Commit 155142fc authored by Roland Vossen's avatar Roland Vossen Committed by Greg Kroah-Hartman

staging: brcm80211: removed all ASSERTs from wl_mac80211.c

Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 5dfa128f
......@@ -185,10 +185,6 @@ static int wl_ops_start(struct ieee80211_hw *hw)
static void wl_ops_stop(struct ieee80211_hw *hw)
{
#ifdef BRCMDBG
struct wl_info *wl = hw->priv;
ASSERT(wl);
#endif /*BRCMDBG*/
ieee80211_stop_queues(hw);
}
......@@ -280,7 +276,6 @@ static int wl_ops_config(struct ieee80211_hw *hw, u32 changed)
goto config_out;
}
wlc_iovar_getint(wl->wlc, "bcn_li_bcn", &new_int);
ASSERT(new_int == conf->listen_interval);
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR)
wiphy_err(wiphy, "%s: change monitor mode: %s (implement)\n",
......@@ -617,13 +612,12 @@ wl_ops_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
u8 buf_size)
{
#if defined(BCMDBG)
struct scb *scb = (struct scb *)sta->drv_priv;
#endif
struct wl_info *wl = hw->priv;
int status;
ASSERT(scb->magic == SCB_MAGIC);
if (WARN_ON(scb->magic != SCB_MAGIC))
return -EIDRM;
switch (action) {
case IEEE80211_AMPDU_RX_START:
break;
......@@ -636,7 +630,7 @@ wl_ops_ampdu_action(struct ieee80211_hw *hw,
if (!status) {
wiphy_err(wl->wiphy, "START: tid %d is not agg\'able\n",
tid);
return -1;
return -EINVAL;
}
/* XXX: Use the starting sequence number provided ... */
*ssn = 0;
......@@ -721,7 +715,7 @@ static int wl_set_hint(struct wl_info *wl, char *abbrev)
static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
uint bustype, void *btparam, uint irq)
{
struct wl_info *wl;
struct wl_info *wl = NULL;
int unit, err;
unsigned long base_addr;
......@@ -737,8 +731,10 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
/* allocate private info */
hw = pci_get_drvdata(btparam); /* btparam == pdev */
wl = hw->priv;
ASSERT(wl);
if (hw != NULL)
wl = hw->priv;
if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
return NULL;
wl->wiphy = hw->wiphy;
atomic_set(&wl->callbacks, 0);
......@@ -774,7 +770,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
"%s\n", KBUILD_MODNAME, "/lib/firmware/brcm");
wl_release_fw(wl);
wl_remove((struct pci_dev *)btparam);
goto fail1;
return NULL;
}
/* common load-time initialization */
......@@ -789,9 +785,6 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
wl->pub = wlc_pub(wl->wlc);
wl->pub->ieee_hw = hw;
ASSERT(wl->pub->ieee_hw);
ASSERT(wl->pub->ieee_hw->priv == wl);
if (wlc_iovar_setint(wl->wlc, "mpc", 0)) {
wiphy_err(wl->wiphy, "wl%d: Error setting MPC variable to 0\n",
......@@ -816,7 +809,8 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
}
memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
ASSERT(is_valid_ether_addr(perm));
if (WARN_ON(!is_valid_ether_addr(perm)))
goto fail;
SET_IEEE80211_PERM_ADDR(hw, perm);
err = ieee80211_register_hw(hw);
......@@ -839,7 +833,6 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs,
fail:
wl_free(wl);
fail1:
return NULL;
}
......@@ -1037,8 +1030,7 @@ static int ieee_hw_rate_init(struct ieee80211_hw *hw)
}
hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl_band_2GHz_nphy;
} else {
BUG();
return -1;
return -EPERM;
}
/* Assume all bands use the same phy. True for 11n devices. */
......@@ -1048,7 +1040,7 @@ static int ieee_hw_rate_init(struct ieee80211_hw *hw)
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&wl_band_5GHz_nphy;
} else {
return -1;
return -EPERM;
}
}
return 0;
......@@ -1098,8 +1090,6 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct ieee80211_hw *hw;
u32 val;
ASSERT(pdev);
WL_TRACE("%s: bus %d slot %d func %d irq %d\n",
__func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn), pdev->irq);
......@@ -1126,8 +1116,7 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw = ieee80211_alloc_hw(sizeof(struct wl_info), &wl_ops);
if (!hw) {
pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
rc = -ENOMEM;
goto err_1;
return -ENOMEM;
}
SET_IEEE80211_DEV(hw, &pdev->dev);
......@@ -1145,9 +1134,6 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
}
return 0;
err_1:
pr_err("%s: err_1: Major hoarkage\n", __func__);
return 0;
}
static int wl_suspend(struct pci_dev *pdev, pm_message_t state)
......@@ -1337,7 +1323,6 @@ static void wl_free(struct wl_info *wl)
{
struct wl_timer *t, *next;
ASSERT(wl);
/* free ucode data */
if (wl->fw.fw_cnt)
wl_ucode_data_free();
......@@ -1533,7 +1518,6 @@ static irqreturn_t BCMFASTPATH wl_isr(int irq, void *dev_id)
/* ...and call the second level interrupt handler */
/* schedule dpc */
ASSERT(wl->resched == false);
tasklet_schedule(&wl->tasklet);
}
}
......@@ -1661,8 +1645,6 @@ void wl_add_timer(struct wl_info *wl, struct wl_timer *t, uint ms, int periodic)
__func__, t->name, periodic);
}
#endif
ASSERT(!t->set);
t->ms = ms;
t->periodic = (bool) periodic;
t->set = true;
......@@ -1738,8 +1720,6 @@ static int wl_linux_watchdog(void *ctx)
uint id;
/* refresh stats */
if (wl->pub->up) {
ASSERT(wl->stats_id < 2);
cnt = wl->pub->_cnt;
id = 1 - wl->stats_id;
stats = &wl->stats_watchdog[id];
......@@ -1824,14 +1804,18 @@ int wl_ucode_init_uint(struct wl_info *wl, u32 *data, u32 idx)
entry++, hdr++) {
if (hdr->idx == idx) {
pdata = wl->fw.fw_bin[i]->data + hdr->offset;
ASSERT(hdr->len == 4);
if (hdr->len != 4) {
wiphy_err(wl->wiphy,
"ERROR: fw hdr len\n");
return -ENOMSG;
}
*data = *((u32 *) pdata);
return 0;
}
}
}
wiphy_err(wl->wiphy, "ERROR: ucode tag:%d can not be found!\n", idx);
return -1;
return -ENOMSG;
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment