net: dpaa2-mac: populate supported_interfaces member

Populate the phy interface mode bitmap for the Freescale DPAA2 driver
with interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c

@@ -336,9 +336,30 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 			return err;
 	}
 
+	memset(&mac->phylink_config, 0, sizeof(mac->phylink_config));
 	mac->phylink_config.dev = &net_dev->dev;
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
+	/* We support the current interface mode, and if we have a PCS
+	 * similar interface modes that do not require the PLLs to be
+	 * reconfigured.
+	 */
+	__set_bit(mac->if_mode, mac->phylink_config.supported_interfaces);
+	if (mac->pcs) {
+		switch (mac->if_mode) {
+		case PHY_INTERFACE_MODE_1000BASEX:
+		case PHY_INTERFACE_MODE_SGMII:
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+				  mac->phylink_config.supported_interfaces);
+			__set_bit(PHY_INTERFACE_MODE_SGMII,
+				  mac->phylink_config.supported_interfaces);
+			break;
+
+		default:
+			break;
+		}
+	}
+
 	phylink = phylink_create(&mac->phylink_config,
 				 dpmac_node, mac->if_mode,
 				 &dpaa2_mac_phylink_ops);