Commit 15302800 authored by Richard Zhao's avatar Richard Zhao Committed by Greg Kroah-Hartman

usb: chipidea: add imx platform driver

This patch supports only the host-mode functionality so far.
Signed-off-by: default avatarRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Tested-by: default avatarSubodh Nijsure <snijsure@grid-net.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b3d99681
* Freescale i.MX ci13xxx usb controllers
Required properties:
- compatible: Should be "fsl,imx27-usb"
- reg: Should contain registers location and length
- interrupts: Should contain controller interrupt
Optional properties:
- fsl,usbphy: phandler of usb phy that connects to the only one port
- vbus-supply: regulator for vbus
Examples:
usb@02184000 { /* USB OTG */
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
fsl,usbphy = <&usbphy1>;
};
......@@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),)
obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_pci.o
endif
ifneq ($(CONFIG_OF_DEVICE),)
obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o
endif
/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Marek Vasut <marex@denx.de>
* on behalf of DENX Software Engineering GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include "ci.h"
#define pdev_to_phy(pdev) \
((struct usb_phy *)platform_get_drvdata(pdev))
struct ci13xxx_imx_data {
struct device_node *phy_np;
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
struct regulator *reg_vbus;
};
static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = {
.name = "ci13xxx_imx",
.flags = CI13XXX_REQUIRE_TRANSCEIVER |
CI13XXX_PULLUP_ON_VBUS |
CI13XXX_DISABLE_STREAMING,
.capoffset = DEF_CAPOFFSET,
};
static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
{
struct ci13xxx_imx_data *data;
struct platform_device *plat_ci, *phy_pdev;
struct device_node *phy_np;
struct resource *res;
struct regulator *reg_vbus;
int ret;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Can't get device resources!\n");
return -ENOENT;
}
data->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(data->clk)) {
dev_err(&pdev->dev,
"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
return PTR_ERR(data->clk);
}
ret = clk_prepare_enable(data->clk);
if (ret) {
dev_err(&pdev->dev,
"Failed to prepare or enable clock, err=%d\n", ret);
return ret;
}
phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
if (phy_np) {
data->phy_np = phy_np;
phy_pdev = of_find_device_by_node(phy_np);
if (phy_pdev) {
struct usb_phy *phy;
phy = pdev_to_phy(phy_pdev);
if (phy &&
try_module_get(phy_pdev->dev.driver->owner)) {
usb_phy_init(phy);
data->phy = phy;
}
}
}
/* we only support host now, so enable vbus here */
reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
if (!IS_ERR(reg_vbus)) {
ret = regulator_enable(reg_vbus);
if (ret) {
dev_err(&pdev->dev,
"Failed to enable vbus regulator, err=%d\n",
ret);
goto put_np;
}
data->reg_vbus = reg_vbus;
} else {
reg_vbus = NULL;
}
ci13xxx_imx_platdata.phy = data->phy;
if (!pdev->dev.dma_mask) {
pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask) {
ret = -ENOMEM;
dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
goto err;
}
*pdev->dev.dma_mask = DMA_BIT_MASK(32);
dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
}
plat_ci = ci13xxx_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci13xxx_imx_platdata);
if (IS_ERR(plat_ci)) {
ret = PTR_ERR(plat_ci);
dev_err(&pdev->dev,
"Can't register ci_hdrc platform device, err=%d\n",
ret);
goto err;
}
data->ci_pdev = plat_ci;
platform_set_drvdata(pdev, data);
pm_runtime_no_callbacks(&pdev->dev);
pm_runtime_enable(&pdev->dev);
return 0;
err:
if (reg_vbus)
regulator_disable(reg_vbus);
put_np:
if (phy_np)
of_node_put(phy_np);
clk_disable_unprepare(data->clk);
return ret;
}
static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
{
struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
pm_runtime_disable(&pdev->dev);
ci13xxx_remove_device(data->ci_pdev);
if (data->reg_vbus)
regulator_disable(data->reg_vbus);
if (data->phy) {
usb_phy_shutdown(data->phy);
module_put(data->phy->dev->driver->owner);
}
of_node_put(data->phy_np);
clk_disable_unprepare(data->clk);
platform_set_drvdata(pdev, NULL);
return 0;
}
static const struct of_device_id ci13xxx_imx_dt_ids[] = {
{ .compatible = "fsl,imx27-usb", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
static struct platform_driver ci13xxx_imx_driver = {
.probe = ci13xxx_imx_probe,
.remove = __devexit_p(ci13xxx_imx_remove),
.driver = {
.name = "imx_usb",
.owner = THIS_MODULE,
.of_match_table = ci13xxx_imx_dt_ids,
},
};
module_platform_driver(ci13xxx_imx_driver);
MODULE_ALIAS("platform:imx-usb");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("CI13xxx i.MX USB binding");
MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment