Commit 1537b26d authored by Pavel Tatashin's avatar Pavel Tatashin Committed by David S. Miller

sparc64: use latency groups to improve add_node_ranges speed

add_node_ranges() takes 2.6s - 3.6s per 1T of boot time. On machine with 6T
memory it takes 15.4s, on 32T it would take 82s-115s of boot time.
This function sets NUMA ids for memory blocks, and scans the whole memory a
page at a time to do so. But, we could use values in latency groups mask
and match to determine the boundaries without checking every single page.
With the fix the add_node_ranges() time is reduced from 15.4s down to 0.2s
on machine with 6T memory.
Signed-off-by: default avatarPavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: default avatarBabu Moger <babu.moger@oracle.com>
Reviewed-by: default avatarBob Picco <bob.picco@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dcd1912d
......@@ -829,13 +829,23 @@ static void __init find_ramdisk(unsigned long phys_base)
struct node_mem_mask {
unsigned long mask;
unsigned long val;
unsigned long match;
};
static struct node_mem_mask node_masks[MAX_NUMNODES];
static int num_node_masks;
#ifdef CONFIG_NEED_MULTIPLE_NODES
struct mdesc_mlgroup {
u64 node;
u64 latency;
u64 match;
u64 mask;
};
static struct mdesc_mlgroup *mlgroups;
static int num_mlgroups;
int numa_cpu_lookup_table[NR_CPUS];
cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
......@@ -846,78 +856,129 @@ struct mdesc_mblock {
};
static struct mdesc_mblock *mblocks;
static int num_mblocks;
static int find_numa_node_for_addr(unsigned long pa,
struct node_mem_mask *pnode_mask);
static unsigned long __init ra_to_pa(unsigned long addr)
static struct mdesc_mblock * __init addr_to_mblock(unsigned long addr)
{
struct mdesc_mblock *m = NULL;
int i;
for (i = 0; i < num_mblocks; i++) {
struct mdesc_mblock *m = &mblocks[i];
m = &mblocks[i];
if (addr >= m->base &&
addr < (m->base + m->size)) {
addr += m->offset;
break;
}
}
return addr;
return m;
}
static int __init find_node(unsigned long addr)
static u64 __init memblock_nid_range_sun4u(u64 start, u64 end, int *nid)
{
static bool search_mdesc = true;
static struct node_mem_mask last_mem_mask = { ~0UL, ~0UL };
static int last_index;
int i;
int prev_nid, new_nid;
addr = ra_to_pa(addr);
for (i = 0; i < num_node_masks; i++) {
struct node_mem_mask *p = &node_masks[i];
prev_nid = -1;
for ( ; start < end; start += PAGE_SIZE) {
for (new_nid = 0; new_nid < num_node_masks; new_nid++) {
struct node_mem_mask *p = &node_masks[new_nid];
if ((addr & p->mask) == p->val)
return i;
}
/* The following condition has been observed on LDOM guests because
* node_masks only contains the best latency mask and value.
* LDOM guest's mdesc can contain a single latency group to
* cover multiple address range. Print warning message only if the
* address cannot be found in node_masks nor mdesc.
*/
if ((search_mdesc) &&
((addr & last_mem_mask.mask) != last_mem_mask.val)) {
/* find the available node in the mdesc */
last_index = find_numa_node_for_addr(addr, &last_mem_mask);
numadbg("find_node: latency group for address 0x%lx is %d\n",
addr, last_index);
if ((last_index < 0) || (last_index >= num_node_masks)) {
/* WARN_ONCE() and use default group 0 */
WARN_ONCE(1, "find_node: A physical address doesn't match a NUMA node rule. Some physical memory will be owned by node 0.");
search_mdesc = false;
last_index = 0;
if ((start & p->mask) == p->match) {
if (prev_nid == -1)
prev_nid = new_nid;
break;
}
}
if (new_nid == num_node_masks) {
prev_nid = 0;
WARN_ONCE(1, "addr[%Lx] doesn't match a NUMA node rule. Some memory will be owned by node 0.",
start);
break;
}
if (prev_nid != new_nid)
break;
}
*nid = prev_nid;
return last_index;
return start > end ? end : start;
}
static u64 __init memblock_nid_range(u64 start, u64 end, int *nid)
{
*nid = find_node(start);
start += PAGE_SIZE;
while (start < end) {
int n = find_node(start);
u64 ret_end, pa_start, m_mask, m_match, m_end;
struct mdesc_mblock *mblock;
int _nid, i;
if (tlb_type != hypervisor)
return memblock_nid_range_sun4u(start, end, nid);
mblock = addr_to_mblock(start);
if (!mblock) {
WARN_ONCE(1, "memblock_nid_range: Can't find mblock addr[%Lx]",
start);
_nid = 0;
ret_end = end;
goto done;
}
pa_start = start + mblock->offset;
m_match = 0;
m_mask = 0;
for (_nid = 0; _nid < num_node_masks; _nid++) {
struct node_mem_mask *const m = &node_masks[_nid];
if (n != *nid)
if ((pa_start & m->mask) == m->match) {
m_match = m->match;
m_mask = m->mask;
break;
start += PAGE_SIZE;
}
}
if (start > end)
start = end;
if (num_node_masks == _nid) {
/* We could not find NUMA group, so default to 0, but lets
* search for latency group, so we could calculate the correct
* end address that we return
*/
_nid = 0;
return start;
for (i = 0; i < num_mlgroups; i++) {
struct mdesc_mlgroup *const m = &mlgroups[i];
if ((pa_start & m->mask) == m->match) {
m_match = m->match;
m_mask = m->mask;
break;
}
}
if (i == num_mlgroups) {
WARN_ONCE(1, "memblock_nid_range: Can't find latency group addr[%Lx]",
start);
ret_end = end;
goto done;
}
}
/*
* Each latency group has match and mask, and each memory block has an
* offset. An address belongs to a latency group if its address matches
* the following formula: ((addr + offset) & mask) == match
* It is, however, slow to check every single page if it matches a
* particular latency group. As optimization we calculate end value by
* using bit arithmetics.
*/
m_end = m_match + (1ul << __ffs(m_mask)) - mblock->offset;
m_end += pa_start & ~((1ul << fls64(m_mask)) - 1);
ret_end = m_end > end ? end : m_end;
done:
*nid = _nid;
return ret_end;
}
#endif
......@@ -958,7 +1019,8 @@ static void init_node_masks_nonnuma(void)
numadbg("Initializing tables for non-numa.\n");
node_masks[0].mask = node_masks[0].val = 0;
node_masks[0].mask = 0;
node_masks[0].match = 0;
num_node_masks = 1;
#ifdef CONFIG_NEED_MULTIPLE_NODES
......@@ -976,15 +1038,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table);
EXPORT_SYMBOL(numa_cpumask_lookup_table);
EXPORT_SYMBOL(node_data);
struct mdesc_mlgroup {
u64 node;
u64 latency;
u64 match;
u64 mask;
};
static struct mdesc_mlgroup *mlgroups;
static int num_mlgroups;
static int scan_pio_for_cfg_handle(struct mdesc_handle *md, u64 pio,
u32 cfg_handle)
{
......@@ -1226,41 +1279,6 @@ int __node_distance(int from, int to)
return numa_latency[from][to];
}
static int find_numa_node_for_addr(unsigned long pa,
struct node_mem_mask *pnode_mask)
{
struct mdesc_handle *md = mdesc_grab();
u64 node, arc;
int i = 0;
node = mdesc_node_by_name(md, MDESC_NODE_NULL, "latency-groups");
if (node == MDESC_NODE_NULL)
goto out;
mdesc_for_each_node_by_name(md, node, "group") {
mdesc_for_each_arc(arc, md, node, MDESC_ARC_TYPE_FWD) {
u64 target = mdesc_arc_target(md, arc);
struct mdesc_mlgroup *m = find_mlgroup(target);
if (!m)
continue;
if ((pa & m->mask) == m->match) {
if (pnode_mask) {
pnode_mask->mask = m->mask;
pnode_mask->val = m->match;
}
mdesc_release(md);
return i;
}
}
i++;
}
out:
mdesc_release(md);
return -1;
}
static int __init find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp)
{
int i;
......@@ -1268,7 +1286,7 @@ static int __init find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp)
for (i = 0; i < MAX_NUMNODES; i++) {
struct node_mem_mask *n = &node_masks[i];
if ((grp->mask == n->mask) && (grp->match == n->val))
if ((grp->mask == n->mask) && (grp->match == n->match))
break;
}
return i;
......@@ -1323,10 +1341,10 @@ static int __init numa_attach_mlgroup(struct mdesc_handle *md, u64 grp,
n = &node_masks[num_node_masks++];
n->mask = candidate->mask;
n->val = candidate->match;
n->match = candidate->match;
numadbg("NUMA NODE[%d]: mask[%lx] val[%lx] (latency[%llx])\n",
index, n->mask, n->val, candidate->latency);
numadbg("NUMA NODE[%d]: mask[%lx] match[%lx] (latency[%llx])\n",
index, n->mask, n->match, candidate->latency);
return 0;
}
......@@ -1423,7 +1441,7 @@ static int __init numa_parse_jbus(void)
numa_cpu_lookup_table[cpu] = index;
cpumask_copy(&numa_cpumask_lookup_table[index], cpumask_of(cpu));
node_masks[index].mask = ~((1UL << 36UL) - 1UL);
node_masks[index].val = cpu << 36UL;
node_masks[index].match = cpu << 36UL;
index++;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment