goto unreg_stop;
 	}
 
-	/* Check that the heartbeat value is within it's range ; if not reset to the default */
+	/* Check that the heartbeat value is within it's range ;
+	 * if not reset to the default */
 	if (advwdt_set_heartbeat(timeout)) {
 		advwdt_set_heartbeat(WATCHDOG_TIMEOUT);
 		printk(KERN_INFO PFX

drivers/watchdog/alim1535_wdt.c

@@ -60,7 +60,7 @@ static void ali_start(void)
 
 	pci_read_config_dword(ali_pci, 0xCC, &val);
 	val &= ~0x3F;	/* Mask count */
-	val |= (1<<25) | ali_timeout_bits;
+	val |= (1 << 25) | ali_timeout_bits;
 	pci_write_config_dword(ali_pci, 0xCC, val);
 
 	spin_unlock(&ali_lock);
@@ -79,8 +79,8 @@ static void ali_stop(void)
 	spin_lock(&ali_lock);
 
 	pci_read_config_dword(ali_pci, 0xCC, &val);
-	val &= ~0x3F;	/* Mask count to zero (disabled) */
-	val &= ~(1<<25);/* and for safety mask the reset enable */
+	val &= ~0x3F;		/* Mask count to zero (disabled) */
+	val &= ~(1 << 25);	/* and for safety mask the reset enable */
 	pci_write_config_dword(ali_pci, 0xCC, val);
 
 	spin_unlock(&ali_lock);
@@ -89,7 +89,7 @@ static void ali_stop(void)
 /*
  *	ali_keepalive	-	send a keepalive to the watchdog
  *
- *      Send a keepalive to the timer (actually we restart the timer).
+ *	Send a keepalive to the timer (actually we restart the timer).
  */
 
 static void ali_keepalive(void)
@@ -109,11 +109,11 @@ static int ali_settimer(int t)
 	if (t < 0)
 		return -EINVAL;
 	else if (t < 60)
-		ali_timeout_bits = t|(1<<6);
+		ali_timeout_bits = t|(1 << 6);
 	else if (t < 3600)
-		ali_timeout_bits = (t/60)|(1<<7);
+		ali_timeout_bits = (t / 60)|(1 << 7);
 	else if (t < 18000)
-		ali_timeout_bits = (t/300)|(1<<6)|(1<<7);
+		ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
 	else
 		return -EINVAL;
 
@@ -138,7 +138,7 @@ static int ali_settimer(int t)
  */
 
 static ssize_t ali_write(struct file *file, const char __user *data,
-			      size_t len, loff_t *ppos)
+						size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (len) {
@@ -348,9 +348,9 @@ static int __init ali_find_watchdog(void)
 	/* Timer bits */
 	wdog &= ~0x3F;
 	/* Issued events */
-	wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24));
+	wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24));
 	/* No monitor bits */
-	wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9));
+	wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9));
 
 	pci_write_config_dword(pdev, 0xCC, wdog);
 

drivers/watchdog/alim7101_wdt.c

@@ -355,7 +355,8 @@ static int __init alim7101_wdt_init(void)
 	alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
 		NULL);
 	if (!alim7101_pmu) {
-		printk(KERN_INFO PFX "ALi M7101 PMU not present - WDT not set\n");
+		printk(KERN_INFO PFX
+			"ALi M7101 PMU not present - WDT not set\n");
 		return -EBUSY;
 	}
 
@@ -399,7 +400,8 @@ static int __init alim7101_wdt_init(void)
 
 	rc = misc_register(&wdt_miscdev);
 	if (rc) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
 			wdt_miscdev.minor, rc);
 		goto err_out_reboot;
 	}

drivers/watchdog/at91sam9_wdt.c

@@ -201,7 +201,7 @@ static long at91_wdt_ioctl(struct file *file,
  * Pat the watchdog whenever device is written to.
  */
 static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len,
-      loff_t *ppos)
+								loff_t *ppos)
 {
 	if (!len)
 		return 0;

drivers/watchdog/eurotechwdt.c

@@ -8,19 +8,19 @@
  *	Based on wdt.c.
  *	Original copyright messages:
  *
- *      (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
  *						All Rights Reserved.
  *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
  *
- *      Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
- *      warranty for any of this software. This material is provided
- *      "AS-IS" and at no charge.
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
  *
- *      (c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>*
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>*
  */
 
 /* Changelog:
@@ -37,7 +37,7 @@
  *	add expect_close support
  *
  * 2002.05.30 - Joel Becker <joel.becker@oracle.com>
- * 	Added Matt Domsch's nowayout module option.
+ *	Added Matt Domsch's nowayout module option.
  */
 
 /*
@@ -151,7 +151,7 @@ static void eurwdt_activate_timer(void)
 	if (irq == 0)
 		printk(KERN_INFO ": interrupt disabled\n");
 
-	eurwdt_write_reg(WDT_TIMER_CFG, irq<<4);
+	eurwdt_write_reg(WDT_TIMER_CFG, irq << 4);
 
 	eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS);	/* we use seconds */
 	eurwdt_set_timeout(0);	/* the default timeout */

drivers/watchdog/geodewdt.c

@@ -34,11 +34,15 @@
 
 static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=131, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 static struct platform_device *geodewdt_platform_device;
 static unsigned long wdt_flags;
@@ -269,7 +273,8 @@ static int __init geodewdt_init(void)
 	if (ret)
 		return ret;
 
-	geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+	geodewdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
 	if (IS_ERR(geodewdt_platform_device)) {
 		ret = PTR_ERR(geodewdt_platform_device);
 		goto err;

drivers/watchdog/hpwdt.c

@@ -137,7 +137,8 @@ static struct pci_device_id hpwdt_devices[] = {
 };
 MODULE_DEVICE_TABLE(pci, hpwdt_devices);
 
-extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
+						unsigned long *pRomEntry);
 
 #ifndef CONFIG_X86_64
 /* --32 Bit Bios------------------------------------------------------------ */

drivers/watchdog/i6300esb.c

@@ -240,7 +240,8 @@ static ssize_t esb_write(struct file *file, const char __user *data,
 			 * five months ago... */
 			esb_expect_close = 0;
 
-			/* scan to see whether or not we got the magic character */
+			/* scan to see whether or not we got the
+			 * magic character */
 			for (i = 0; i != len; i++) {
 				char c;
 				if (get_user(c, data + i))

drivers/watchdog/iTCO_vendor_support.c

@@ -47,7 +47,8 @@
 
 static int vendorsupport;
 module_param(vendorsupport, int, 0);
-MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
+MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
+			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
 
 /*
  *	Vendor Specific Support
@@ -305,7 +306,8 @@ static void __exit iTCO_vendor_exit_module(void)
 module_init(iTCO_vendor_init_module);
 module_exit(iTCO_vendor_exit_module);
 
-MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, R. Seretny <lkpatches@paypc.com>");
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
+		"R. Seretny <lkpatches@paypc.com>");
 MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");

drivers/watchdog/iTCO_wdt.c

@@ -273,7 +273,9 @@ static struct platform_device *iTCO_wdt_platform_device;
 #define WATCHDOG_HEARTBEAT 30	/* 30 sec default heartbeat */
 static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+	"(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
@@ -346,7 +348,8 @@ static int iTCO_wdt_start(void)
 	/* disable chipset's NO_REBOOT bit */
 	if (iTCO_wdt_unset_NO_REBOOT_bit()) {
 		spin_unlock(&iTCO_wdt_private.io_lock);
-		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
+					"reboot disabled by hardware\n");
 		return -EIO;
 	}
 
@@ -669,7 +672,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 
 	/* Check chipset's NO_REBOOT bit */
 	if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
-		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+		printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, "
+					"reboot disabled by hardware\n");
 		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
 		goto out;
 	}
@@ -716,8 +720,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	   if not reset to the default */
 	if (iTCO_wdt_set_heartbeat(heartbeat)) {
 		iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
-		printk(KERN_INFO PFX "heartbeat value must be 2 < heartbeat < 39 (TCO v1) or 613 (TCO v2), using %d\n",
-							heartbeat);
+		printk(KERN_INFO PFX
+			"heartbeat value must be 2 < heartbeat < 39 (TCO v1) "
+				"or 613 (TCO v2), using %d\n", heartbeat);
 	}
 
 	ret = misc_register(&iTCO_wdt_miscdev);

drivers/watchdog/it87_wdt.c

@@ -188,8 +188,8 @@ static inline int superio_inb(int reg)
 
 static inline void superio_outb(int val, int reg)
 {
-       outb(reg, REG);
-       outb(val, VAL);
+	outb(reg, REG);
+	outb(val, VAL);
 }
 
 static inline int superio_inw(int reg)
@@ -204,10 +204,10 @@ static inline int superio_inw(int reg)
 
 static inline void superio_outw(int val, int reg)
 {
-       outb(reg++, REG);
-       outb(val >> 8, VAL);
-       outb(reg, REG);
-       outb(val, VAL);
+	outb(reg++, REG);
+	outb(val >> 8, VAL);
+	outb(reg, REG);
+	outb(val, VAL);
 }
 
 /* watchdog timer handling */

drivers/watchdog/mpc5200_wdt.c

@@ -9,8 +9,8 @@
 #include <asm/mpc52xx.h>
 
 
-#define GPT_MODE_WDT		(1<<15)
-#define GPT_MODE_CE		(1<<12)
+#define GPT_MODE_WDT		(1 << 15)
+#define GPT_MODE_CE		(1 << 12)
 #define GPT_MODE_MS_TIMER	(0x4)
 
 

drivers/watchdog/mpcore_wdt.c

@@ -5,7 +5,7 @@
  *
  *	Based on the SoftDog driver:
  *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
- * 						All Rights Reserved.
+ *						All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License

drivers/watchdog/mtx-1_wdt.c

@@ -5,7 +5,7 @@
  *							All Rights Reserved.
  *                              http://www.4g-systems.biz
  *
- * 	(C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *	(C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License

drivers/watchdog/pc87413_wdt.c

@@ -536,7 +536,8 @@ static int __init pc87413_init(void)
 
 	ret = misc_register(&pc87413_miscdev);
 	if (ret != 0) {
-		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+		printk(KERN_ERR PFX
+			"cannot register miscdev on minor=%d (err=%d)\n",
 			WATCHDOG_MINOR, ret);
 		unregister_reboot_notifier(&pc87413_notifier);
 		return ret;
@@ -574,7 +575,8 @@ static void __exit pc87413_exit(void)
 module_init(pc87413_init);
 module_exit(pc87413_exit);
 
-MODULE_AUTHOR("Sven Anders <anders@anduras.de>, Marcus Junker <junker@anduras.de>,");
+MODULE_AUTHOR("Sven Anders <anders@anduras.de>, "
+		"Marcus Junker <junker@anduras.de>,");
 MODULE_DESCRIPTION("PC87413 WDT driver");
 MODULE_LICENSE("GPL");
 

drivers/watchdog/pcwd.c

@@ -24,25 +24,25 @@
  *		version reporting.  Added read routine for temperature.
  *		Removed some extra defines, added an autodetect Revision
  *		routine.
- * 961006       Revised some documentation, fixed some cosmetic bugs.  Made
- *              drivers to panic the system if it's overheating at bootup.
+ * 961006	Revised some documentation, fixed some cosmetic bugs.  Made
+ *		drivers to panic the system if it's overheating at bootup.
  * 961118	Changed some verbiage on some of the output, tidied up
  *		code bits, and added compatibility to 2.1.x.
- * 970912       Enabled board on open and disable on close.
+ * 970912	Enabled board on open and disable on close.
  * 971107	Took account of recent VFS changes (broke read).
- * 971210       Disable board on initialisation in case board already ticking.
- * 971222       Changed open/close for temperature handling
- *              Michael Meskes <meskes@debian.org>.
- * 980112       Used minor numbers from include/linux/miscdevice.h
- * 990403       Clear reset status after reading control status register in
- *              pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
+ * 971210	Disable board on initialisation in case board already ticking.
+ * 971222	Changed open/close for temperature handling
+ *		Michael Meskes <meskes@debian.org>.
+ * 980112	Used minor numbers from include/linux/miscdevice.h
+ * 990403	Clear reset status after reading control status register in
+ *		pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
  * 990605	Made changes to code to support Firmware 1.22a, added
  *		fairly useless proc entry.
  * 990610	removed said useless proc code for the merge <alan>
  * 000403	Removed last traces of proc code. <davej>
  * 011214	Added nowayout module option to override
  *		CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
- *              Added timeout module option to override default
+ *		Added timeout module option to override default
  */
 
 /*
@@ -76,8 +76,7 @@
 #define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
 #define WATCHDOG_NAME "pcwd"
 #define PFX WATCHDOG_NAME ": "
-#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n"
-#define WD_VER WATCHDOG_VERSION " (" WATCHDOG_DATE ")"
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n"
 
 /*
  * It should be noted that PCWD_REVISION_B was removed because A and B
@@ -200,7 +199,9 @@ MODULE_PARM_DESC(debug,
 #define WATCHDOG_HEARTBEAT 0
 static int heartbeat = WATCHDOG_HEARTBEAT;
 module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+	"(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
@@ -239,7 +240,8 @@ static int send_isa_command(int cmd)
 	}
 
 	if (debug >= DEBUG)
-		printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
+		printk(KERN_DEBUG PFX "received following data for "
+			"cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
 			cmd, port0, last_port0);
 
 	return port0;
@@ -339,10 +341,12 @@ static void pcwd_show_card_info(void)
 							pcwd_private.io_addr);
 	else if (pcwd_private.revision == PCWD_REVISION_C) {
 		pcwd_get_firmware();
-		printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
+		printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port "
+			"0x%04x (Firmware version: %s)\n",
 			pcwd_private.io_addr, pcwd_private.fw_ver_str);
 		option_switches = pcwd_get_option_switches();
-		printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+		printk(KERN_INFO PFX "Option switches (0x%02x): "
+			"Temperature Reset Enable=%s, Power On Delay=%s\n",
 			option_switches,
 			((option_switches & 0x10) ? "ON" : "OFF"),
 			((option_switches & 0x08) ? "ON" : "OFF"));
@@ -358,7 +362,8 @@ static void pcwd_show_card_info(void)
 		printk(KERN_INFO PFX "Temperature Option Detected\n");
 
 	if (pcwd_private.boot_status & WDIOF_CARDRESET)
-		printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
+		printk(KERN_INFO PFX
+			"Previous reboot was caused by the card\n");
 
 	if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
 		printk(KERN_EMERG PFX
@@ -871,7 +876,7 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id)
 	cards_found++;
 	if (cards_found == 1)
 		printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n",
-								WD_VER);
+							WATCHDOG_VERSION);
 
 	if (cards_found > 1) {
 		printk(KERN_ERR PFX "This driver only supports 1 device\n");
@@ -1026,7 +1031,8 @@ static void __exit pcwd_cleanup_module(void)
 module_init(pcwd_init_module);
 module_exit(pcwd_cleanup_module);
 
-MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, Wim Van Sebroeck <wim@iguana.be>");
+MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, "
+		"Wim Van Sebroeck <wim@iguana.be>");
 MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
 MODULE_VERSION(WATCHDOG_VERSION);
 MODULE_LICENSE("GPL");

drivers/watchdog/pnx4008_wdt.c

@@ -54,22 +54,22 @@
 
 /* WDTIM_CTRL bit definitions */
 #define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
+#define RESET_COUNT    (1 << 1)
+#define DEBUG_EN       (1 << 2)
 
 /* WDTIM_MCTRL bit definitions */
 #define MR0_INT        1
 #undef  RESET_COUNT0
-#define RESET_COUNT0   (1<<2)
-#define STOP_COUNT0    (1<<2)
-#define M_RES1         (1<<3)
-#define M_RES2         (1<<4)
-#define RESFRC1        (1<<5)
-#define RESFRC2        (1<<6)
+#define RESET_COUNT0   (1 << 2)
+#define STOP_COUNT0    (1 << 2)
+#define M_RES1         (1 << 3)
+#define M_RES2         (1 << 4)
+#define RESFRC1        (1 << 5)
+#define RESFRC2        (1 << 6)
 
 /* WDTIM_EMR bit definitions */
 #define EXT_MATCH0      1
-#define MATCH_OUTPUT_HIGH (2<<4)	/*a MATCH_CTRL setting */
+#define MATCH_OUTPUT_HIGH (2 << 4)	/*a MATCH_CTRL setting */
 
 /* WDTIM_RES bit definitions */
 #define WDOG_RESET      1	/* read only */

drivers/watchdog/riowd.c

@@ -146,7 +146,8 @@ static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	return 0;
 }
 
-static ssize_t riowd_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+static ssize_t riowd_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
 {
 	struct riowd *p = riowd_device;
 

drivers/watchdog/sa1100_wdt.c

 /*
  *	Watchdog driver for the SA11x0/PXA2xx
  *
- *      (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
- *          Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *	(c) Copyright 2000 Oleg Drokin <green@crimea.edu>
+ *	    Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -15,7 +15,7 @@
  *
  *	(c) Copyright 2000           Oleg Drokin <green@crimea.edu>
  *
- *      27/11/2000 Initial release
+ *	27/11/2000 Initial release
  */
 #include <linux/module.h>
 #include <linux/moduleparam.h>

drivers/watchdog/sbc60xxwdt.c

 /*
  *	60xx Single Board Computer Watchdog Timer driver for Linux 2.2.x
  *
- *      Based on acquirewdt.c by Alan Cox.
+ *	Based on acquirewdt.c by Alan Cox.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License

drivers/watchdog/sbc8360.c

@@ -4,12 +4,12 @@
  *	(c) Copyright 2005 Webcon, Inc.
  *
  *	Based on ib700wdt.c, which is based on advantechwdt.c which is based
- *      on acquirewdt.c which is based on wdt.c.
+ *	on acquirewdt.c which is based on wdt.c.
  *
  *	(c) Copyright 2001 Charles Howes <chowes@vsol.net>
  *
- *      Based on advantechwdt.c which is based on acquirewdt.c which
- *       is based on wdt.c.
+ *	Based on advantechwdt.c which is based on acquirewdt.c which
+ *	is based on wdt.c.
  *
  *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
  *
@@ -30,9 +30,9 @@
  *
  *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
- *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- *           Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- *           Added timeout module option to override default
+ *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *	     Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *	     Added timeout module option to override default
  *
  */
 

drivers/watchdog/sbc_epx_c3.c

@@ -35,7 +35,8 @@ static int epx_c3_alive;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 #define EPXC3_WATCHDOG_CTL_REG 0x1ee /* write 1 to enable, 0 to disable */
 #define EPXC3_WATCHDOG_PET_REG 0x1ef /* write anything to pet once enabled */

drivers/watchdog/sc1200wdt.c

@@ -71,7 +71,7 @@
 #define UART2_IRQ	0x04	/* Serial1 */
 /* 5 -7 are reserved */
 
-static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER;
+static char banner[] __initdata = PFX SC1200_MODULE_VER;
 static int timeout = 1;
 static int io = -1;
 static int io_len = 2;		/* for non plug and play */
@@ -392,7 +392,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;
 
-	printk("%s\n", banner);
+	printk(KERN_INFO "%s\n", banner);
 
 #if defined CONFIG_PNP
 	if (isapnp) {
@@ -477,6 +477,7 @@ module_init(sc1200wdt_init);
 module_exit(sc1200wdt_exit);
 
 MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION("Driver for National Semiconductor PC87307/PC97307 watchdog component");
+MODULE_DESCRIPTION(
+	"Driver for National Semiconductor PC87307/PC97307 watchdog component");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

drivers/watchdog/sc520_wdt.c

 /*
  *	AMD Elan SC520 processor Watchdog Timer driver
  *
- *      Based on acquirewdt.c by Alan Cox,
- *           and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net>
+ *	Based on acquirewdt.c by Alan Cox,
+ *	     and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net>
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -11,7 +11,7 @@
  *
  *	The authors do NOT admit liability nor provide warranty for
  *	any of this software. This material is provided "AS-IS" in
- *      the hope that it may be useful for others.
+ *	the hope that it may be useful for others.
  *
  *	(c) Copyright 2001    Scott Jennings <linuxdrivers@oro.net>
  *           9/27 - 2001      [Initial release]
@@ -438,6 +438,7 @@ module_init(sc520_wdt_init);
 module_exit(sc520_wdt_unload);
 
 MODULE_AUTHOR("Scott and Bill Jennings");
-MODULE_DESCRIPTION("Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor");
+MODULE_DESCRIPTION(
+	"Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

drivers/watchdog/smsc37b787_wdt.c

@@ -2,7 +2,7 @@
  *	SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
  *
  *	Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
- *       and some other existing drivers
+ *	and some other existing drivers
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -11,7 +11,7 @@
  *
  *	The authors do NOT admit liability nor provide warranty for
  *	any of this software. This material is provided "AS-IS" in
- *      the hope that it may be useful for others.
+ *	the hope that it may be useful for others.
  *
  *	(C) Copyright 2003-2006  Sven Anders <anders@anduras.de>
  *
@@ -22,19 +22,19 @@
  *
  *  Theory of operation:
  *
- *      A Watchdog Timer (WDT) is a hardware circuit that can
- *      reset the computer system in case of a software fault.
- *      You probably knew that already.
+ *	A Watchdog Timer (WDT) is a hardware circuit that can
+ *	reset the computer system in case of a software fault.
+ *	You probably knew that already.
  *
- *      Usually a userspace daemon will notify the kernel WDT driver
- *      via the /dev/watchdog special device file that userspace is
- *      still alive, at regular intervals.  When such a notification
- *      occurs, the driver will usually tell the hardware watchdog
- *      that everything is in order, and that the watchdog should wait
- *      for yet another little while to reset the system.
- *      If userspace fails (RAM error, kernel bug, whatever), the
- *      notifications cease to occur, and the hardware watchdog will
- *      reset the system (causing a reboot) after the timeout occurs.
+ *	Usually a userspace daemon will notify the kernel WDT driver
+ *	via the /dev/watchdog special device file that userspace is
+ *	still alive, at regular intervals.  When such a notification
+ *	occurs, the driver will usually tell the hardware watchdog
+ *	that everything is in order, and that the watchdog should wait
+ *	for yet another little while to reset the system.
+ *	If userspace fails (RAM error, kernel bug, whatever), the
+ *	notifications cease to occur, and the hardware watchdog will
+ *	reset the system (causing a reboot) after the timeout occurs.
  *
  * Create device with:
  *  mknod /dev/watchdog c 10 130
@@ -485,7 +485,7 @@ static long wb_smsc_wdt_ioctl(struct file *file,
 	case WDIOC_GETTIMEOUT:
 		new_timeout = timeout;
 		if (unit == UNIT_MINUTE)
-			  new_timeout *= 60;
+			new_timeout *= 60;
 		return put_user(new_timeout, uarg.i);
 	default:
 		return -ENOTTY;

drivers/watchdog/softdog.c

 /*
  *	SoftDog	0.07:	A Software Watchdog Device
  *
- *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, All Rights Reserved.
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *							All Rights Reserved.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -32,7 +33,7 @@
  *	Added WDIOC_GETTIMEOUT and WDIOC_SETTIMOUT.
  *
  *  20020530 Joel Becker <joel.becker@oracle.com>
- *  	Added Matt Domsch's nowayout module option.
+ *	Added Matt Domsch's nowayout module option.
  */
 
 #include <linux/module.h>

drivers/watchdog/w83697hf_wdt.c

@@ -462,6 +462,7 @@ module_init(wdt_init);
 module_exit(wdt_exit);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>");
+MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, "
+		"Samuel Tardieu <sam@rfc1149.net>");
 MODULE_DESCRIPTION("w83697hf/hg WDT driver");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

drivers/watchdog/w83697ug_wdt.c

@@ -2,7 +2,7 @@
  *	w83697ug/uf WDT driver
  *
  *	(c) Copyright 2008 Flemming Fransen <ff@nrvissing.net>
- *              reused original code to supoprt w83697ug/uf.
+ *		reused original code to support w83697ug/uf.
  *
  *	Based on w83627hf_wdt.c which is based on advantechwdt.c
  *	which is based on wdt.c.

drivers/watchdog/w83977f_wdt.c

@@ -426,7 +426,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			return -EFAULT;
 
 		if (wdt_set_timeout(new_timeout))
-		    return -EINVAL;
+			return -EINVAL;
 
 		wdt_keepalive();
 		/* Fall */

drivers/watchdog/wd501p.h

@@ -11,9 +11,9 @@
  *
  *	http://www.cymru.net
  *
- *	This driver is provided under the GNU General Public License, incorporated
- *	herein by reference. The driver is provided without warranty or
- *	support.
+ *	This driver is provided under the GNU General Public License,
+ *	incorporated herein by reference. The driver is provided without
+ *	warranty or support.
  *
  *	Release 0.04.
  *
@@ -39,13 +39,13 @@
 /* programmable outputs: */
 #define WDT_PROGOUT		(io+15)	/* wr=enable, rd=disable */
 
-								/* FAN 501 500 */
-#define WDC_SR_WCCR		1	/* Active low */	/*  X   X   X  */
-#define WDC_SR_TGOOD		2				/*  X   X   -  */
-#define WDC_SR_ISOI0		4				/*  X   X   X  */
-#define WDC_SR_ISII1		8				/*  X   X   X  */
-#define WDC_SR_FANGOOD		16				/*  X   -   -  */
-#define WDC_SR_PSUOVER		32	/* Active low */	/*  X   X   -  */
-#define WDC_SR_PSUUNDR		64	/* Active low */	/*  X   X   -  */
-#define WDC_SR_IRQ		128	/* Active low */	/*  X   X   X  */
+							 /* FAN 501 500 */
+#define WDC_SR_WCCR		1	/* Active low */ /*  X   X   X  */
+#define WDC_SR_TGOOD		2			 /*  X   X   -  */
+#define WDC_SR_ISOI0		4			 /*  X   X   X  */
+#define WDC_SR_ISII1		8			 /*  X   X   X  */
+#define WDC_SR_FANGOOD		16			 /*  X   -   -  */
+#define WDC_SR_PSUOVER		32	/* Active low */ /*  X   X   -  */
+#define WDC_SR_PSUUNDR		64	/* Active low */ /*  X   X   -  */
+#define WDC_SR_IRQ		128	/* Active low */ /*  X   X   X  */
 

drivers/watchdog/wdt977.c

@@ -401,7 +401,7 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd,
 			return -EFAULT;
 
 		if (wdt977_set_timeout(new_timeout))
-		    return -EINVAL;
+			return -EINVAL;
 
 		wdt977_keepalive();
 		/* Fall */