Skip to content

L
linux
Commit 15245c93 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: sm8450-nagara: Add gpio line names for TLMM 

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX223&224 DTSIs to better document the hardware.

Diff between 223 and 224:
< 	gpio-line-names = "NC", /* GPIO_0 */
< 			  "NC",
< 			  "NC",
< 			  "NC",
> 	gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
> 			  "TELE_SPI_MOSI",
> 			  "TELE_SPI_CLK",
> 			  "TELE_SPI_CS_N",
< 			  "PM8010_2_RESET_N",
> 			  "NC",
< 			  "NC",
> 			  "UWIDEC_PWR_EN",
< 			  "TOF_RST_N",
> 			  "NC"
< 			  "QLINK1_REQ",
< 			  "QLINK1_EN", /* GPIO_160 */
< 			  "QLINK1_WMSS_RESET_N",
> 			  "NC",
> 			  "NC", /* GPIO_160 */
> 			  "NC",
The tele lens setup is different on 1 IV and 5 IV and power wiring
is different for some lenses, so it makes sense. As for QLINK, no
idea.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221117141613.19942-1-konrad.dybcio@linaro.org
parent d132d9e7
Hide whitespace changes
Inline Side-by-side
Showing with 426 additions and 0 deletions
arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
View file @ 15245c93
......@@ -12,3 +12,216 @@ / {
model = "Sony Xperia 1 IV";
compatible = "sony,pdx223", "qcom,sm8450";
};
&tlmm {
gpio-line-names = "NC", /* GPIO_0 */
"NC",
"NC",
"NC",
"WLC_I2C_SDA",
"WLC_I2C_SCL",
"NC",
"PM8010_1_RESET_N",
"WLC_INT_N",
"NC",
"NC", /* GPIO_10 */
"PM8010_2_RESET_N",
"DISP_ERR_FG",
"HALL_INT_N",
"ALS_PROX_INT_N",
"IMU1_INT",
"TS_I2C_SDA",
"TS_I2C_SCL",
"DISP_RESET_N",
"DISP_VDDR_EN",
"TS_RESET_N", /* GPIO_20 */
"TS_INT_N",
"NC",
"TELEC_PWR_EN",
"CAM1_RESET_N",
"LEO_CAM0_RESET_N",
"DEBUG_UART_TX",
"DEBUG_UART_RX",
"FP_SPI_MISO",
"FP_SPI_MOSI",
"FP_SPI_CLK", /* GPIO_30 */
"FP_SPI_CS_N",
"NFC_I2C_SDA",
"NFC_I2C_SCL",
"NFC_EN",
"NFC_CLK_REQ",
"NFC_ESE_SPI_MISO",
"NFC_ESE_SPI_MOSI",
"NFC_ESE_SPI_CLK",
"NFC_ESE_SPI_CS",
"FP_INT_N", /* GPIO_40 */
"NC",
"FP_RESET_N",
"WCD_RST_N",
"NC",
"NFC_DWL_REQ",
"NFC_IRQ",
"FORCE_USB_BOOT",
"APPS_I2C_1_SDA",
"APPS_I2C_1_SCL",
"SBU_SW_OE", /* GPIO_50 */
"SBU_SW_SEL",
"SPK_AMP_I2C_SDA",
"SPK_AMP_I2C_SCL",
"NC",
"NC",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"GNSS_ELNA_EN0",
"NC",
"NC", /* GPIO_60 */
"NC",
"NC",
"NC",
"NC",
"NC",
"RGBC_IR_INT",
"NC",
"NC",
"NC",
"NC", /* GPIO_70 */
"NC",
"HAP_I2C_SDA",
"HAP_I2C_SCL",
"HAP_RST_N",
"HAP_INT_N",
"HST_BT_UART_CTS",
"HST_BT_UART_RFR",
"HST_BT_UART_TX",
"HST_BT_UART_RX",
"HST_WLAN_EN", /* GPIO_80 */
"HST_BT_EN",
"HST_SW_CTRL",
"NC",
"NC",
"NC",
"DISP_VSYNC",
"NC",
"NC",
"HW_ID_0",
"HW_ID_1", /* GPIO_90 */
"USB_CC_DIR",
"TRAY_DET",
"SW_SERVICE",
"PCIE0_RESET_N",
"PCIE0_CLK_REQ_N",
"PCIE0_WAKE_N",
"OIS_ENABLE_WIDE",
"DEBUG_GPIO0",
"NC",
"CAM_MCLK0", /* GPIO_100 */
"CAM_MCLK1",
"CAM_MCLK2",
"CAM_MCLK3",
"NC",
"NC",
"TOF_RST_N",
"CAM_SOF",
"NC",
"AFEXPTMG_TELE",
"CCI_I2C0_SDA", /* GPIO_110 */
"CCI_I2C0_SCL",
"CCI_I2C1_SDA",
"CCI_I2C1_SCL",
"CCI_I2C2_SDA",
"CCI_I2C2_SCL",
"NC",
"CAM2_RESET_N",
"NC",
"EXT_VD0_XVS",
"CAM3_RESET_N", /* GPIO_120 */
"NC",
"NC",
"NC",
"NC",
"RF_ID_EXTENSION_2",
"HAP_I2S_CLK",
"HAP_I2S_DOUT",
"HAP_TRG1",
"HAP_I2S_SYNC",
"UIM1_DATA", /* GPIO_130 */
"UIM1_CLK",
"UIM1_RESET",
"TRAY_DET",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RESET",
"UIM2_PRESENT",
"SM_RFFE0_CLK",
"SM_RFFE0_DATA",
"SM_RFFE1_CLK", /* GPIO_140 */
"SM_RFFE1_DATA",
"SM_MSS_GRFC4",
"HST_AS_EN",
"LAA_RX_EN",
"NC",
"SM_RFFE4_CLK",
"SM_RFFE4_DATA",
"WLAN_COEX_UART1_RX",
"WLAN_COEX_UART1_TX",
"RF_LCD_ID_EN", /* GPIO_150 */
"RF_ID_EXTENSION",
"SM_MSS_GRFC12",
"NFC_COLD_RST",
"NC",
"NC",
"SDR1_QLINK0_REQ",
"SDR1_QLINK0_EN",
"SDR1_QLINK0_WMSS_RESET_N",
"QLINK1_REQ",
"QLINK1_EN", /* GPIO_160 */
"QLINK1_WMSS_RESET_N",
"SDR2_QLINK2_REQ",
"SDR2_QLINK2_EN",
"SDR2_QLINK2_WMSS_RESET_N",
"WCD_SWR_TX_CLK",
"WCD_SWR_TX_DATA0",
"WCD_SWR_TX_DATA1",
"WCD_SWR_RX_CLK",
"WCD_SWR_RX_DATA0",
"WCD_SWR_RX_DATA1", /* GPIO_170 */
"SM_DMIC1_CLK",
"SM_DMIC1_DATA",
"SM_DMIC2_CLK",
"SM_DMIC2_DATA",
"SPK_AMP_I2S_CLK",
"SPK_AMP_I2S_WS",
"NC",
"NC",
"WCD_SWR_TX_DATA2",
"SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
"SPK_AMP_I2S_ASP_DOUT",
"SPK_AMP_INT_N",
"SPK_AMP_RESET_N",
"HST_BT_WLAN_SLIMBUS_CLK",
"HST_BT_WLAN_SLIMBUS_DAT0",
"NC",
"NC",
"NC",
"NC",
"MAG_I2C_SDA", /* GPIO_190 */
"MAG_I2C_SCL",
"IMU_SPI_MISO",
"IMU_SPI_MOSI",
"IMU_SPI_CLK",
"IMU_SPI_CS_N",
"SENSOR_I2C_SDA",
"SENSOR_I2C_SCL",
"OIS_TELE_I2C_SDA",
"OIS_TELE_I2C_SCL",
"NC", /* GPIO_200 */
"OIS_ENABLE_TELE",
"HST_BLE_UART_TX",
"HST_BLE_UART_RX",
"HSTP_CLK_CFG_SEL",
"NC",
"APPS_I2C_0_SDA",
"APPS_I2C_0_SCL",
"CCI_I2C3_SDA",
"CCI_I2C3_SCL";
};
arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
View file @ 15245c93
......@@ -19,3 +19,216 @@ imx563_vdig_vreg: imx563-vdig-regulator {
enable-active-high;
};
};
&tlmm {
gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
"TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
"TELE_SPI_CLK",
"TELE_SPI_CS_N",
"WLC_I2C_SDA",
"WLC_I2C_SCL",
"NC",
"PM8010_1_RESET_N",
"WLC_INT_N",
"NC",
"NC", /* GPIO_10 */
"NC",
"DISP_ERR_FG",
"HALL_INT_N",
"ALS_PROX_INT_N",
"IMU1_INT",
"TS_I2C_SDA",
"TS_I2C_SCL",
"DISP_RESET_N",
"DISP_VDDR_EN",
"TS_RESET_N", /* GPIO_20 */
"TS_INT_N",
"UWIDEC_PWR_EN",
"TELEC_PWR_EN",
"CAM1_RESET_N",
"LEO_CAM0_RESET_N",
"DEBUG_UART_TX",
"DEBUG_UART_RX",
"FP_SPI_MISO",
"FP_SPI_MOSI",
"FP_SPI_CLK", /* GPIO_30 */
"FP_SPI_CS_N",
"NFC_I2C_SDA",
"NFC_I2C_SCL",
"NFC_EN",
"NFC_CLK_REQ",
"NFC_ESE_SPI_MISO",
"NFC_ESE_SPI_MOSI",
"NFC_ESE_SPI_CLK",
"NFC_ESE_SPI_CS",
"FP_INT_N", /* GPIO_40 */
"NC",
"FP_RESET_N",
"WCD_RST_N",
"NC",
"NFC_DWL_REQ",
"NFC_IRQ",
"FORCE_USB_BOOT",
"APPS_I2C_1_SDA",
"APPS_I2C_1_SCL",
"SBU_SW_OE", /* GPIO_50 */
"SBU_SW_SEL",
"SPK_AMP_I2C_SDA",
"SPK_AMP_I2C_SCL",
"NC",
"NC",
"CAMSENSOR_I2C_SDA",
"CAMSENSOR_I2C_SCL",
"GNSS_ELNA_EN0",
"NC",
"NC", /* GPIO_60 */
"NC",
"NC",
"NC",
"NC",
"NC",
"RGBC_IR_INT",
"NC",
"NC",
"NC",
"NC", /* GPIO_70 */
"NC",
"HAP_I2C_SDA",
"HAP_I2C_SCL",
"HAP_RST_N",
"HAP_INT_N",
"HST_BT_UART_CTS",
"HST_BT_UART_RFR",
"HST_BT_UART_TX",
"HST_BT_UART_RX",
"HST_WLAN_EN", /* GPIO_80 */
"HST_BT_EN",
"HST_SW_CTRL",
"NC",
"NC",
"NC",
"DISP_VSYNC",
"NC",
"NC",
"HW_ID_0",
"HW_ID_1", /* GPIO_90 */
"USB_CC_DIR",
"TRAY_DET",
"SW_SERVICE",
"PCIE0_RESET_N",
"PCIE0_CLK_REQ_N",
"PCIE0_WAKE_N",
"OIS_ENABLE_WIDE",
"DEBUG_GPIO0",
"NC",
"CAM_MCLK0", /* GPIO_100 */
"CAM_MCLK1",
"CAM_MCLK2",
"CAM_MCLK3",
"NC",
"NC",
"NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */
"CAM_SOF",
"NC",
"AFEXPTMG_TELE",
"CCI_I2C0_SDA", /* GPIO_110 */
"CCI_I2C0_SCL",
"CCI_I2C1_SDA",
"CCI_I2C1_SCL",
"CCI_I2C2_SDA",
"CCI_I2C2_SCL",
"NC",
"CAM2_RESET_N",
"NC",
"EXT_VD0_XVS",
"CAM3_RESET_N", /* GPIO_120 */
"NC",
"NC",
"NC",
"NC",
"RF_ID_EXTENSION_2",
"HAP_I2S_CLK",
"HAP_I2S_DOUT",
"HAP_TRG1",
"HAP_I2S_SYNC",
"UIM1_DATA", /* GPIO_130 */
"UIM1_CLK",
"UIM1_RESET",
"TRAY_DET",
"UIM2_DATA",
"UIM2_CLK",
"UIM2_RESET",
"UIM2_PRESENT",
"SM_RFFE0_CLK",
"SM_RFFE0_DATA",
"SM_RFFE1_CLK", /* GPIO_140 */
"SM_RFFE1_DATA",
"SM_MSS_GRFC4",
"HST_AS_EN",
"LAA_RX_EN",
"NC",
"SM_RFFE4_CLK",
"SM_RFFE4_DATA",
"WLAN_COEX_UART1_RX",
"WLAN_COEX_UART1_TX",
"RF_LCD_ID_EN", /* GPIO_150 */
"RF_ID_EXTENSION",
"SM_MSS_GRFC12",
"NFC_COLD_RST",
"NC",
"NC",
"SDR1_QLINK0_REQ",
"SDR1_QLINK0_EN",
"SDR1_QLINK0_WMSS_RESET_N",
"NC",
"NC", /* GPIO_160 */
"NC",
"SDR2_QLINK2_REQ",
"SDR2_QLINK2_EN",
"SDR2_QLINK2_WMSS_RESET_N",
"WCD_SWR_TX_CLK",
"WCD_SWR_TX_DATA0",
"WCD_SWR_TX_DATA1",
"WCD_SWR_RX_CLK",
"WCD_SWR_RX_DATA0",
"WCD_SWR_RX_DATA1", /* GPIO_170 */
"SM_DMIC1_CLK",
"SM_DMIC1_DATA",
"SM_DMIC2_CLK",
"SM_DMIC2_DATA",
"SPK_AMP_I2S_CLK",
"SPK_AMP_I2S_WS",
"NC",
"NC",
"WCD_SWR_TX_DATA2",
"SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
"SPK_AMP_I2S_ASP_DOUT",
"SPK_AMP_INT_N",
"SPK_AMP_RESET_N",
"HST_BT_WLAN_SLIMBUS_CLK",
"HST_BT_WLAN_SLIMBUS_DAT0",
"NC",
"NC",
"NC",
"NC",
"MAG_I2C_SDA", /* GPIO_190 */
"MAG_I2C_SCL",
"IMU_SPI_MISO",
"IMU_SPI_MOSI",
"IMU_SPI_CLK",
"IMU_SPI_CS_N",
"SENSOR_I2C_SDA",
"SENSOR_I2C_SCL",
"OIS_TELE_I2C_SDA",
"OIS_TELE_I2C_SCL",
"NC", /* GPIO_200 */
"OIS_ENABLE_TELE",
"HST_BLE_UART_TX",
"HST_BLE_UART_RX",
"HSTP_CLK_CFG_SEL",
"NC",
"APPS_I2C_0_SDA",
"APPS_I2C_0_SCL",
"CCI_I2C3_SDA",
"CCI_I2C3_SCL";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7