Commit 15333539 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A respin of the merges in the previous pull request with one extra
  fix.

  A quiet release for the regulator API, quite a large number of small
  improvements all over but other than the addition of new drivers for
  the AS3722 and MAX14577 there is nothing of substantial non-local
  impact"

* tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits)
  regulator: pfuze100-regulator: Improve dev_info() message
  regulator: pfuze100-regulator: Fix some checkpatch complaints
  regulator: twl: Fix checkpatch issue
  regulator: core: Fix checkpatch issue
  regulator: anatop-regulator: Remove unneeded memset()
  regulator: s5m8767: Update LDO index in s5m8767-regulator.txt
  regulator: as3722: set enable time for SD0/1/6
  regulator: as3722: detect SD0 low-voltage mode
  regulator: tps62360: Fix up a pointer-integer size mismatch warning
  regulator: anatop-regulator: Remove unneeded kstrdup()
  regulator: act8865: Fix build error when !OF
  regulator: act8865: register all regulators regardless of how many are used
  regulator: wm831x-dcdc: Remove unneeded 'err' label
  regulator: anatop-regulator: Add MODULE_ALIAS()
  regulator: act8865: fix incorrect devm_kzalloc for act8865
  regulator: act8865: Remove set_suspend_[en|dis]able implementation
  regulator: act8865: Remove unneeded regulator_unregister() calls
  regulator: s2mps11: Clean up redundant code
  regulator: tps65910: Simplify setting enable_mask for regulators
  regulator: act8865: add device tree binding doc
  ...
parents bb1b6490 07b19808
......@@ -21,7 +21,7 @@ Required properties:
The valid regulator-compatible values are:
tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
vaux2, vaux33, vmmc
vaux2, vaux33, vmmc, vbb
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
ldo6, ldo7, ldo8
......@@ -38,7 +38,7 @@ Required properties:
vcc4-supply: VAUX1 and VAUX2 input.
vcc5-supply: VPLL and VDAC input.
vcc6-supply: VDIG1 and VDIG2 input.
vcc7-supply: VRTC input.
vcc7-supply: VRTC and VBB input.
vccio-supply: VIO input.
tps65911:
vcc1-supply: VDD1 input.
......
ACT8865 regulator
-------------------
Required properties:
- compatible: "active-semi,act8865"
- reg: I2C slave address
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
Example:
--------
i2c1: i2c@f0018000 {
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
status = "disabled";
regulators {
vcc_1v8_reg: DCDC_REG1 {
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcc_1v2_reg: DCDC_REG2 {
regulator-name = "VCC_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-suspend-mem-microvolt = <1150000>;
regulator-suspend-standby-microvolt = <1150000>;
regulator-always-on;
};
vcc_3v3_reg: DCDC_REG3 {
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vddana_reg: LDO_REG1 {
regulator-name = "VDDANA";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vddfuse_reg: LDO_REG2 {
regulator-name = "FUSE_2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
};
};
};
......@@ -83,7 +83,7 @@ as per the datasheet of s5m8767.
- LDOn
- valid values for n are 1 to 28
- Example: LDO0, LD01, LDO28
- Example: LDO1, LD02, LDO28
- BUCKn
- valid values for n are 1 to 9.
- Example: BUCK1, BUCK2, BUCK9
......
......@@ -3,6 +3,7 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order.
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
active-semi Active-Semi International Inc
ad Avionic Design GmbH
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
......
......@@ -245,7 +245,7 @@ static int pcf50633_probe(struct i2c_client *client,
for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
struct platform_device *pdev;
pdev = platform_device_alloc("pcf50633-regltr", i);
pdev = platform_device_alloc("pcf50633-regulator", i);
if (!pdev) {
dev_err(pcf->dev, "Cannot create regulator %d\n", i);
continue;
......
......@@ -81,36 +81,6 @@ static struct of_device_id sec_dt_match[] = {
};
#endif
int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
{
return regmap_read(sec_pmic->regmap_pmic, reg, dest);
}
EXPORT_SYMBOL_GPL(sec_reg_read);
int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
{
return regmap_bulk_read(sec_pmic->regmap_pmic, reg, buf, count);
}
EXPORT_SYMBOL_GPL(sec_bulk_read);
int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value)
{
return regmap_write(sec_pmic->regmap_pmic, reg, value);
}
EXPORT_SYMBOL_GPL(sec_reg_write);
int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf)
{
return regmap_raw_write(sec_pmic->regmap_pmic, reg, buf, count);
}
EXPORT_SYMBOL_GPL(sec_bulk_write);
int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask)
{
return regmap_update_bits(sec_pmic->regmap_pmic, reg, mask, val);
}
EXPORT_SYMBOL_GPL(sec_reg_update);
static bool s2mps11_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
......
......@@ -70,6 +70,14 @@ config REGULATOR_88PM8607
help
This driver supports 88PM8607 voltage regulator chips.
config REGULATOR_ACT8865
tristate "Active-semi act8865 voltage regulator"
depends on I2C
select REGMAP_I2C
help
This driver controls a active-semi act8865 voltage output
regulator via I2C bus.
config REGULATOR_AD5398
tristate "Analog Devices AD5398/AD5821 regulators"
depends on I2C
......@@ -249,6 +257,13 @@ config REGULATOR_LP8788
help
This driver supports LP8788 voltage regulator chip.
config REGULATOR_MAX14577
tristate "Maxim 14577 regulator"
depends on MFD_MAX14577
help
This driver controls a Maxim 14577 regulator via I2C bus.
The regulators include safeout LDO and current regulator 'CHARGER'.
config REGULATOR_MAX1586
tristate "Maxim 1586/1587 voltage regulator"
depends on I2C
......@@ -384,7 +399,7 @@ config REGULATOR_PCF50633
on PCF50633
config REGULATOR_PFUZE100
tristate "Support regulators on Freescale PFUZE100 PMIC"
tristate "Freescale PFUZE100 regulator driver"
depends on I2C
select REGMAP_I2C
help
......
......@@ -14,6 +14,7 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
......@@ -35,6 +36,7 @@ obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
......
......@@ -2998,37 +2998,6 @@ static void abx500_get_regulator_info(struct ab8500 *ab8500)
}
}
static int ab8500_regulator_init_registers(struct platform_device *pdev,
int id, int mask, int value)
{
struct ab8500_reg_init *reg_init = abx500_regulator.init;
int err;
BUG_ON(value & ~mask);
BUG_ON(mask & ~reg_init[id].mask);
/* initialize register */
err = abx500_mask_and_set_register_interruptible(
&pdev->dev,
reg_init[id].bank,
reg_init[id].addr,
mask, value);
if (err < 0) {
dev_err(&pdev->dev,
"Failed to initialize 0x%02x, 0x%02x.\n",
reg_init[id].bank,
reg_init[id].addr);
return err;
}
dev_vdbg(&pdev->dev,
" init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n",
reg_init[id].bank,
reg_init[id].addr,
mask, value);
return 0;
}
static int ab8500_regulator_register(struct platform_device *pdev,
struct regulator_init_data *init_data,
int id, struct device_node *np)
......@@ -3036,7 +3005,6 @@ static int ab8500_regulator_register(struct platform_device *pdev,
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
int err;
/* assign per-regulator data */
info = &abx500_regulator.info[id];
......@@ -3058,17 +3026,12 @@ static int ab8500_regulator_register(struct platform_device *pdev,
}
/* register regulator with framework */
info->regulator = regulator_register(&info->desc, &config);
info->regulator = devm_regulator_register(&pdev->dev, &info->desc,
&config);
if (IS_ERR(info->regulator)) {
err = PTR_ERR(info->regulator);
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
/* when we fail, un-register all earlier regulators */
while (--id >= 0) {
info = &abx500_regulator.info[id];
regulator_unregister(info->regulator);
}
return err;
return PTR_ERR(info->regulator);
}
return 0;
......@@ -3095,9 +3058,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct device_node *np = pdev->dev.of_node;
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
int i, err;
int err;
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
......@@ -3106,83 +3067,20 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
abx500_get_regulator_info(ab8500);
if (np) {
err = of_regulator_match(&pdev->dev, np,
abx500_regulator.match,
abx500_regulator.match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
err = ab8500_regulator_of_probe(pdev, np);
return err;
}
ppdata = dev_get_platdata(ab8500->dev);
if (!ppdata) {
dev_err(&pdev->dev, "null parent pdata\n");
return -EINVAL;
}
pdata = ppdata->regulator;
if (!pdata) {
dev_err(&pdev->dev, "null pdata\n");
return -EINVAL;
}
/* make sure the platform data has the correct size */
if (pdata->num_regulator != abx500_regulator.info_size) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
/* initialize debug (initial state is recorded with this call) */
err = ab8500_regulator_debug_init(pdev);
if (err)
err = of_regulator_match(&pdev->dev, np,
abx500_regulator.match,
abx500_regulator.match_size);
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
/* initialize registers */
for (i = 0; i < pdata->num_reg_init; i++) {
int id, mask, value;
id = pdata->reg_init[i].id;
mask = pdata->reg_init[i].mask;
value = pdata->reg_init[i].value;
/* check for configuration errors */
BUG_ON(id >= abx500_regulator.init_size);
err = ab8500_regulator_init_registers(pdev, id, mask, value);
if (err < 0)
return err;
}
/* register all regulators */
for (i = 0; i < abx500_regulator.info_size; i++) {
err = ab8500_regulator_register(pdev, &pdata->regulator[i],
i, NULL);
if (err < 0)
return err;
}
return 0;
return ab8500_regulator_of_probe(pdev, np);
}
static int ab8500_regulator_remove(struct platform_device *pdev)
{
int i, err;
for (i = 0; i < abx500_regulator.info_size; i++) {
struct ab8500_regulator_info *info = NULL;
info = &abx500_regulator.info[i];
dev_vdbg(rdev_get_dev(info->regulator),
"%s-remove\n", info->desc.name);
regulator_unregister(info->regulator);
}
int err;
/* remove regulator debug */
err = ab8500_regulator_debug_exit(pdev);
......
/*
* act8865-regulator.c - Voltage regulation for the active-semi ACT8865
* http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf
*
* Copyright (C) 2013 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/act8865.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
/*
* ACT8865 Global Register Map.
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
/*
* Field Definitions.
*/
#define ACT8865_ENA 0x80 /* ON - [7] */
#define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */
/*
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
struct act8865 {
struct regulator_dev *rdev[ACT8865_REG_NUM];
struct regmap *regmap;
};
static const struct regmap_config act8865_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static const struct regulator_linear_range act8865_volatge_ranges[] = {
REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
};
static struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_desc act8865_reg[] = {
{
.name = "DCDC_REG1",
.id = ACT8865_ID_DCDC1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC1_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG2",
.id = ACT8865_ID_DCDC2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC2_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG3",
.id = ACT8865_ID_DCDC3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_DCDC3_VSET1,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_DCDC3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG1",
.id = ACT8865_ID_LDO1,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO1_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO1_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG2",
.id = ACT8865_ID_LDO2,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO2_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO2_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG3",
.id = ACT8865_ID_LDO3,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO3_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO3_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
{
.name = "LDO_REG4",
.id = ACT8865_ID_LDO4,
.ops = &act8865_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = ACT8865_VOLTAGE_NUM,
.linear_ranges = act8865_volatge_ranges,
.n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges),
.vsel_reg = ACT8865_LDO4_VSET,
.vsel_mask = ACT8865_VSEL_MASK,
.enable_reg = ACT8865_LDO4_CTRL,
.enable_mask = ACT8865_ENA,
.owner = THIS_MODULE,
},
};
#ifdef CONFIG_OF
static const struct of_device_id act8865_dt_ids[] = {
{ .compatible = "active-semi,act8865" },
{ }
};
MODULE_DEVICE_TABLE(of, act8865_dt_ids);
static struct of_regulator_match act8865_matches[] = {
[ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"},
[ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"},
[ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"},
[ACT8865_ID_LDO1] = { .name = "LDO_REG1"},
[ACT8865_ID_LDO2] = { .name = "LDO_REG2"},
[ACT8865_ID_LDO3] = { .name = "LDO_REG3"},
[ACT8865_ID_LDO4] = { .name = "LDO_REG4"},
};
static int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
{
int matched, i;
struct device_node *np;
struct act8865_regulator_data *regulator;
np = of_find_node_by_name(dev->of_node, "regulators");
if (!np) {
dev_err(dev, "missing 'regulators' subnode in DT\n");
return -EINVAL;
}
matched = of_regulator_match(dev, np,
act8865_matches, ARRAY_SIZE(act8865_matches));
if (matched <= 0)
return matched;
pdata->regulators = devm_kzalloc(dev,
sizeof(struct act8865_regulator_data) *
ARRAY_SIZE(act8865_matches), GFP_KERNEL);
if (!pdata->regulators) {
dev_err(dev, "%s: failed to allocate act8865 registor\n",
__func__);
return -ENOMEM;
}
pdata->num_regulators = matched;
regulator = pdata->regulators;
for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) {
regulator->id = i;
regulator->name = act8865_matches[i].name;
regulator->platform_data = act8865_matches[i].init_data;
of_node[i] = act8865_matches[i].of_node;
regulator++;
}
return 0;
}
#else
static inline int act8865_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct act8865_platform_data *pdata)
{
return 0;
}
#endif
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct regulator_dev **rdev;
struct device *dev = &client->dev;
struct act8865_platform_data *pdata = dev_get_platdata(dev);
struct regulator_config config = { };
struct act8865 *act8865;
struct device_node *of_node[ACT8865_REG_NUM];
int i, id;
int ret = -EINVAL;
int error;
if (dev->of_node && !pdata) {
const struct of_device_id *id;
struct act8865_platform_data pdata_of;
id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
if (!id)
return -ENODEV;
ret = act8865_pdata_from_dt(dev, of_node, &pdata_of);
if (ret < 0)
return ret;
pdata = &pdata_of;
}
if (pdata->num_regulators > ACT8865_REG_NUM) {
dev_err(dev, "Too many regulators found!\n");
return -EINVAL;
}
act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
if (!act8865)
return -ENOMEM;
rdev = act8865->rdev;
act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config);
if (IS_ERR(act8865->regmap)) {
error = PTR_ERR(act8865->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
/* Finally register devices */
for (i = 0; i < ACT8865_REG_NUM; i++) {
id = pdata->regulators[i].id;
config.dev = dev;
config.init_data = pdata->regulators[i].platform_data;
config.of_node = of_node[i];
config.driver_data = act8865;
config.regmap = act8865->regmap;
rdev[i] = devm_regulator_register(&client->dev,
&act8865_reg[i], &config);
if (IS_ERR(rdev[i])) {
dev_err(dev, "failed to register %s\n",
act8865_reg[id].name);
return PTR_ERR(rdev[i]);
}
}
i2c_set_clientdata(client, act8865);
return 0;
}
static const struct i2c_device_id act8865_ids[] = {
{ "act8865", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, act8865_ids);
static struct i2c_driver act8865_pmic_driver = {
.driver = {
.name = "act8865",
.owner = THIS_MODULE,
},
.probe = act8865_pmic_probe,
.id_table = act8865_ids,
};
module_i2c_driver(act8865_pmic_driver);
MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver");
MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
MODULE_LICENSE("GPL v2");
......@@ -122,10 +122,8 @@ static int anatop_regulator_probe(struct platform_device *pdev)
if (!sreg)
return -ENOMEM;
sreg->initdata = initdata;
sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL),
GFP_KERNEL);
sreg->name = of_get_property(np, "regulator-name", NULL);
rdesc = &sreg->rdesc;
memset(rdesc, 0, sizeof(*rdesc));
rdesc->name = sreg->name;
rdesc->ops = &anatop_rops;
rdesc->type = REGULATOR_VOLTAGE;
......@@ -143,37 +141,37 @@ static int anatop_regulator_probe(struct platform_device *pdev)
&sreg->control_reg);
if (ret) {
dev_err(dev, "no anatop-reg-offset property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-vol-bit-width",
&sreg->vol_bit_width);
if (ret) {
dev_err(dev, "no anatop-vol-bit-width property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-vol-bit-shift",
&sreg->vol_bit_shift);
if (ret) {
dev_err(dev, "no anatop-vol-bit-shift property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-min-bit-val",
&sreg->min_bit_val);
if (ret) {
dev_err(dev, "no anatop-min-bit-val property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-min-voltage",
&sreg->min_voltage);
if (ret) {
dev_err(dev, "no anatop-min-voltage property set\n");
goto anatop_probe_end;
return ret;
}
ret = of_property_read_u32(np, "anatop-max-voltage",
&sreg->max_voltage);
if (ret) {
dev_err(dev, "no anatop-max-voltage property set\n");
goto anatop_probe_end;
return ret;
}
/* read LDO ramp up setting, only for core reg */
......@@ -204,27 +202,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
if (IS_ERR(rdev)) {
dev_err(dev, "failed to register %s\n",
rdesc->name);
ret = PTR_ERR(rdev);
goto anatop_probe_end;
return PTR_ERR(rdev);
}
platform_set_drvdata(pdev, rdev);
anatop_probe_end:
if (ret)
kfree(sreg->name);
return ret;
}
static int anatop_regulator_remove(struct platform_device *pdev)
{
struct regulator_dev *rdev = platform_get_drvdata(pdev);
struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
const char *name = sreg->name;
kfree(name);
return 0;
}
......@@ -240,7 +222,6 @@ static struct platform_driver anatop_regulator_driver = {
.of_match_table = of_anatop_regulator_match_tbl,
},
.probe = anatop_regulator_probe,
.remove = anatop_regulator_remove,
};
static int __init anatop_regulator_init(void)
......@@ -259,3 +240,4 @@ MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>");
MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
MODULE_DESCRIPTION("ANATOP Regulator driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:anatop_regulator");
......@@ -28,8 +28,6 @@
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f
struct arizona_micsupp {
struct regulator_dev *regulator;
struct arizona *arizona;
......@@ -40,42 +38,6 @@ struct arizona_micsupp {
struct work_struct check_cp_work;
};
static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector > ARIZONA_MICSUPP_MAX_SELECTOR)
return -EINVAL;
if (selector == ARIZONA_MICSUPP_MAX_SELECTOR)
return 3300000;
else
return (selector * 50000) + 1700000;
}
static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
unsigned int voltage;
int selector;
if (min_uV < 1700000)
min_uV = 1700000;
if (min_uV > 3200000)
selector = ARIZONA_MICSUPP_MAX_SELECTOR;
else
selector = DIV_ROUND_UP(min_uV - 1700000, 50000);
if (selector < 0)
return -EINVAL;
voltage = arizona_micsupp_list_voltage(rdev, selector);
if (voltage < min_uV || voltage > max_uV)
return -EINVAL;
return selector;
}
static void arizona_micsupp_check_cp(struct work_struct *work)
{
struct arizona_micsupp *micsupp =
......@@ -145,8 +107,8 @@ static struct regulator_ops arizona_micsupp_ops = {
.disable = arizona_micsupp_disable,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = arizona_micsupp_list_voltage,
.map_voltage = arizona_micsupp_map_voltage,
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
......@@ -155,11 +117,16 @@ static struct regulator_ops arizona_micsupp_ops = {
.set_bypass = arizona_micsupp_set_bypass,
};
static const struct regulator_linear_range arizona_micsupp_ranges[] = {
REGULATOR_LINEAR_RANGE(1700000, 0, 0x1e, 50000),
REGULATOR_LINEAR_RANGE(3300000, 0x1f, 0x1f, 0),
};
static const struct regulator_desc arizona_micsupp = {
.name = "MICVDD",
.supply_name = "CPVDD",
.type = REGULATOR_VOLTAGE,
.n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1,
.n_voltages = 32,
.ops = &arizona_micsupp_ops,
.vsel_reg = ARIZONA_LDO2_CONTROL_1,
......@@ -169,6 +136,9 @@ static const struct regulator_desc arizona_micsupp = {
.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.bypass_mask = ARIZONA_CPMIC_BYPASS,
.linear_ranges = arizona_micsupp_ranges,
.n_linear_ranges = ARRAY_SIZE(arizona_micsupp_ranges),
.enable_time = 3000,
.owner = THIS_MODULE,
......
......@@ -99,7 +99,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK,
.control_reg = AS3722_SD0_CONTROL_REG,
.mode_mask = AS3722_SD0_MODE_FAST,
.n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_SD1,
......@@ -112,7 +111,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK,
.control_reg = AS3722_SD1_CONTROL_REG,
.mode_mask = AS3722_SD1_MODE_FAST,
.n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_SD2,
......@@ -181,7 +179,6 @@ static const struct as3722_register_mapping as3722_reg_lookup[] = {
.sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK,
.control_reg = AS3722_SD6_CONTROL_REG,
.mode_mask = AS3722_SD6_MODE_FAST,
.n_voltages = AS3722_SD0_VSEL_MAX + 1,
},
{
.regulator_id = AS3722_REGULATOR_ID_LDO0,
......@@ -595,6 +592,22 @@ static int as3722_sd016_set_current_limit(struct regulator_dev *rdev,
return as3722_update_bits(as3722, reg, mask, val);
}
static bool as3722_sd0_is_low_voltage(struct as3722_regulators *as3722_regs)
{
int err;
unsigned val;
err = as3722_read(as3722_regs->as3722, AS3722_FUSE7_REG, &val);
if (err < 0) {
dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
AS3722_FUSE7_REG, err);
return false;
}
if (val & AS3722_FUSE7_SD0_LOW_VOLTAGE)
return true;
return false;
}
static const struct regulator_linear_range as3722_sd2345_ranges[] = {
REGULATOR_LINEAR_RANGE(612500, 0x01, 0x40, 12500),
REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000),
......@@ -820,9 +833,19 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_sd016_extcntrl_ops;
else
ops = &as3722_sd016_ops;
as3722_regs->desc[id].min_uV = 610000;
if (id == AS3722_REGULATOR_ID_SD0 &&
as3722_sd0_is_low_voltage(as3722_regs)) {
as3722_regs->desc[id].n_voltages =
AS3722_SD0_VSEL_LOW_VOL_MAX + 1;
as3722_regs->desc[id].min_uV = 410000;
} else {
as3722_regs->desc[id].n_voltages =
AS3722_SD0_VSEL_MAX + 1,
as3722_regs->desc[id].min_uV = 610000;
}
as3722_regs->desc[id].uV_step = 10000;
as3722_regs->desc[id].linear_min_sel = 1;
as3722_regs->desc[id].enable_time = 600;
break;
case AS3722_REGULATOR_ID_SD2:
case AS3722_REGULATOR_ID_SD3:
......@@ -842,9 +865,6 @@ static int as3722_regulator_probe(struct platform_device *pdev)
ops = &as3722_ldo_extcntrl_ops;
else
ops = &as3722_ldo_ops;
as3722_regs->desc[id].min_uV = 825000;
as3722_regs->desc[id].uV_step = 25000;
as3722_regs->desc[id].linear_min_sel = 1;
as3722_regs->desc[id].enable_time = 500;
as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
as3722_regs->desc[id].n_linear_ranges =
......
......@@ -1334,9 +1334,8 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
* If we have return value from dev_lookup fail, we do not expect to
* succeed, so, quit with appropriate error value
*/
if (ret && ret != -ENODEV) {
if (ret && ret != -ENODEV)
goto out;
}
if (!devname)
devname = "deviceless";
......@@ -1351,7 +1350,8 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
rdev = dummy_regulator_rdev;
goto found;
} else {
/* Don't log an error when called from regulator_get_optional() */
} else if (!have_full_constraints() || exclusive) {
dev_err(dev, "dummy supplies not allowed\n");
}
......@@ -2244,7 +2244,7 @@ int regulator_is_supported_voltage(struct regulator *regulator,
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
return (min_uV <= ret && ret <= max_uV);
return min_uV <= ret && ret <= max_uV;
else
return ret;
}
......@@ -2416,7 +2416,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
if (ret < 0)
goto out;
/* restore original values in case of error */
old_min_uV = regulator->min_uV;
old_max_uV = regulator->max_uV;
......@@ -2430,7 +2430,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
if (ret < 0)
goto out2;
out:
mutex_unlock(&rdev->mutex);
return ret;
......@@ -3835,9 +3835,8 @@ static int __init regulator_init_complete(void)
* goes wrong. */
rdev_info(rdev, "disabling\n");
ret = ops->disable(rdev);
if (ret != 0) {
if (ret != 0)
rdev_err(rdev, "couldn't disable: %d\n", ret);
}
} else {
/* The intention is that in future we will
* assume that full constraints are provided
......
......@@ -431,17 +431,11 @@ static int db8500_regulator_register(struct platform_device *pdev,
config.of_node = np;
/* register with the regulator framework */
info->rdev = regulator_register(&info->desc, &config);
info->rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
if (IS_ERR(info->rdev)) {
err = PTR_ERR(info->rdev);
dev_err(&pdev->dev, "failed to register %s: err %i\n",
info->desc.name, err);
/* if failing, unregister all earlier regulators */
while (--id >= 0) {
info = &dbx500_regulator_info[id];
regulator_unregister(info->rdev);
}
return err;
}
......@@ -530,20 +524,8 @@ static int db8500_regulator_probe(struct platform_device *pdev)
static int db8500_regulator_remove(struct platform_device *pdev)
{
int i;
ux500_regulator_debug_exit();
for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) {
struct dbx500_regulator_info *info;
info = &dbx500_regulator_info[i];
dev_vdbg(rdev_get_dev(info->rdev),
"regulator-%s-remove\n", info->desc.name);
regulator_unregister(info->rdev);
}
return 0;
}
......
......@@ -203,17 +203,18 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
}
config->nr_states = i;
config->type = REGULATOR_VOLTAGE;
ret = of_property_read_string(np, "regulator-type", &regtype);
if (ret < 0) {
dev_err(dev, "Missing 'regulator-type' property\n");
return ERR_PTR(-EINVAL);
if (ret >= 0) {
if (!strncmp("voltage", regtype, 7))
config->type = REGULATOR_VOLTAGE;
else if (!strncmp("current", regtype, 7))
config->type = REGULATOR_CURRENT;
else
dev_warn(dev, "Unknown regulator-type '%s'\n",
regtype);
}
if (!strncmp("voltage", regtype, 7))
config->type = REGULATOR_VOLTAGE;
else if (!strncmp("current", regtype, 7))
config->type = REGULATOR_CURRENT;
return config;
}
......
......@@ -25,8 +25,6 @@ struct lp3971 {
struct device *dev;
struct mutex io_lock;
struct i2c_client *i2c;
int num_regulators;
struct regulator_dev **rdev;
};
static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
......@@ -383,42 +381,27 @@ static int setup_regulators(struct lp3971 *lp3971,
{
int i, err;
lp3971->num_regulators = pdata->num_regulators;
lp3971->rdev = kcalloc(pdata->num_regulators,
sizeof(struct regulator_dev *), GFP_KERNEL);
if (!lp3971->rdev) {
err = -ENOMEM;
goto err_nomem;
}
/* Instantiate the regulators */
for (i = 0; i < pdata->num_regulators; i++) {
struct regulator_config config = { };
struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
struct regulator_dev *rdev;
config.dev = lp3971->dev;
config.init_data = reg->initdata;
config.driver_data = lp3971;
lp3971->rdev[i] = regulator_register(&regulators[reg->id],
&config);
if (IS_ERR(lp3971->rdev[i])) {
err = PTR_ERR(lp3971->rdev[i]);
rdev = devm_regulator_register(lp3971->dev,
&regulators[reg->id], &config);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
dev_err(lp3971->dev, "regulator init failed: %d\n",
err);
goto error;
return err;
}
}
return 0;
error:
while (--i >= 0)
regulator_unregister(lp3971->rdev[i]);
kfree(lp3971->rdev);
lp3971->rdev = NULL;
err_nomem:
return err;
}
static int lp3971_i2c_probe(struct i2c_client *i2c,
......@@ -460,19 +443,6 @@ static int lp3971_i2c_probe(struct i2c_client *i2c,
return 0;
}
static int lp3971_i2c_remove(struct i2c_client *i2c)
{
struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
int i;
for (i = 0; i < lp3971->num_regulators; i++)
regulator_unregister(lp3971->rdev[i]);
kfree(lp3971->rdev);
return 0;
}
static const struct i2c_device_id lp3971_i2c_id[] = {
{ "lp3971", 0 },
{ }
......@@ -485,7 +455,6 @@ static struct i2c_driver lp3971_i2c_driver = {
.owner = THIS_MODULE,
},
.probe = lp3971_i2c_probe,
.remove = lp3971_i2c_remove,
.id_table = lp3971_i2c_id,
};
......
......@@ -22,8 +22,6 @@ struct lp3972 {
struct device *dev;
struct mutex io_lock;
struct i2c_client *i2c;
int num_regulators;
struct regulator_dev **rdev;
};
/* LP3972 Control Registers */
......@@ -478,41 +476,27 @@ static int setup_regulators(struct lp3972 *lp3972,
{
int i, err;
lp3972->num_regulators = pdata->num_regulators;
lp3972->rdev = kcalloc(pdata->num_regulators,
sizeof(struct regulator_dev *), GFP_KERNEL);
if (!lp3972->rdev) {
err = -ENOMEM;
goto err_nomem;
}
/* Instantiate the regulators */
for (i = 0; i < pdata->num_regulators; i++) {
struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
struct regulator_config config = { };
struct regulator_dev *rdev;
config.dev = lp3972->dev;
config.init_data = reg->initdata;
config.driver_data = lp3972;
lp3972->rdev[i] = regulator_register(&regulators[reg->id],
&config);
if (IS_ERR(lp3972->rdev[i])) {
err = PTR_ERR(lp3972->rdev[i]);
rdev = devm_regulator_register(lp3972->dev,
&regulators[reg->id], &config);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
dev_err(lp3972->dev, "regulator init failed: %d\n",
err);
goto error;
return err;
}
}
return 0;
error:
while (--i >= 0)
regulator_unregister(lp3972->rdev[i]);
kfree(lp3972->rdev);
lp3972->rdev = NULL;
err_nomem:
return err;
}
static int lp3972_i2c_probe(struct i2c_client *i2c,
......@@ -557,18 +541,6 @@ static int lp3972_i2c_probe(struct i2c_client *i2c,
return 0;
}
static int lp3972_i2c_remove(struct i2c_client *i2c)
{
struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
int i;
for (i = 0; i < lp3972->num_regulators; i++)
regulator_unregister(lp3972->rdev[i]);
kfree(lp3972->rdev);
return 0;
}
static const struct i2c_device_id lp3972_i2c_id[] = {
{ "lp3972", 0 },
{ }
......@@ -581,7 +553,6 @@ static struct i2c_driver lp3972_i2c_driver = {
.owner = THIS_MODULE,
},
.probe = lp3972_i2c_probe,
.remove = lp3972_i2c_remove,
.id_table = lp3972_i2c_id,
};
......
/*
* max14577.c - Regulator driver for the Maxim 14577
*
* Copyright (C) 2013 Samsung Electronics
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/mfd/max14577.h>
#include <linux/mfd/max14577-private.h>
#include <linux/regulator/of_regulator.h>
struct max14577_regulator {
struct device *dev;
struct max14577 *max14577;
struct regulator_dev **regulators;
};
static int max14577_reg_is_enabled(struct regulator_dev *rdev)
{
int rid = rdev_get_id(rdev);
struct regmap *rmap = rdev->regmap;
u8 reg_data;
switch (rid) {
case MAX14577_CHARGER:
max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0)
return 0;
max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
if ((reg_data & STATUS3_CGMBC_MASK) == 0)
return 0;
/* MBCHOSTEN and CGMBC are on */
return 1;
default:
return -EINVAL;
}
}
static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
{
u8 reg_data;
struct regmap *rmap = rdev->regmap;
if (rdev_get_id(rdev) != MAX14577_CHARGER)
return -EINVAL;
max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, &reg_data);
if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)
return MAX14577_REGULATOR_CURRENT_LIMIT_MIN;
reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>
CHGCTRL4_MBCICHWRCH_SHIFT);
return MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
reg_data * MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP;
}
static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
int i, current_bits = 0xf;
u8 reg_data;
if (rdev_get_id(rdev) != MAX14577_CHARGER)
return -EINVAL;
if (min_uA > MAX14577_REGULATOR_CURRENT_LIMIT_MAX ||
max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_MIN)
return -EINVAL;
if (max_uA < MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START) {
/* Less than 200 mA, so set 90mA (turn only Low Bit off) */
u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
return max14577_update_reg(rdev->regmap,
MAX14577_CHG_REG_CHG_CTRL4,
CHGCTRL4_MBCICHWRCL_MASK, reg_data);
}
/* max_uA is in range: <LIMIT_HIGH_START, inifinite>, so search for
* valid current starting from LIMIT_MAX. */
for (i = MAX14577_REGULATOR_CURRENT_LIMIT_MAX;
i >= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START;
i -= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP) {
if (i <= max_uA)
break;
current_bits--;
}
BUG_ON(current_bits < 0); /* Cannot happen */
/* Turn Low Bit on (use range 200mA-950 mA) */
reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
/* and set proper High Bits */
reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
reg_data);
}
static struct regulator_ops max14577_safeout_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.list_voltage = regulator_list_voltage_linear,
};
static struct regulator_ops max14577_charger_ops = {
.is_enabled = max14577_reg_is_enabled,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_current_limit = max14577_reg_get_current_limit,
.set_current_limit = max14577_reg_set_current_limit,
};
static const struct regulator_desc supported_regulators[] = {
[MAX14577_SAFEOUT] = {
.name = "SAFEOUT",
.id = MAX14577_SAFEOUT,
.ops = &max14577_safeout_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = MAX14577_REGULATOR_SAFEOUT_VOLTAGE,
.enable_reg = MAX14577_REG_CONTROL2,
.enable_mask = CTRL2_SFOUTORD_MASK,
},
[MAX14577_CHARGER] = {
.name = "CHARGER",
.id = MAX14577_CHARGER,
.ops = &max14577_charger_ops,
.type = REGULATOR_CURRENT,
.owner = THIS_MODULE,
.enable_reg = MAX14577_CHG_REG_CHG_CTRL2,
.enable_mask = CHGCTRL2_MBCHOSTEN_MASK,
},
};
#ifdef CONFIG_OF
static struct of_regulator_match max14577_regulator_matches[] = {
{ .name = "SAFEOUT", },
{ .name = "CHARGER", },
};
static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev)
{
int ret;
struct device_node *np;
np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
if (!np) {
dev_err(&pdev->dev, "Failed to get child OF node for regulators\n");
return -EINVAL;
}
ret = of_regulator_match(&pdev->dev, np, max14577_regulator_matches,
MAX14577_REG_MAX);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
return ret;
}
return 0;
}
static inline struct regulator_init_data *match_init_data(int index)
{
return max14577_regulator_matches[index].init_data;
}
static inline struct device_node *match_of_node(int index)
{
return max14577_regulator_matches[index].of_node;
}
#else /* CONFIG_OF */
static int max14577_regulator_dt_parse_pdata(struct platform_device *pdev)
{
return 0;
}
static inline struct regulator_init_data *match_init_data(int index)
{
return NULL;
}
static inline struct device_node *match_of_node(int index)
{
return NULL;
}
#endif /* CONFIG_OF */
static int max14577_regulator_probe(struct platform_device *pdev)
{
struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
int i, ret;
struct regulator_config config = {};
ret = max14577_regulator_dt_parse_pdata(pdev);
if (ret)
return ret;
config.dev = &pdev->dev;
config.regmap = max14577->regmap;
for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
struct regulator_dev *regulator;
/*
* Index of supported_regulators[] is also the id and must
* match index of pdata->regulators[].
*/
if (pdata && pdata->regulators) {
config.init_data = pdata->regulators[i].initdata;
config.of_node = pdata->regulators[i].of_node;
} else {
config.init_data = match_init_data(i);
config.of_node = match_of_node(i);
}
regulator = devm_regulator_register(&pdev->dev,
&supported_regulators[i], &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
dev_err(&pdev->dev,
"Regulator init failed for ID %d with error: %d\n",
i, ret);
return ret;
}
}
return ret;
}
static struct platform_driver max14577_regulator_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "max14577-regulator",
},
.probe = max14577_regulator_probe,
};
static int __init max14577_regulator_init(void)
{
BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
BUILD_BUG_ON(ARRAY_SIZE(supported_regulators) != MAX14577_REG_MAX);
return platform_driver_register(&max14577_regulator_driver);
}
subsys_initcall(max14577_regulator_init);
static void __exit max14577_regulator_exit(void)
{
platform_driver_unregister(&max14577_regulator_driver);
}
module_exit(max14577_regulator_exit);
MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
MODULE_DESCRIPTION("MAXIM 14577 regulator driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:max14577-regulator");
......@@ -138,6 +138,7 @@ static struct regulator_ops max77693_charger_ops = {
.n_voltages = 4, \
.ops = &max77693_safeout_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.volt_table = max77693_safeout_table, \
.vsel_reg = MAX77693_CHG_REG_SAFEOUT_CTRL, \
.vsel_mask = SAFEOUT_CTRL_SAFEOUT##_num##_MASK, \
......
......@@ -274,25 +274,25 @@ static struct mc13xxx_regulator mc13892_regulators[] = {
MC13892_SW_DEFINE(SW4, SWITCHERS3, SWITCHERS3, mc13892_sw),
MC13892_FIXED_DEFINE(SWBST, SWITCHERS5, mc13892_swbst),
MC13892_FIXED_DEFINE(VIOHI, REGULATORMODE0, mc13892_viohi),
MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VPLL, REGULATORMODE0, REGULATORSETTING0,
mc13892_vpll),
MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VDIG, REGULATORMODE0, REGULATORSETTING0,
mc13892_vdig),
MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1, \
MC13892_DEFINE_REGU(VSD, REGULATORMODE1, REGULATORSETTING1,
mc13892_vsd),
MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VUSB2, REGULATORMODE0, REGULATORSETTING0,
mc13892_vusb2),
MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1, \
MC13892_DEFINE_REGU(VVIDEO, REGULATORMODE1, REGULATORSETTING1,
mc13892_vvideo),
MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1, \
MC13892_DEFINE_REGU(VAUDIO, REGULATORMODE1, REGULATORSETTING1,
mc13892_vaudio),
MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VCAM, REGULATORMODE1, REGULATORSETTING0,
mc13892_vcam),
MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VGEN1, REGULATORMODE0, REGULATORSETTING0,
mc13892_vgen1),
MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VGEN2, REGULATORMODE0, REGULATORSETTING0,
mc13892_vgen2),
MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0, \
MC13892_DEFINE_REGU(VGEN3, REGULATORMODE1, REGULATORSETTING0,
mc13892_vgen3),
MC13892_FIXED_DEFINE(VUSB, USB1, mc13892_vusb),
MC13892_GPO_DEFINE(GPO1, POWERMISC, mc13892_gpo),
......@@ -476,8 +476,8 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
}
mc13xxx_lock(priv->mc13xxx);
ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask,
reg_value);
ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg,
mask, reg_value);
mc13xxx_unlock(priv->mc13xxx);
return ret;
......
......@@ -105,7 +105,7 @@ static int pcf50633_regulator_probe(struct platform_device *pdev)
static struct platform_driver pcf50633_regulator_driver = {
.driver = {
.name = "pcf50633-regltr",
.name = "pcf50633-regulator",
},
.probe = pcf50633_regulator_probe,
};
......
......@@ -309,21 +309,24 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip)
return ret;
switch (value & 0x0f) {
/* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
case 0x8:
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
case 0x0:
break;
default:
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
/*
* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013
* as ID=8
*/
case 0x8:
dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
case 0x0:
break;
default:
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
return -ENODEV;
}
ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
if (ret)
return ret;
dev_info(pfuze_chip->dev,
"Full lay: %x, Metal lay: %x\n",
"Full layer: %x, Metal layer: %x\n",
(value & 0xf0) >> 4, value & 0x0f);
ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
......@@ -408,31 +411,18 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
config.driver_data = pfuze_chip;
config.of_node = match_of_node(i);
pfuze_chip->regulators[i] = regulator_register(desc, &config);
pfuze_chip->regulators[i] =
devm_regulator_register(&client->dev, desc, &config);
if (IS_ERR(pfuze_chip->regulators[i])) {
dev_err(&client->dev, "register regulator%s failed\n",
pfuze100_regulators[i].desc.name);
ret = PTR_ERR(pfuze_chip->regulators[i]);
while (--i >= 0)
regulator_unregister(pfuze_chip->regulators[i]);
return ret;
return PTR_ERR(pfuze_chip->regulators[i]);
}
}
return 0;
}
static int pfuze100_regulator_remove(struct i2c_client *client)
{
int i;
struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
regulator_unregister(pfuze_chip->regulators[i]);
return 0;
}
static struct i2c_driver pfuze_driver = {
.id_table = pfuze_device_id,
.driver = {
......@@ -441,7 +431,6 @@ static struct i2c_driver pfuze_driver = {
.of_match_table = pfuze_dt_ids,
},
.probe = pfuze100_regulator_probe,
.remove = pfuze100_regulator_remove,
};
module_i2c_driver(pfuze_driver);
......
......@@ -70,8 +70,6 @@ static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
ramp_delay = s2mps11->ramp_delay2;
break;
case S2MPS11_BUCK3:
ramp_delay = s2mps11->ramp_delay34;
break;
case S2MPS11_BUCK4:
ramp_delay = s2mps11->ramp_delay34;
break;
......
......@@ -23,6 +23,7 @@
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
#define S5M8767_OPMODE_NORMAL_MODE 0x1
......@@ -120,8 +121,8 @@ static const struct sec_voltage_desc *reg_voltage_map[] = {
[S5M8767_BUCK4] = &buck_voltage_val2,
[S5M8767_BUCK5] = &buck_voltage_val1,
[S5M8767_BUCK6] = &buck_voltage_val1,
[S5M8767_BUCK7] = NULL,
[S5M8767_BUCK8] = NULL,
[S5M8767_BUCK7] = &buck_voltage_val3,
[S5M8767_BUCK8] = &buck_voltage_val3,
[S5M8767_BUCK9] = &buck_voltage_val3,
};
......@@ -217,7 +218,7 @@ static int s5m8767_reg_is_enabled(struct regulator_dev *rdev)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
int enable_ctrl;
unsigned int val;
ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
......@@ -226,37 +227,38 @@ static int s5m8767_reg_is_enabled(struct regulator_dev *rdev)
else if (ret)
return ret;
ret = sec_reg_read(s5m8767->iodev, reg, &val);
ret = regmap_read(s5m8767->iodev->regmap_pmic, reg, &val);
if (ret)
return ret;
return (val & mask) == enable_ctrl;
return (val & S5M8767_ENCTRL_MASK) == enable_ctrl;
}
static int s5m8767_reg_enable(struct regulator_dev *rdev)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
int enable_ctrl;
ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
if (ret)
return ret;
return sec_reg_update(s5m8767->iodev, reg, enable_ctrl, mask);
return regmap_update_bits(s5m8767->iodev->regmap_pmic, reg,
S5M8767_ENCTRL_MASK, enable_ctrl);
}
static int s5m8767_reg_disable(struct regulator_dev *rdev)
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
int ret, reg, enable_ctrl;
ret = s5m8767_get_register(rdev, &reg, &enable_ctrl);
if (ret)
return ret;
return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
return regmap_update_bits(s5m8767->iodev->regmap_pmic, reg,
S5M8767_ENCTRL_MASK, ~S5M8767_ENCTRL_MASK);
}
static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
......@@ -417,9 +419,12 @@ static struct regulator_ops s5m8767_ops = {
};
static struct regulator_ops s5m8767_buck78_ops = {
.list_voltage = regulator_list_voltage_linear,
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
#define s5m8767_regulator_desc(_name) { \
......@@ -745,17 +750,20 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
pdata->buck2_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init);
regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK2DVS2,
buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
pdata->buck3_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init);
regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK3DVS2,
buck_init);
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
pdata->buck4_init);
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init);
regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK4DVS2,
buck_init);
for (i = 0; i < 8; i++) {
if (s5m8767->buck2_gpiodvs) {
......@@ -837,71 +845,76 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
pdata->buck4_gpiodvs) {
sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK2CTRL,
(pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1),
1 << 1);
sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK3CTRL,
(pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1),
1 << 1);
sec_reg_update(s5m8767->iodev, S5M8767_REG_BUCK4CTRL,
(pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1),
1 << 1);
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_BUCK2CTRL, 1 << 1,
(pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_BUCK3CTRL, 1 << 1,
(pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_BUCK4CTRL, 1 << 1,
(pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
}
/* Initialize GPIO DVS registers */
for (i = 0; i < 8; i++) {
if (s5m8767->buck2_gpiodvs) {
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS1 + i,
s5m8767->buck2_vol[i]);
regmap_write(s5m8767->iodev->regmap_pmic,
S5M8767_REG_BUCK2DVS1 + i,
s5m8767->buck2_vol[i]);
}
if (s5m8767->buck3_gpiodvs) {
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS1 + i,
s5m8767->buck3_vol[i]);
regmap_write(s5m8767->iodev->regmap_pmic,
S5M8767_REG_BUCK3DVS1 + i,
s5m8767->buck3_vol[i]);
}
if (s5m8767->buck4_gpiodvs) {
sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS1 + i,
s5m8767->buck4_vol[i]);
regmap_write(s5m8767->iodev->regmap_pmic,
S5M8767_REG_BUCK4DVS1 + i,
s5m8767->buck4_vol[i]);
}
}
if (s5m8767->buck2_ramp)
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x08, 0x08);
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_DVSRAMP, 0x08, 0x08);
if (s5m8767->buck3_ramp)
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x04, 0x04);
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_DVSRAMP, 0x04, 0x04);
if (s5m8767->buck4_ramp)
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP, 0x02, 0x02);
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_DVSRAMP, 0x02, 0x02);
if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
|| s5m8767->buck4_ramp) {
unsigned int val;
switch (s5m8767->ramp_delay) {
case 5:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0x40, 0xf0);
val = S5M8767_DVS_BUCK_RAMP_5;
break;
case 10:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0x90, 0xf0);
val = S5M8767_DVS_BUCK_RAMP_10;
break;
case 25:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0xd0, 0xf0);
val = S5M8767_DVS_BUCK_RAMP_25;
break;
case 50:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0xe0, 0xf0);
val = S5M8767_DVS_BUCK_RAMP_50;
break;
case 100:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0xf0, 0xf0);
val = S5M8767_DVS_BUCK_RAMP_100;
break;
default:
sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
0x90, 0xf0);
val = S5M8767_DVS_BUCK_RAMP_10;
}
regmap_update_bits(s5m8767->iodev->regmap_pmic,
S5M8767_REG_DVSRAMP,
S5M8767_DVS_BUCK_RAMP_MASK,
val << S5M8767_DVS_BUCK_RAMP_SHIFT);
}
for (i = 0; i < pdata->num_regulators; i++) {
......
......@@ -74,7 +74,8 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev)
config.init_data = of_get_regulator_init_data(&pdev->dev,
pdev->dev.of_node);
stw481x->vmmc_regulator = regulator_register(&vmmc_regulator, &config);
stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev,
&vmmc_regulator, &config);
if (IS_ERR(stw481x->vmmc_regulator)) {
dev_err(&pdev->dev,
"error initializing STw481x VMMC regulator\n");
......@@ -85,14 +86,6 @@ static int stw481x_vmmc_regulator_probe(struct platform_device *pdev)
return 0;
}
static int stw481x_vmmc_regulator_remove(struct platform_device *pdev)
{
struct stw481x *stw481x = dev_get_platdata(&pdev->dev);
regulator_unregister(stw481x->vmmc_regulator);
return 0;
}
static const struct of_device_id stw481x_vmmc_match[] = {
{ .compatible = "st,stw481x-vmmc", },
{},
......@@ -105,7 +98,6 @@ static struct platform_driver stw481x_vmmc_regulator_driver = {
.of_match_table = stw481x_vmmc_match,
},
.probe = stw481x_vmmc_regulator_probe,
.remove = stw481x_vmmc_regulator_remove,
};
module_platform_driver(stw481x_vmmc_regulator_driver);
......@@ -70,16 +70,16 @@
#define TPS51632_POWER_STATE_SINGLE_PHASE_CCM 0x1
#define TPS51632_POWER_STATE_SINGLE_PHASE_DCM 0x2
#define TPS51632_MIN_VOLATGE 500000
#define TPS51632_MAX_VOLATGE 1520000
#define TPS51632_VOLATGE_STEP_10mV 10000
#define TPS51632_VOLATGE_STEP_20mV 20000
#define TPS51632_MIN_VOLTAGE 500000
#define TPS51632_MAX_VOLTAGE 1520000
#define TPS51632_VOLTAGE_STEP_10mV 10000
#define TPS51632_VOLTAGE_STEP_20mV 20000
#define TPS51632_MAX_VSEL 0x7F
#define TPS51632_MIN_VSEL 0x19
#define TPS51632_DEFAULT_RAMP_DELAY 6000
#define TPS51632_VOLT_VSEL(uV) \
(DIV_ROUND_UP(uV - TPS51632_MIN_VOLATGE, \
TPS51632_VOLATGE_STEP_10mV) + \
(DIV_ROUND_UP(uV - TPS51632_MIN_VOLTAGE, \
TPS51632_VOLTAGE_STEP_10mV) + \
TPS51632_MIN_VSEL)
/* TPS51632 chip information */
......@@ -243,9 +243,9 @@ static struct tps51632_regulator_platform_data *
pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV");
pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? :
TPS51632_MIN_VOLATGE;
TPS51632_MIN_VOLTAGE;
pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? :
TPS51632_MAX_VOLATGE;
TPS51632_MAX_VOLTAGE;
return pdata;
}
#else
......@@ -284,15 +284,15 @@ static int tps51632_probe(struct i2c_client *client,
}
if (pdata->enable_pwm_dvfs) {
if ((pdata->base_voltage_uV < TPS51632_MIN_VOLATGE) ||
(pdata->base_voltage_uV > TPS51632_MAX_VOLATGE)) {
if ((pdata->base_voltage_uV < TPS51632_MIN_VOLTAGE) ||
(pdata->base_voltage_uV > TPS51632_MAX_VOLTAGE)) {
dev_err(&client->dev, "Invalid base_voltage_uV setting\n");
return -EINVAL;
}
if ((pdata->max_voltage_uV) &&
((pdata->max_voltage_uV < TPS51632_MIN_VOLATGE) ||
(pdata->max_voltage_uV > TPS51632_MAX_VOLATGE))) {
((pdata->max_voltage_uV < TPS51632_MIN_VOLTAGE) ||
(pdata->max_voltage_uV > TPS51632_MAX_VOLTAGE))) {
dev_err(&client->dev, "Invalid max_voltage_uV setting\n");
return -EINVAL;
}
......@@ -305,11 +305,11 @@ static int tps51632_probe(struct i2c_client *client,
}
tps->dev = &client->dev;
tps->desc.name = id->name;
tps->desc.name = client->name;
tps->desc.id = 0;
tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
tps->desc.min_uV = TPS51632_MIN_VOLATGE;
tps->desc.uV_step = TPS51632_VOLATGE_STEP_10mV;
tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
tps->desc.ops = &tps51632_dcdc_ops;
......
......@@ -360,7 +360,7 @@ static int tps62360_probe(struct i2c_client *client,
dev_err(&client->dev, "Error: No device match found\n");
return -ENODEV;
}
chip_id = (int)match->data;
chip_id = (int)(long)match->data;
if (!pdata)
pdata = of_get_tps62360_platform_data(&client->dev);
} else if (id) {
......
......@@ -88,6 +88,11 @@ static const unsigned int VMMC_VSEL_table[] = {
1800000, 2800000, 3000000, 3300000,
};
/* supported BBCH voltages in microvolts */
static const unsigned int VBB_VSEL_table[] = {
3000000, 2520000, 3150000, 5000000,
};
struct tps_info {
const char *name;
const char *vin_name;
......@@ -183,6 +188,12 @@ static struct tps_info tps65910_regs[] = {
.voltage_table = VMMC_VSEL_table,
.enable_time_us = 100,
},
{
.name = "vbb",
.vin_name = "vcc7",
.n_voltages = ARRAY_SIZE(VBB_VSEL_table),
.voltage_table = VBB_VSEL_table,
},
};
static struct tps_info tps65911_regs[] = {
......@@ -339,6 +350,8 @@ static int tps65910_get_ctrl_register(int id)
return TPS65910_VAUX33;
case TPS65910_REG_VMMC:
return TPS65910_VMMC;
case TPS65910_REG_VBB:
return TPS65910_BBCH;
default:
return -EINVAL;
}
......@@ -528,6 +541,10 @@ static int tps65910_get_voltage_sel(struct regulator_dev *dev)
value &= LDO_SEL_MASK;
value >>= LDO_SEL_SHIFT;
break;
case TPS65910_REG_VBB:
value &= BBCH_BBSEL_MASK;
value >>= BBCH_BBSEL_SHIFT;
break;
default:
return -EINVAL;
}
......@@ -638,6 +655,9 @@ static int tps65910_set_voltage_sel(struct regulator_dev *dev,
case TPS65910_REG_VMMC:
return tps65910_reg_update_bits(pmic->mfd, reg, LDO_SEL_MASK,
selector << LDO_SEL_SHIFT);
case TPS65910_REG_VBB:
return tps65910_reg_update_bits(pmic->mfd, reg, BBCH_BBSEL_MASK,
selector << BBCH_BBSEL_SHIFT);
}
return -EINVAL;
......@@ -669,6 +689,9 @@ static int tps65911_set_voltage_sel(struct regulator_dev *dev,
case TPS65910_REG_VIO:
return tps65910_reg_update_bits(pmic->mfd, reg, LDO_SEL_MASK,
selector << LDO_SEL_SHIFT);
case TPS65910_REG_VBB:
return tps65910_reg_update_bits(pmic->mfd, reg, BBCH_BBSEL_MASK,
selector << BBCH_BBSEL_SHIFT);
}
return -EINVAL;
......@@ -762,6 +785,18 @@ static struct regulator_ops tps65910_ops_vdd3 = {
.map_voltage = regulator_map_voltage_ascend,
};
static struct regulator_ops tps65910_ops_vbb = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_mode = tps65910_set_mode,
.get_mode = tps65910_get_mode,
.get_voltage_sel = tps65910_get_voltage_sel,
.set_voltage_sel = tps65910_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_iterate,
};
static struct regulator_ops tps65910_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
......@@ -944,6 +979,7 @@ static struct of_regulator_match tps65910_matches[] = {
{ .name = "vaux2", .driver_data = (void *) &tps65910_regs[10] },
{ .name = "vaux33", .driver_data = (void *) &tps65910_regs[11] },
{ .name = "vmmc", .driver_data = (void *) &tps65910_regs[12] },
{ .name = "vbb", .driver_data = (void *) &tps65910_regs[13] },
};
static struct of_regulator_match tps65911_matches[] = {
......@@ -1145,6 +1181,10 @@ static int tps65910_probe(struct platform_device *pdev)
pmic->desc[i].ops = &tps65910_ops_dcdc;
pmic->desc[i].ramp_delay = 5000;
}
} else if (i == TPS65910_REG_VBB &&
tps65910_chip_id(tps65910) == TPS65910) {
pmic->desc[i].ops = &tps65910_ops_vbb;
pmic->desc[i].volt_table = info->voltage_table;
} else {
if (tps65910_chip_id(tps65910) == TPS65910) {
pmic->desc[i].ops = &tps65910_ops;
......
......@@ -58,7 +58,7 @@ struct twlreg_info {
struct regulator_desc desc;
/* chip specific features */
unsigned long features;
unsigned long features;
/*
* optional override functions for voltage set/get
......@@ -1128,7 +1128,7 @@ static int twlreg_probe(struct platform_device *pdev)
if (!initdata)
return -EINVAL;
info = kmemdup(template, sizeof (*info), GFP_KERNEL);
info = kmemdup(template, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
......
......@@ -762,8 +762,7 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_REG, 0);
if (res == NULL) {
dev_err(&pdev->dev, "No REG resource\n");
ret = -EINVAL;
goto err;
return -EINVAL;
}
dcdc->base = res->start;
......@@ -788,7 +787,7 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
ret = PTR_ERR(dcdc->regulator);
dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
id + 1, ret);
goto err;
return ret;
}
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "UV"));
......@@ -799,15 +798,12 @@ static int wm831x_boostp_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
irq, ret);
goto err;
return ret;
}
platform_set_drvdata(pdev, dcdc);
return 0;
err:
return ret;
}
static struct platform_driver wm831x_boostp_driver = {
......
......@@ -151,6 +151,7 @@
#define AS3722_ASIC_ID1_REG 0x90
#define AS3722_ASIC_ID2_REG 0x91
#define AS3722_LOCK_REG 0x9E
#define AS3722_FUSE7_REG 0xA7
#define AS3722_MAX_REGISTER 0xF4
#define AS3722_SD0_EXT_ENABLE_MASK 0x03
......@@ -224,6 +225,7 @@
#define AS3722_SD_VSEL_MASK 0x7F
#define AS3722_SD0_VSEL_MIN 0x01
#define AS3722_SD0_VSEL_MAX 0x5A
#define AS3722_SD0_VSEL_LOW_VOL_MAX 0x6E
#define AS3722_SD2_VSEL_MIN 0x01
#define AS3722_SD2_VSEL_MAX 0x7F
......@@ -342,6 +344,8 @@
#define AS3722_EXT_CONTROL_ENABLE2 0x2
#define AS3722_EXT_CONTROL_ENABLE3 0x3
#define AS3722_FUSE7_SD0_LOW_VOLTAGE BIT(4)
/* Interrupt IDs */
enum as3722_irq {
AS3722_IRQ_LID,
......
......@@ -59,12 +59,6 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic);
void sec_irq_exit(struct sec_pmic_dev *sec_pmic);
int sec_irq_resume(struct sec_pmic_dev *sec_pmic);
extern int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest);
extern int sec_bulk_read(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf);
extern int sec_reg_write(struct sec_pmic_dev *sec_pmic, u8 reg, u8 value);
extern int sec_bulk_write(struct sec_pmic_dev *sec_pmic, u8 reg, int count, u8 *buf);
extern int sec_reg_update(struct sec_pmic_dev *sec_pmic, u8 reg, u8 val, u8 mask);
struct sec_platform_data {
struct sec_regulator_data *regulators;
struct sec_opmode_data *opmode;
......
......@@ -183,6 +183,22 @@ enum s5m8767_regulators {
S5M8767_REG_MAX,
};
#define S5M8767_ENCTRL_SHIFT 6
#define S5M8767_ENCTRL_SHIFT 6
#define S5M8767_ENCTRL_MASK (0x3 << S5M8767_ENCTRL_SHIFT)
/*
* Values for BUCK_RAMP field in DVS_RAMP register, matching raw values
* in mV/us.
*/
enum s5m8767_dvs_buck_ramp_values {
S5M8767_DVS_BUCK_RAMP_5 = 0x4,
S5M8767_DVS_BUCK_RAMP_10 = 0x9,
S5M8767_DVS_BUCK_RAMP_12_5 = 0xb,
S5M8767_DVS_BUCK_RAMP_25 = 0xd,
S5M8767_DVS_BUCK_RAMP_50 = 0xe,
S5M8767_DVS_BUCK_RAMP_100 = 0xf,
};
#define S5M8767_DVS_BUCK_RAMP_SHIFT 4
#define S5M8767_DVS_BUCK_RAMP_MASK (0xf << S5M8767_DVS_BUCK_RAMP_SHIFT)
#endif /* __LINUX_MFD_S5M8767_H */
......@@ -358,8 +358,6 @@
/*Register BBCH (0x80) register.RegisterDescription */
#define BBCH_BBSEL_MASK 0x06
#define BBCH_BBSEL_SHIFT 1
#define BBCH_BBCHEN_MASK 0x01
#define BBCH_BBCHEN_SHIFT 0
/*Register DCDCCTRL (0x80) register.RegisterDescription */
......@@ -833,6 +831,7 @@
#define TPS65910_REG_VAUX2 10
#define TPS65910_REG_VAUX33 11
#define TPS65910_REG_VMMC 12
#define TPS65910_REG_VBB 13
#define TPS65911_REG_VDDCTRL 4
#define TPS65911_REG_LDO1 5
......@@ -845,7 +844,7 @@
#define TPS65911_REG_LDO8 12
/* Max number of TPS65910/11 regulators */
#define TPS65910_NUM_REGS 13
#define TPS65910_NUM_REGS 14
/* External sleep controls through EN1/EN2/EN3/SLEEP inputs */
#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN1 0x1
......
/*
* act8865.h -- Voltage regulation for the active-semi act8865
*
* Copyright (C) 2013 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __LINUX_REGULATOR_ACT8865_H
#define __LINUX_REGULATOR_ACT8865_H
#include <linux/regulator/machine.h>
enum {
ACT8865_ID_DCDC1,
ACT8865_ID_DCDC2,
ACT8865_ID_DCDC3,
ACT8865_ID_LDO1,
ACT8865_ID_LDO2,
ACT8865_ID_LDO3,
ACT8865_ID_LDO4,
ACT8865_REG_NUM,
};
/**
* act8865_regulator_data - regulator data
* @id: regulator id
* @name: regulator name
* @platform_data: regulator init data
*/
struct act8865_regulator_data {
int id;
const char *name;
struct regulator_init_data *platform_data;
};
/**
* act8865_platform_data - platform data for act8865
* @num_regulators: number of regulators used
* @regulators: pointer to regulators used
*/
struct act8865_platform_data {
int num_regulators;
struct act8865_regulator_data *regulators;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment