Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Sixteen patches, mostly minor fixes and updates; however there are
  substantive driver bug fixes in pm8001, bnx2fc, zfcp, myrs and qedf"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: myrs: Fix crash in error case
  scsi: 53c700: Remove redundant assignment to pointer SCp
  scsi: ufs: Treat link loss as fatal error
  scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()
  scsi: bfa: Remove useless DMA-32 fallback configuration
  scsi: hisi_sas: Remove useless DMA-32 fallback configuration
  scsi: 3w-sas: Remove useless DMA-32 fallback configuration
  scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()
  scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices
  scsi: pm8001: Fix bogus FW crash for maxcpus=1
  scsi: qedf: Change context reset messages to ratelimited
  scsi: qedf: Fix refcount issue when LOGO is received during TMF
  scsi: qedf: Add stag_work to all the vports
  scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()
  scsi: target: iscsi: Make sure the np under each tpg is unique
  scsi: elx: efct: Don't use GFP_KERNEL under spin lock

drivers/s390/scsi/zfcp_fc.c

@@ -521,6 +521,8 @@ static void zfcp_fc_adisc_handler(void *data)
 		goto out;
 	}
 
+	/* re-init to undo drop from zfcp_fc_adisc() */
+	port->d_id = ntoh24(adisc_resp->adisc_port_id);
 	/* port is good, unblock rport without going through erp */
 	zfcp_scsi_schedule_rport_register(port);
  out:
@@ -534,6 +536,7 @@ static int zfcp_fc_adisc(struct zfcp_port *port)
 	struct zfcp_fc_req *fc_req;
 	struct zfcp_adapter *adapter = port->adapter;
 	struct Scsi_Host *shost = adapter->scsi_host;
+	u32 d_id;
 	int ret;
 
 	fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_ATOMIC);
@@ -558,7 +561,15 @@ static int zfcp_fc_adisc(struct zfcp_port *port)
 	fc_req->u.adisc.req.adisc_cmd = ELS_ADISC;
 	hton24(fc_req->u.adisc.req.adisc_port_id, fc_host_port_id(shost));
 
-	ret = zfcp_fsf_send_els(adapter, port->d_id, &fc_req->ct_els,
+	d_id = port->d_id; /* remember as destination for send els below */
+	/*
+	 * Force fresh GID_PN lookup on next port recovery.
+	 * Must happen after request setup and before sending request,
+	 * to prevent race with port->d_id re-init in zfcp_fc_adisc_handler().
+	 */
+	port->d_id = 0;
+
+	ret = zfcp_fsf_send_els(adapter, d_id, &fc_req->ct_els,
 				ZFCP_FC_CTELS_TMO);
 	if (ret)
 		kmem_cache_free(zfcp_fc_req_cache, fc_req);

drivers/scsi/3w-sas.c

@@ -1567,8 +1567,6 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
 	pci_try_set_mwi(pdev);
 
 	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (retval)
-		retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (retval) {
 		TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
 		retval = -ENODEV;
@@ -1786,8 +1784,6 @@ static int __maybe_unused twl_resume(struct device *dev)
 	pci_try_set_mwi(pdev);
 
 	retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (retval)
-		retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (retval) {
 		TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
 		retval = -ENODEV;

drivers/scsi/53c700.c

@@ -1507,7 +1507,6 @@ NCR_700_intr(int irq, void *dev_id)
 		struct scsi_cmnd *SCp = hostdata->cmd;
 
 		handled = 1;
-		SCp = hostdata->cmd;
 
 		if(istat & SCSI_INT_PENDING) {
 			udelay(10);

drivers/scsi/bfa/bfad.c

@@ -732,9 +732,6 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
 	pci_set_master(pdev);
 
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (rc)
-		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-
 	if (rc) {
 		rc = -ENODEV;
 		printk(KERN_ERR "dma_set_mask_and_coherent fail %p\n", pdev);
@@ -1559,9 +1556,6 @@ bfad_pci_slot_reset(struct pci_dev *pdev)
 	pci_set_master(pdev);
 
 	rc = dma_set_mask_and_coherent(&bfad->pcidev->dev, DMA_BIT_MASK(64));
-	if (rc)
-		rc = dma_set_mask_and_coherent(&bfad->pcidev->dev,
-					       DMA_BIT_MASK(32));
 	if (rc)
 		goto out_disable_device;
 

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

@@ -82,7 +82,7 @@ static int bnx2fc_bind_pcidev(struct bnx2fc_hba *hba);
 static void bnx2fc_unbind_pcidev(struct bnx2fc_hba *hba);
 static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
 				  struct device *parent, int npiv);
-static void bnx2fc_destroy_work(struct work_struct *work);
+static void bnx2fc_port_destroy(struct fcoe_port *port);
 
 static struct bnx2fc_hba *bnx2fc_hba_lookup(struct net_device *phys_dev);
 static struct bnx2fc_interface *bnx2fc_interface_lookup(struct net_device
@@ -907,9 +907,6 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
 				__bnx2fc_destroy(interface);
 		}
 		mutex_unlock(&bnx2fc_dev_lock);
-
-		/* Ensure ALL destroy work has been completed before return */
-		flush_workqueue(bnx2fc_wq);
 		return;
 
 	default:
@@ -1215,8 +1212,8 @@ static int bnx2fc_vport_destroy(struct fc_vport *vport)
 	mutex_unlock(&n_port->lp_mutex);
 	bnx2fc_free_vport(interface->hba, port->lport);
 	bnx2fc_port_shutdown(port->lport);
+	bnx2fc_port_destroy(port);
 	bnx2fc_interface_put(interface);
-	queue_work(bnx2fc_wq, &port->destroy_work);
 	return 0;
 }
 
@@ -1525,7 +1522,6 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
 	port->lport = lport;
 	port->priv = interface;
 	port->get_netdev = bnx2fc_netdev;
-	INIT_WORK(&port->destroy_work, bnx2fc_destroy_work);
 
 	/* Configure fcoe_port */
 	rc = bnx2fc_lport_config(lport);
@@ -1653,8 +1649,8 @@ static void __bnx2fc_destroy(struct bnx2fc_interface *interface)
 	bnx2fc_interface_cleanup(interface);
 	bnx2fc_stop(interface);
 	list_del(&interface->list);
+	bnx2fc_port_destroy(port);
 	bnx2fc_interface_put(interface);
-	queue_work(bnx2fc_wq, &port->destroy_work);
 }
 
 /**
@@ -1694,15 +1690,12 @@ static int bnx2fc_destroy(struct net_device *netdev)
 	return rc;
 }
 
-static void bnx2fc_destroy_work(struct work_struct *work)
+static void bnx2fc_port_destroy(struct fcoe_port *port)
 {
-	struct fcoe_port *port;
 	struct fc_lport *lport;
 
-	port = container_of(work, struct fcoe_port, destroy_work);
 	lport = port->lport;
-
-	BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
+	BNX2FC_HBA_DBG(lport, "Entered %s, destroying lport %p\n", __func__, lport);
 
 	bnx2fc_if_destroy(lport);
 }
@@ -2556,9 +2549,6 @@ static void bnx2fc_ulp_exit(struct cnic_dev *dev)
 			__bnx2fc_destroy(interface);
 	mutex_unlock(&bnx2fc_dev_lock);
 
-	/* Ensure ALL destroy work has been completed before return */
-	flush_workqueue(bnx2fc_wq);
-
 	bnx2fc_ulp_stop(hba);
 	/* unregister cnic device */
 	if (test_and_clear_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic))

drivers/scsi/elx/libefc/efc_els.c

@@ -46,18 +46,14 @@ efc_els_io_alloc_size(struct efc_node *node, u32 reqlen, u32 rsplen)
 
 	efc = node->efc;
 
-	spin_lock_irqsave(&node->els_ios_lock, flags);
-
 	if (!node->els_io_enabled) {
 		efc_log_err(efc, "els io alloc disabled\n");
-		spin_unlock_irqrestore(&node->els_ios_lock, flags);
 		return NULL;
 	}
 
 	els = mempool_alloc(efc->els_io_pool, GFP_ATOMIC);
 	if (!els) {
 		atomic_add_return(1, &efc->els_io_alloc_failed_count);
-		spin_unlock_irqrestore(&node->els_ios_lock, flags);
 		return NULL;
 	}
 
@@ -74,7 +70,6 @@ efc_els_io_alloc_size(struct efc_node *node, u32 reqlen, u32 rsplen)
 					      &els->io.req.phys, GFP_KERNEL);
 	if (!els->io.req.virt) {
 		mempool_free(els, efc->els_io_pool);
-		spin_unlock_irqrestore(&node->els_ios_lock, flags);
 		return NULL;
 	}
 
@@ -94,10 +89,11 @@ efc_els_io_alloc_size(struct efc_node *node, u32 reqlen, u32 rsplen)
 
 		/* add els structure to ELS IO list */
 		INIT_LIST_HEAD(&els->list_entry);
+		spin_lock_irqsave(&node->els_ios_lock, flags);
 		list_add_tail(&els->list_entry, &node->els_ios_list);
+		spin_unlock_irqrestore(&node->els_ios_lock, flags);
 	}
 
-	spin_unlock_irqrestore(&node->els_ios_lock, flags);
 	return els;
 }
 

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -2666,9 +2666,6 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
 		goto err_out;
 
 	error = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
-	if (error)
-		error = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-
 	if (error) {
 		dev_err(dev, "No usable DMA addressing method\n");
 		goto err_out;

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -4695,8 +4695,6 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_out;
 
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
-	if (rc)
-		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(dev, "No usable DMA addressing method\n");
 		rc = -ENODEV;

drivers/scsi/myrs.c

@@ -2267,7 +2267,8 @@ static void myrs_cleanup(struct myrs_hba *cs)
 	myrs_unmap(cs);
 
 	if (cs->mmio_base) {
-		cs->disable_intr(cs);
+		if (cs->disable_intr)
+			cs->disable_intr(cs);
 		iounmap(cs->mmio_base);
 		cs->mmio_base = NULL;
 	}

drivers/scsi/pm8001/pm80xx_hwi.c

@@ -4151,10 +4151,22 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	u32 ret = MPI_IO_STATUS_FAIL;
 	u32 regval;
 
+	/*
+	 * Fatal errors are programmed to be signalled in irq vector
+	 * pm8001_ha->max_q_num - 1 through pm8001_ha->main_cfg_tbl.pm80xx_tbl.
+	 * fatal_err_interrupt
+	 */
 	if (vec == (pm8001_ha->max_q_num - 1)) {
+		u32 mipsall_ready;
+
+		if (pm8001_ha->chip_id == chip_8008 ||
+		    pm8001_ha->chip_id == chip_8009)
+			mipsall_ready = SCRATCH_PAD_MIPSALL_READY_8PORT;
+		else
+			mipsall_ready = SCRATCH_PAD_MIPSALL_READY_16PORT;
+
 		regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
-		if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
-					SCRATCH_PAD_MIPSALL_READY) {
+		if ((regval & mipsall_ready) != mipsall_ready) {
 			pm8001_ha->controller_fatal_error = true;
 			pm8001_dbg(pm8001_ha, FAIL,
 				   "Firmware Fatal error! Regval:0x%x\n",

drivers/scsi/pm8001/pm80xx_hwi.h

@@ -1405,8 +1405,12 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 #define SCRATCH_PAD_BOOT_LOAD_SUCCESS	0x0
 #define SCRATCH_PAD_IOP0_READY		0xC00
 #define SCRATCH_PAD_IOP1_READY		0x3000
-#define SCRATCH_PAD_MIPSALL_READY	(SCRATCH_PAD_IOP1_READY | \
+#define SCRATCH_PAD_MIPSALL_READY_16PORT	(SCRATCH_PAD_IOP1_READY | \
 					SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_ILA_READY | \
+					SCRATCH_PAD_RAAE_READY)
+#define SCRATCH_PAD_MIPSALL_READY_8PORT	(SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_ILA_READY | \
 					SCRATCH_PAD_RAAE_READY)
 
 /* boot loader state */

drivers/scsi/qedf/qedf_io.c

@@ -2250,6 +2250,7 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req,
 	    io_req->tm_flags == FCP_TMF_TGT_RESET) {
 		clear_bit(QEDF_CMD_OUTSTANDING, &io_req->flags);
 		io_req->sc_cmd = NULL;
+		kref_put(&io_req->refcount, qedf_release_cmd);
 		complete(&io_req->tm_done);
 	}
 

drivers/scsi/qedf/qedf_main.c

@@ -911,7 +911,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
 	struct qed_link_output if_link;
 
 	if (lport->vport) {
-		QEDF_ERR(NULL, "Cannot issue host reset on NPIV port.\n");
+		printk_ratelimited("Cannot issue host reset on NPIV port.\n");
 		return;
 	}
 
@@ -1864,6 +1864,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled)
 	vport_qedf->cmd_mgr = base_qedf->cmd_mgr;
 	init_completion(&vport_qedf->flogi_compl);
 	INIT_LIST_HEAD(&vport_qedf->fcports);
+	INIT_DELAYED_WORK(&vport_qedf->stag_work, qedf_stag_change_work);
 
 	rc = qedf_vport_libfc_config(vport, vn_port);
 	if (rc) {
@@ -3980,7 +3981,9 @@ void qedf_stag_change_work(struct work_struct *work)
 	struct qedf_ctx *qedf =
 	    container_of(work, struct qedf_ctx, stag_work.work);
 
-	QEDF_ERR(&qedf->dbg_ctx, "Performing software context reset.\n");
+	printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.",
+			dev_name(&qedf->pdev->dev), __func__, __LINE__,
+			qedf->dbg_ctx.host_no);
 	qedf_ctx_soft_reset(qedf->lport);
 }
 

drivers/scsi/ufs/ufshcd-pltfrm.c

@@ -92,6 +92,11 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
 		clki->min_freq = clkfreq[i];
 		clki->max_freq = clkfreq[i+1];
 		clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
+		if (!clki->name) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
 		if (!strcmp(name, "ref_clk"))
 			clki->keep_link_active = true;
 		dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
@@ -127,6 +132,8 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
 		return -ENOMEM;
 
 	vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
+	if (!vreg->name)
+		return -ENOMEM;
 
 	snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
 	if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {

drivers/scsi/ufs/ufshcd.c

@@ -8613,7 +8613,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
  * @pwr_mode: device power mode to set
  *
  * Returns 0 if requested power mode is set successfully
- * Returns non-zero if failed to set the requested power mode
+ * Returns < 0 if failed to set the requested power mode
  */
 static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 				     enum ufs_dev_pwr_mode pwr_mode)
@@ -8667,8 +8667,11 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
 		sdev_printk(KERN_WARNING, sdp,
 			    "START_STOP failed for power mode: %d, result %x\n",
 			    pwr_mode, ret);
-		if (ret > 0 && scsi_sense_valid(&sshdr))
-			scsi_print_sense_hdr(sdp, NULL, &sshdr);
+		if (ret > 0) {
+			if (scsi_sense_valid(&sshdr))
+				scsi_print_sense_hdr(sdp, NULL, &sshdr);
+			ret = -EIO;
+		}
 	}
 
 	if (!ret)

drivers/scsi/ufs/ufshci.h

@@ -142,7 +142,8 @@ static inline u32 ufshci_version(u32 major, u32 minor)
 #define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
 				CONTROLLER_FATAL_ERROR |\
 				SYSTEM_BUS_FATAL_ERROR |\
-				CRYPTO_ENGINE_FATAL_ERROR)
+				CRYPTO_ENGINE_FATAL_ERROR |\
+				UIC_LINK_LOST)
 
 /* HCS - Host Controller Status 30h */
 #define DEVICE_PRESENT				0x1

drivers/target/iscsi/iscsi_target_tpg.c

@@ -443,6 +443,9 @@ static bool iscsit_tpg_check_network_portal(
 				break;
 		}
 		spin_unlock(&tpg->tpg_np_lock);
+
+		if (match)
+			break;
 	}
 	spin_unlock(&tiqn->tiqn_tpg_lock);