ethtool: Introduce n-tuple filter programming support

This patchset enables the ethtool layer to program n-tuple
filters to an underlying device.  The idea is to allow capable
hardware to have static rules applied that can assist steering
flows into appropriate queues.

Hardware that is known to support these types of filters today
are ixgbe and niu.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

include/linux/ethtool.h

@@ -14,6 +14,7 @@
 #define _LINUX_ETHTOOL_H
 
 #include <linux/types.h>
+#include <linux/rculist.h>
 
 /* This should work for both 32 and 64 bit userland. */
 struct ethtool_cmd {
@@ -242,6 +243,7 @@ enum ethtool_stringset {
 	ETH_SS_TEST		= 0,
 	ETH_SS_STATS,
 	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,
 };
 
 /* for passing string sets for data tagging */
@@ -290,6 +292,7 @@ struct ethtool_perm_addr {
  */
 enum ethtool_flags {
 	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
 };
 
 /* The following structures are for supporting RX network flow
@@ -363,6 +366,35 @@ struct ethtool_rxnfc {
 	__u32				rule_locs[0];
 };
 
+struct ethtool_rx_ntuple_flow_spec {
+	__u32		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_rawip4_spec		raw_ip4_spec;
+		struct ethtool_ether_spec		ether_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		__u8					hdata[64];
+	} h_u, m_u; /* entry, mask */
+
+	__u16	        vlan_tag;
+	__u16	        vlan_tag_mask;
+	__u64		data;      /* user-defined flow spec data */
+	__u64		data_mask; /* user-defined flow spec mask */
+
+	/* signed to distinguish between queue and actions (DROP) */
+	__s32		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP -1
+};
+
+struct ethtool_rx_ntuple {
+	__u32					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
 #define ETHTOOL_FLASH_MAX_FILENAME	128
 enum ethtool_flash_op_type {
 	ETHTOOL_FLASH_ALL_REGIONS	= 0,
@@ -377,6 +409,18 @@ struct ethtool_flash {
 
 #ifdef __KERNEL__
 
+struct ethtool_rx_ntuple_flow_spec_container {
+	struct ethtool_rx_ntuple_flow_spec fs;
+	struct list_head list;
+};
+
+struct ethtool_rx_ntuple_list {
+#define ETHTOOL_MAX_NTUPLE_LIST_ENTRY 1024
+#define ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY 14
+	struct list_head	list;
+	unsigned int		count;
+};
+
 struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
@@ -394,6 +438,7 @@ u32 ethtool_op_get_ufo(struct net_device *dev);
 int ethtool_op_set_ufo(struct net_device *dev, u32 data);
 u32 ethtool_op_get_flags(struct net_device *dev);
 int ethtool_op_set_flags(struct net_device *dev, u32 data);
+void ethtool_ntuple_flush(struct net_device *dev);
 
 /**
  * &ethtool_ops - Alter and report network device settings
@@ -500,6 +545,8 @@ struct ethtool_ops {
 	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 	int     (*flash_device)(struct net_device *, struct ethtool_flash *);
 	int	(*reset)(struct net_device *, u32 *);
+	int	(*set_rx_ntuple)(struct net_device *, struct ethtool_rx_ntuple *);
+	int	(*get_rx_ntuple)(struct net_device *, u32 stringset, void *);
 };
 #endif /* __KERNEL__ */
 
@@ -559,6 +606,9 @@ struct ethtool_ops {
 #define	ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
 #define	ETHTOOL_RESET		0x00000034 /* Reset hardware */
 
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* Get n-tuple filters from device */
+
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
 #define SPARC_ETH_SSET		ETHTOOL_SSET

include/linux/netdevice.h

@@ -746,6 +746,7 @@ struct net_device {
 #define NETIF_F_FCOE_CRC	(1 << 24) /* FCoE CRC32 */
 #define NETIF_F_SCTP_CSUM	(1 << 25) /* SCTP checksum offload */
 #define NETIF_F_FCOE_MTU	(1 << 26) /* Supports max FCoE MTU, 2158 bytes*/
+#define NETIF_F_NTUPLE		(1 << 27) /* N-tuple filters supported */
 
 	/* Segmentation offload features */
 #define NETIF_F_GSO_SHIFT	16
@@ -954,6 +955,8 @@ struct net_device {
 	/* max exchange id for FCoE LRO by ddp */
 	unsigned int		fcoe_ddp_xid;
 #endif
+	/* n-tuple filter list attached to this device */
+	struct ethtool_rx_ntuple_list ethtool_ntuple_list;
 };
 #define to_net_dev(d) container_of(d, struct net_device, dev)
 

net/core/dev.c

@@ -5419,6 +5419,8 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 
 	netdev_init_queues(dev);
 
+	INIT_LIST_HEAD(&dev->ethtool_ntuple_list.list);
+	dev->ethtool_ntuple_list.count = 0;
 	INIT_LIST_HEAD(&dev->napi_list);
 	INIT_LIST_HEAD(&dev->unreg_list);
 	INIT_LIST_HEAD(&dev->link_watch_list);
@@ -5455,6 +5457,9 @@ void free_netdev(struct net_device *dev)
 	/* Flush device addresses */
 	dev_addr_flush(dev);
 
+	/* Clear ethtool n-tuple list */
+	ethtool_ntuple_flush(dev);
+
 	list_for_each_entry_safe(p, n, &dev->napi_list, dev_list)
 		netif_napi_del(p);