Commit 1489bbd1 authored by Dirk van der Merwe's avatar Dirk van der Merwe Committed by David S. Miller

nfp: use full 40 bits of the NSP buffer address

The NSP default buffer is a piece of NFP memory where additional
command data can be placed.  Its format has been copied from
host buffer, but the PCIe selection bits do not make sense in
this case.  If those get masked out from a NFP address - writes
to random place in the chip memory may be issued and crash the
device.

Even in the general NSP buffer case, it doesn't make sense to have the
PCIe selection bits there anymore. These are unused at the moment, and
when it becomes necessary, the PCIe selection bits should rather be
moved to another register to utilise more bits for the buffer address.

This has never been an issue because the buffer used to be
allocated in memory with less-than-38-bit-long address but that
is about to change.

Fixes: 1a64821c ("nfp: add support for service processor access")
Signed-off-by: default avatarDirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 92571a1a
......@@ -71,10 +71,11 @@
/* CPP address to retrieve the data from */
#define NSP_BUFFER 0x10
#define NSP_BUFFER_CPP GENMASK_ULL(63, 40)
#define NSP_BUFFER_PCIE GENMASK_ULL(39, 38)
#define NSP_BUFFER_ADDRESS GENMASK_ULL(37, 0)
#define NSP_BUFFER_ADDRESS GENMASK_ULL(39, 0)
#define NSP_DFLT_BUFFER 0x18
#define NSP_DFLT_BUFFER_CPP GENMASK_ULL(63, 40)
#define NSP_DFLT_BUFFER_ADDRESS GENMASK_ULL(39, 0)
#define NSP_DFLT_BUFFER_CONFIG 0x20
#define NSP_DFLT_BUFFER_SIZE_MB GENMASK_ULL(7, 0)
......@@ -427,8 +428,8 @@ __nfp_nsp_command_buf(struct nfp_nsp *nsp, u16 code, u32 option,
if (err < 0)
return err;
cpp_id = FIELD_GET(NSP_BUFFER_CPP, reg) << 8;
cpp_buf = FIELD_GET(NSP_BUFFER_ADDRESS, reg);
cpp_id = FIELD_GET(NSP_DFLT_BUFFER_CPP, reg) << 8;
cpp_buf = FIELD_GET(NSP_DFLT_BUFFER_ADDRESS, reg);
if (in_buf && in_size) {
err = nfp_cpp_write(cpp, cpp_id, cpp_buf, in_buf, in_size);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment