Commit 154f23a8 authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson

arm64: dts: qcom: msm8916: Move aliases to boards

MSM8939 has the aliases defined separately for each board (because
there could be (theoretically) a board where the slots are numbered
differently. To make MSM8916 and MSM8939 more consistent do the same
for all MSM8916 boards and move aliases there.
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Reviewed-by: default avatarBryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230525-msm8916-labels-v1-6-bec0f5fb46fb@gerhold.net
parent 274cf2bd
......@@ -18,6 +18,8 @@ / {
compatible = "qcom,apq8016-sbc", "qcom,apq8016";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
serial1 = &blsp_uart1;
usid0 = &pm8916_0;
......
......@@ -22,6 +22,8 @@ / {
chassis-type = "tablet";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -13,6 +13,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -13,6 +13,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -14,6 +14,8 @@ / {
chassis-type = "tablet";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -26,6 +26,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -14,6 +14,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -13,6 +13,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -8,6 +8,8 @@
/ {
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -9,6 +9,8 @@
/ {
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -7,6 +7,8 @@
/ {
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -28,6 +28,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -9,6 +9,7 @@ / {
chassis-type = "embedded";
aliases {
mmc0 = &sdhc_1; /* eMMC */
serial0 = &blsp_uart2;
};
......
......@@ -16,6 +16,8 @@ / {
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
......
......@@ -18,11 +18,6 @@ / {
#address-cells = <2>;
#size-cells = <2>;
aliases {
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
mmc1 = &sdhc_2; /* SDC2 SD card slot */
};
chosen { };
memory@80000000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment