Commit 1595b37c authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings

The Allwinner A80 SoC has a consumer IR receiver, which is the same as
older SoCs.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent d2118f06
...@@ -858,6 +858,18 @@ apbs_rst: reset@080014b0 { ...@@ -858,6 +858,18 @@ apbs_rst: reset@080014b0 {
#reset-cells = <1>; #reset-cells = <1>;
}; };
r_ir: ir@08002000 {
compatible = "allwinner,sun5i-a13-ir";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&r_ir_pins>;
clocks = <&apbs_gates 1>, <&r_ir_clk>;
clock-names = "apb", "ir";
resets = <&apbs_rst 1>;
reg = <0x08002000 0x40>;
status = "disabled";
};
r_uart: serial@08002800 { r_uart: serial@08002800 {
compatible = "snps,dw-apb-uart"; compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>; reg = <0x08002800 0x400>;
...@@ -881,6 +893,13 @@ r_pio: pinctrl@08002c00 { ...@@ -881,6 +893,13 @@ r_pio: pinctrl@08002c00 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
#gpio-cells = <3>; #gpio-cells = <3>;
r_ir_pins: r_ir {
allwinner,pins = "PL6";
allwinner,function = "s_cir_rx";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
}; };
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment