Skip to content

L
linux
Commit 16e024f3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 

Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlight is probably some base POWER8 support.  There's more
  to come such as transactional memory support but that will wait for
  the next one.

  Overall it's pretty quiet, or rather I've been pretty poor at picking
  things up from patchwork and reviewing them this time around and Kumar
  no better on the FSL side it seems..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
  powerpc+of: Rename and fix OF reconfig notifier error inject module
  powerpc: mpc5200: Add a3m071 board support
  powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
  powerpc/mpc52xx: use module_platform_driver macro
  powerpc+of: Export of_reconfig_notifier_[register,unregister]
  powerpc/dma/raidengine: add raidengine device
  powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
  powerpc/mpc85xx: Change spin table to cached memory
  powerpc/fsl-pci: Add PCI controller ATMU PM support
  powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
  drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
  powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
  powerpc: Disable relocation on exceptions when kexecing
  powerpc: Enable relocation on during exceptions at boot
  powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
  powerpc: Add wrappers to enable/disable relocation on exceptions
  powerpc: Add set_mode hcall
  powerpc: Setup relocation on exceptions for bare metal systems
  powerpc: Move initial mfspr LPCR out of __init_LPCR
  powerpc: Add relocation on exception vector handlers
  ...
parents c36e0501 376bddd3
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1545 additions and 839 deletions
Documentation/devicetree/bindings/powerpc/fsl/raideng.txt 0 → 100644
View file @ 16e024f3
* Freescale 85xx RAID Engine nodes
RAID Engine nodes are defined to describe on-chip RAID accelerators. Each RAID
Engine should have a separate node.
Supported chips:
P5020, P5040
Required properties:
- compatible: Should contain "fsl,raideng-v1.0" as the value
This identifies RAID Engine block. 1 in 1.0 represents
major number whereas 0 represents minor number. The
version matches the hardware IP version.
- reg: offset and length of the register set for the device
- ranges: standard ranges property specifying the translation
between child address space and parent address space
Example:
/* P5020 */
raideng: raideng@320000 {
compatible = "fsl,raideng-v1.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x320000 0x10000>;
ranges = <0 0x320000 0x10000>;
};
There must be a sub-node for each job queue present in RAID Engine
This node must be a sub-node of the main RAID Engine node
- compatible: Should contain "fsl,raideng-v1.0-job-queue" as the value
This identifies the job queue interface
- reg: offset and length of the register set for job queue
- ranges: standard ranges property specifying the translation
between child address space and parent address space
Example:
/* P5020 */
raideng_jq0@1000 {
compatible = "fsl,raideng-v1.0-job-queue";
reg = <0x1000 0x1000>;
ranges = <0x0 0x1000 0x1000>;
};
There must be a sub-node for each job ring present in RAID Engine
This node must be a sub-node of job queue node
- compatible: Must contain "fsl,raideng-v1.0-job-ring" as the value
This identifies job ring. Should contain either
"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
depending upon whether ring has high or low priority
- reg: offset and length of the register set for job ring
- interrupts: interrupt mapping for job ring IRQ
Optional property:
- fsl,liodn: Specifies the LIODN to be used for Job Ring. This
property is normally set by firmware. Value
is of 12-bits which is the LIODN number for this JR.
This property is used by the IOMMU (PAMU) to distinquish
transactions from this JR and than be able to do address
translation & protection accordingly.
Example:
/* P5020 */
raideng_jq0@1000 {
compatible = "fsl,raideng-v1.0-job-queue";
reg = <0x1000 0x1000>;
ranges = <0x0 0x1000 0x1000>;
raideng_jr0: jr@0 {
compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
reg = <0x0 0x400>;
interrupts = <139 2 0 0>;
interrupt-parent = <&mpic>;
fsl,liodn = <0x41>;
};
};
Documentation/powerpc/ptrace.txt
View file @ 16e024f3
......@@ -127,6 +127,22 @@ Some examples of using the structure to:
p.addr2 = (uint64_t) end_range;
p.condition_value = 0;
- set a watchpoint in server processors (BookS)
p.version = 1;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
or
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.addr = (uint64_t) begin_range;
/* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
* addr2 - addr <= 8 Bytes.
*/
p.addr2 = (uint64_t) end_range;
p.condition_value = 0;
3. PTRACE_DELHWDEBUG
Takes an integer which identifies an existing breakpoint or watchpoint
......
arch/arm/mach-mxs/mach-mxs.c
View file @ 16e024f3
......@@ -240,7 +240,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
macaddr[4] = (val >> 8) & 0xff;
macaddr[5] = (val >> 0) & 0xff;
prom_update_property(np, newmac);
of_update_property(np, newmac);
}
}
......
arch/powerpc/Makefile
View file @ 16e024f3
......@@ -181,7 +181,7 @@ $(BOOT_TARGETS2): vmlinux
bootwrapper_install:
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
%.dtb:
%.dtb: scripts
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
define archhelp
......
arch/powerpc/boot/dts/a3m071.dts 0 → 100644
View file @ 16e024f3
/*
* a3m071 board Device Tree Source
*
* Copyright 2012 Stefan Roese <sr@denx.de>
*
* Copyright (C) 2011 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* Copyright (C) 2007 Semihalf
* Marian Balakowicz <m8@semihalf.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
/ {
model = "anonymous,a3m071";
compatible = "anonymous,a3m071";
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; /* From boot loader */
system-frequency = <0>; /* From boot loader */
timer@600 {
fsl,has-wdt;
};
spi@f00 {
status = "disabled";
};
usb: usb@1000 {
status = "disabled";
};
psc@2000 {
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
psc@2200 {
status = "disabled";
};
psc@2400 {
status = "disabled";
};
psc@2600 {
status = "disabled";
};
psc@2800 {
status = "disabled";
};
psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
phy0: ethernet-phy@3 {
reg = <0x03>;
};
};
ata@3a00 {
status = "disabled";
};
i2c@3d00 {
status = "disabled";
};
i2c@3d40 {
status = "disabled";
};
};
localbus {
compatible = "fsl,mpc5200b-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x02000000
3 0 0xe9000000 0x00080000
5 0 0xe8000000 0x00010000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0x0 0x02000000>;
compatible = "cfi-flash";
bank-width = <2>;
partition@0x0 {
label = "u-boot";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@0x00040000 {
label = "env";
reg = <0x00040000 0x00020000>;
};
partition@0x00060000 {
label = "dtb";
reg = <0x00060000 0x00020000>;
};
partition@0x00080000 {
label = "kernel";
reg = <0x00080000 0x00500000>;
};
partition@0x00580000 {
label = "root";
reg = <0x00580000 0x00A80000>;
};
};
fpga@3,0 {
compatible = "anonymous,a3m071-fpga";
reg = <3 0x0 0x00080000
5 0x0 0x00010000>;
interrupts = <0 0 3>; /* level low */
};
};
pci@f0000d00 {
status = "disabled";
};
};
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
View file @ 16e024f3
......@@ -354,4 +354,5 @@ usb1: usb@211000 {
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec4.2-0.dtsi"
/include/ "qoriq-raid1.0-0.dtsi"
};
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
View file @ 16e024f3
......@@ -73,6 +73,12 @@ aliases {
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
raideng = &raideng;
raideng_jr0 = &raideng_jr0;
raideng_jr1 = &raideng_jr1;
raideng_jr2 = &raideng_jr2;
raideng_jr3 = &raideng_jr3;
};
cpus {
......
arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi 0 → 100644
View file @ 16e024f3
/*
* QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
raideng: raideng@320000 {
compatible = "fsl,raideng-v1.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x320000 0x10000>;
ranges = <0 0x320000 0x10000>;
raideng_jq0@1000 {
compatible = "fsl,raideng-v1.0-job-queue";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x1000 0x1000>;
ranges = <0x0 0x1000 0x1000>;
raideng_jr0: jr@0 {
compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
reg = <0x0 0x400>;
interrupts = <139 2 0 0>;
interrupt-parent = <&mpic>;
};
raideng_jr1: jr@400 {
compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
reg = <0x400 0x400>;
interrupts = <140 2 0 0>;
interrupt-parent = <&mpic>;
};
};
raideng_jq1@2000 {
compatible = "fsl,raideng-v1.0-job-queue";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2000 0x1000>;
ranges = <0x0 0x2000 0x1000>;
raideng_jr2: jr@0 {
compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
reg = <0x0 0x400>;
interrupts = <141 2 0 0>;
interrupt-parent = <&mpic>;
};
raideng_jr3: jr@400 {
compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
reg = <0x400 0x400>;
interrupts = <142 2 0 0>;
interrupt-parent = <&mpic>;
};
};
};
arch/powerpc/configs/pseries_defconfig
View file @ 16e024f3
......@@ -2,7 +2,7 @@ CONFIG_PPC64=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_NR_CPUS=2048
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......
arch/powerpc/include/asm/bitops.h
View file @ 16e024f3
......@@ -52,8 +52,6 @@
#define smp_mb__before_clear_bit() smp_mb()
#define smp_mb__after_clear_bit() smp_mb()
#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG))
#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG)
#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
/* Macro for generating the ***_bits() functions */
......@@ -83,22 +81,22 @@ DEFINE_BITOP(change_bits, xor, "", "")
static __inline__ void set_bit(int nr, volatile unsigned long *addr)
{
set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
set_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
}
static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
{
clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
}
static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
{
clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr));
clear_bits_unlock(BIT_MASK(nr), addr + BIT_WORD(nr));
}
static __inline__ void change_bit(int nr, volatile unsigned long *addr)
{
change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
change_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
}
/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
......@@ -136,26 +134,26 @@ DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
static __inline__ int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
return test_and_set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
}
static __inline__ int test_and_set_bit_lock(unsigned long nr,
volatile unsigned long *addr)
{
return test_and_set_bits_lock(BITOP_MASK(nr),
addr + BITOP_WORD(nr)) != 0;
return test_and_set_bits_lock(BIT_MASK(nr),
addr + BIT_WORD(nr)) != 0;
}
static __inline__ int test_and_clear_bit(unsigned long nr,
volatile unsigned long *addr)
{
return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
return test_and_clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
}
static __inline__ int test_and_change_bit(unsigned long nr,
volatile unsigned long *addr)
{
return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
return test_and_change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
}
#include <asm-generic/bitops/non-atomic.h>
......@@ -280,61 +278,8 @@ unsigned long __arch_hweight64(__u64 w);
#include <asm-generic/bitops/find.h>
/* Little-endian versions */
#include <asm-generic/bitops/le.h>
static __inline__ int test_bit_le(unsigned long nr,
__const__ void *addr)
{
__const__ unsigned char *tmp = (__const__ unsigned char *) addr;
return (tmp[nr >> 3] >> (nr & 7)) & 1;
}
static inline void set_bit_le(int nr, void *addr)
{
set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline void clear_bit_le(int nr, void *addr)
{
clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline void __set_bit_le(int nr, void *addr)
{
__set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline void __clear_bit_le(int nr, void *addr)
{
__clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline int test_and_set_bit_le(int nr, void *addr)
{
return test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline int test_and_clear_bit_le(int nr, void *addr)
{
return test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline int __test_and_set_bit_le(int nr, void *addr)
{
return __test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
static inline int __test_and_clear_bit_le(int nr, void *addr)
{
return __test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
}
#define find_first_zero_bit_le(addr, size) \
find_next_zero_bit_le((addr), (size), 0)
unsigned long find_next_zero_bit_le(const void *addr,
unsigned long size, unsigned long offset);
unsigned long find_next_bit_le(const void *addr,
unsigned long size, unsigned long offset);
/* Bitmap functions for the ext2 filesystem */
#include <asm-generic/bitops/ext2-atomic-setbit.h>
......
arch/powerpc/include/asm/cputable.h
View file @ 16e024f3
......@@ -401,6 +401,14 @@ extern const char *powerpc_base_platform;
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
#define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_SAO | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
......@@ -421,8 +429,8 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \
CPU_FTR_VSX)
CPU_FTRS_POWER7 | CPU_FTRS_POWER8 | CPU_FTRS_CELL | \
CPU_FTRS_PA6T | CPU_FTR_VSX)
#endif
#else
enum {
......
arch/powerpc/include/asm/dbell.h
View file @ 16e024f3
/*
* Copyright 2009 Freescale Semicondutor, Inc.
* Copyright 2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......
arch/powerpc/include/asm/exception-64s.h
View file @ 16e024f3
......@@ -48,6 +48,35 @@
#define EX_LR 72
#define EX_CFAR 80
#ifdef CONFIG_RELOCATABLE
#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
ld r12,PACAKBASE(r13); /* get high part of &label */ \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
LOAD_HANDLER(r12,label); \
mtlr r12; \
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
li r10,MSR_RI; \
mtmsrd r10,1; /* Set RI (EE=0) */ \
blr;
#else
/* If not relocatable, we can jump directly -- and save messing with LR */
#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \
mfspr r11,SPRN_##h##SRR0; /* save SRR0 */ \
mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \
li r10,MSR_RI; \
mtmsrd r10,1; /* Set RI (EE=0) */ \
b label;
#endif
/*
* As EXCEPTION_PROLOG_PSERIES(), except we've already got relocation on
* so no need to rfid. Save lr in case we're CONFIG_RELOCATABLE, in which
* case EXCEPTION_RELON_PROLOG_PSERIES_1 will be using lr.
*/
#define EXCEPTION_RELON_PROLOG_PSERIES(area, label, h, extra, vec) \
EXCEPTION_PROLOG_1(area, extra, vec); \
EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
/*
* We're short on space and time in the exception prolog, so we can't
* use the normal SET_REG_IMMEDIATE macro. Normally we just need the
......@@ -55,12 +84,29 @@
* word.
*/
#define LOAD_HANDLER(reg, label) \
addi reg,reg,(label)-_stext; /* virt addr of handler ... */
/* Handlers must be within 64K of kbase, which must be 64k aligned */ \
ori reg,reg,(label)-_stext; /* virt addr of handler ... */
/* Exception register prefixes */
#define EXC_HV H
#define EXC_STD
#if defined(CONFIG_RELOCATABLE)
/*
* If we support interrupts with relocation on AND we're a relocatable
* kernel, we need to use LR to get to the 2nd level handler. So, save/restore
* it when required.
*/
#define SAVE_LR(reg, area) mflr reg ; std reg,area+EX_LR(r13)
#define GET_LR(reg, area) ld reg,area+EX_LR(r13)
#define RESTORE_LR(reg, area) ld reg,area+EX_LR(r13) ; mtlr reg
#else
/* ...else LR is unused and in register. */
#define SAVE_LR(reg, area)
#define GET_LR(reg, area) mflr reg
#define RESTORE_LR(reg, area)
#endif
#define __EXCEPTION_PROLOG_1(area, extra, vec) \
GET_PACA(r13); \
std r9,area+EX_R9(r13); /* save r9 - r12 */ \
......@@ -69,6 +115,7 @@
mfspr r10,SPRN_CFAR; \
std r10,area+EX_CFAR(r13); \
END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
SAVE_LR(r10, area); \
mfcr r9; \
extra(vec); \
std r11,area+EX_R11(r13); \
......@@ -169,6 +216,7 @@ do_kvm_##n: \
sth r1,PACA_TRAP_SAVE(r13); \
std r3,area+EX_R3(r13); \
addi r3,r13,area; /* r3 -> where regs are saved*/ \
RESTORE_LR(r1, area); \
b bad_stack; \
3: std r9,_CCR(r1); /* save CR in stackframe */ \
std r11,_NIP(r1); /* save SRR0 in stackframe */ \
......@@ -194,8 +242,8 @@ do_kvm_##n: \
ld r10,area+EX_CFAR(r13); \
std r10,ORIG_GPR3(r1); \
END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
GET_LR(r9,area); /* Get LR, later save to stack */ \
ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
mflr r9; /* save LR in stackframe */ \
std r9,_LINK(r1); \
mfctr r10; /* save CTR in stackframe */ \
std r10,_CTR(r1); \
......@@ -232,6 +280,26 @@ label##_hv: \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
EXC_HV, KVMTEST, vec)
#define STD_RELON_EXCEPTION_PSERIES(loc, vec, label) \
. = loc; \
.globl label##_relon_pSeries; \
label##_relon_pSeries: \
HMT_MEDIUM; \
/* No guest interrupts come through here */ \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
EXC_STD, KVMTEST_PR, vec)
#define STD_RELON_EXCEPTION_HV(loc, vec, label) \
. = loc; \
.globl label##_relon_hv; \
label##_relon_hv: \
HMT_MEDIUM; \
/* No guest interrupts come through here */ \
SET_SCRATCH0(r13); /* save r13 */ \
EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
EXC_HV, KVMTEST, vec)
/* This associate vector numbers with bits in paca->irq_happened */
#define SOFTEN_VALUE_0x500 PACA_IRQ_EE
#define SOFTEN_VALUE_0x502 PACA_IRQ_EE
......@@ -257,6 +325,9 @@ label##_hv: \
KVMTEST(vec); \
_SOFTEN_TEST(EXC_STD, vec)
#define SOFTEN_NOTEST_PR(vec) _SOFTEN_TEST(EXC_STD, vec)
#define SOFTEN_NOTEST_HV(vec) _SOFTEN_TEST(EXC_HV, vec)
#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \
HMT_MEDIUM; \
SET_SCRATCH0(r13); /* save r13 */ \
......@@ -279,6 +350,28 @@ label##_hv: \
_MASKABLE_EXCEPTION_PSERIES(vec, label, \
EXC_HV, SOFTEN_TEST_HV)
#define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \
HMT_MEDIUM; \
SET_SCRATCH0(r13); /* save r13 */ \
__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec); \
EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, h);
#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra) \
__MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)
#define MASKABLE_RELON_EXCEPTION_PSERIES(loc, vec, label) \
. = loc; \
.globl label##_relon_pSeries; \
label##_relon_pSeries: \
_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
EXC_STD, SOFTEN_NOTEST_PR)
#define MASKABLE_RELON_EXCEPTION_HV(loc, vec, label) \
. = loc; \
.globl label##_relon_hv; \
label##_relon_hv: \
_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, \
EXC_HV, SOFTEN_NOTEST_HV)
/*
* Our exception common code can be passed various "additions"
* to specify the behaviour of interrupts, whether to kick the
......
arch/powerpc/include/asm/firmware.h
View file @ 16e024f3
......@@ -49,6 +49,7 @@
#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000)
#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000)
#define FW_FEATURE_OPALv2 ASM_CONST(0x0000000020000000)
#define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000)
#ifndef __ASSEMBLY__
......@@ -62,7 +63,8 @@ enum {
FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
FW_FEATURE_SET_MODE,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
FW_FEATURE_POWERNV_ALWAYS = 0,
......
arch/powerpc/include/asm/fsl_gtm.h
View file @ 16e024f3
/*
* Freescale General-purpose Timers Module
*
* Copyright (c) Freescale Semicondutor, Inc. 2006.
* Copyright 2006 Freescale Semiconductor, Inc.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
......
arch/powerpc/include/asm/fsl_guts.h
View file @ 16e024f3
......@@ -71,7 +71,9 @@ struct ccsr_guts {
u8 res0c4[0x224 - 0xc4];
__be32 iodelay1; /* 0x.0224 - IO delay control register 1 */
__be32 iodelay2; /* 0x.0228 - IO delay control register 2 */
u8 res22c[0x800 - 0x22c];
u8 res22c[0x604 - 0x22c];
__be32 pamubypenr; /* 0x.604 - PAMU bypass enable register */
u8 res608[0x800 - 0x608];
__be32 clkdvdr; /* 0x.0800 - Clock Divide Register */
u8 res804[0x900 - 0x804];
__be32 ircr; /* 0x.0900 - Infrared Control Register */
......
arch/powerpc/include/asm/hvcall.h
View file @ 16e024f3
......@@ -267,7 +267,8 @@
#define H_RANDOM 0x300
#define H_COP 0x304
#define H_GET_MPP_X 0x314
#define MAX_HCALL_OPCODE H_GET_MPP_X
#define H_SET_MODE 0x31C
#define MAX_HCALL_OPCODE H_SET_MODE
#ifndef __ASSEMBLY__
......@@ -355,6 +356,26 @@ struct hvcall_mpp_x_data {
int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
static inline unsigned int get_longbusy_msecs(int longbusy_rc)
{
switch (longbusy_rc) {
case H_LONG_BUSY_ORDER_1_MSEC:
return 1;
case H_LONG_BUSY_ORDER_10_MSEC:
return 10;
case H_LONG_BUSY_ORDER_100_MSEC:
return 100;
case H_LONG_BUSY_ORDER_1_SEC:
return 1000;
case H_LONG_BUSY_ORDER_10_SEC:
return 10000;
case H_LONG_BUSY_ORDER_100_SEC:
return 100000;
default:
return 1;
}
}
#ifdef CONFIG_PPC_PSERIES
extern int CMO_PrPSP;
extern int CMO_SecPSP;
......
arch/powerpc/include/asm/immap_qe.h
View file @ 16e024f3
......@@ -3,7 +3,7 @@
* The Internal Memory Map for devices with QE on them. This
* is the superset of all QE devices (8360, etc.).
* Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/include/asm/machdep.h
View file @ 16e024f3
......@@ -166,9 +166,6 @@ struct machdep_calls {
unsigned long size,
pgprot_t vma_prot);
/* Idle loop for this platform, leave empty for default idle loop */
void (*idle_loop)(void);
/*
* Function for waiting for work with reduced power in idle loop;
* called with interrupts disabled.
......
arch/powerpc/include/asm/mmu.h
View file @ 16e024f3
......@@ -101,6 +101,7 @@
#define MMU_FTRS_POWER5 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_POWER6 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_POWER7 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_POWER8 MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
#define MMU_FTRS_CELL MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
MMU_FTR_CI_LARGE_PAGE
#define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
......
arch/powerpc/include/asm/pSeries_reconfig.h deleted 100644 → 0
View file @ c36e0501
#ifndef _PPC64_PSERIES_RECONFIG_H
#define _PPC64_PSERIES_RECONFIG_H
#ifdef __KERNEL__
#include <linux/notifier.h>
/*
* Use this API if your code needs to know about OF device nodes being
* added or removed on pSeries systems.
*/
#define PSERIES_RECONFIG_ADD 0x0001
#define PSERIES_RECONFIG_REMOVE 0x0002
#define PSERIES_DRCONF_MEM_ADD 0x0003
#define PSERIES_DRCONF_MEM_REMOVE 0x0004
#define PSERIES_UPDATE_PROPERTY 0x0005
/**
* pSeries_reconfig_notify - Notifier value structure for OFDT property updates
*
* @node: Device tree node which owns the property being updated
* @property: Updated property
*/
struct pSeries_reconfig_prop_update {
struct device_node *node;
struct property *property;
};
#ifdef CONFIG_PPC_PSERIES
extern int pSeries_reconfig_notifier_register(struct notifier_block *);
extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
extern int pSeries_reconfig_notify(unsigned long action, void *p);
/* Not the best place to put this, will be fixed when we move some
* of the rtas suspend-me stuff to pseries */
extern void pSeries_coalesce_init(void);
#else /* !CONFIG_PPC_PSERIES */
static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
return 0;
}
static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
static inline void pSeries_coalesce_init(void) { }
#endif /* CONFIG_PPC_PSERIES */
#endif /* __KERNEL__ */
#endif /* _PPC64_PSERIES_RECONFIG_H */
arch/powerpc/include/asm/ppc-opcode.h
View file @ 16e024f3
/*
* Copyright 2009 Freescale Semicondutor, Inc.
* Copyright 2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -86,6 +86,7 @@
#define PPC_INST_DCBA_MASK 0xfc0007fe
#define PPC_INST_DCBAL 0x7c2005ec
#define PPC_INST_DCBZL 0x7c2007ec
#define PPC_INST_ICBT 0x7c00002c
#define PPC_INST_ISEL 0x7c00001e
#define PPC_INST_ISEL_MASK 0xfc00003e
#define PPC_INST_LDARX 0x7c0000a8
......@@ -201,6 +202,7 @@
#define __PPC_MB(s) (((s) & 0x1f) << 6)
#define __PPC_ME(s) (((s) & 0x1f) << 1)
#define __PPC_BI(s) (((s) & 0x1f) << 16)
#define __PPC_CT(t) (((t) & 0x0f) << 21)
/*
* Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a
......@@ -263,6 +265,8 @@
__PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b))
#define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_INST_SLBFEE | \
__PPC_RT(t) | __PPC_RB(b))
#define PPC_ICBT(c,a,b) stringify_in_c(.long PPC_INST_ICBT | \
__PPC_CT(c) | __PPC_RA0(a) | __PPC_RB(b))
/* PASemi instructions */
#define LBZCIX(t,a,b) stringify_in_c(.long PPC_INST_LBZCIX | \
__PPC_RT(t) | __PPC_RA(a) | __PPC_RB(b))
......
arch/powerpc/include/asm/prom.h
View file @ 16e024f3
......@@ -58,6 +58,22 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
extern void of_instantiate_rtc(void);
/* The of_drconf_cell struct defines the layout of the LMB array
* specified in the device tree property
* ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory
*/
struct of_drconf_cell {
u64 base_addr;
u32 drc_index;
u32 reserved;
u32 aa_index;
u32 flags;
};
#define DRCONF_MEM_ASSIGNED 0x00000008
#define DRCONF_MEM_AI_INVALID 0x00000040
#define DRCONF_MEM_RESERVED 0x00000080
/* These includes are put at the bottom because they may contain things
* that are overridden by this file. Ideally they shouldn't be included
* by this file, but there are a bunch of .c files that currently depend
......
arch/powerpc/include/asm/qe.h
View file @ 16e024f3
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/include/asm/qe_ic.h
View file @ 16e024f3
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/include/asm/reg.h
View file @ 16e024f3
......@@ -249,6 +249,8 @@
#define LPCR_RMLS 0x1C000000 /* impl dependent rmo limit sel */
#define LPCR_RMLS_SH (63-37)
#define LPCR_ILE 0x02000000 /* !HV irqs set MSR:LE */
#define LPCR_AIL_0 0x00000000 /* MMU off exception offset 0x0 */
#define LPCR_AIL_3 0x01800000 /* MMU on exception offset 0xc00...4xxx */
#define LPCR_PECE 0x00007000 /* powersave exit cause enable */
#define LPCR_PECE0 0x00004000 /* ext. exceptions can cause exit */
#define LPCR_PECE1 0x00002000 /* decrementer can cause exit */
......@@ -1030,6 +1032,7 @@
#define PVR_970MP 0x0044
#define PVR_970GX 0x0045
#define PVR_POWER7p 0x004A
#define PVR_POWER8 0x004B
#define PVR_BE 0x0070
#define PVR_PA6T 0x0090
......
arch/powerpc/include/asm/rtas.h
View file @ 16e024f3
......@@ -353,8 +353,13 @@ static inline int page_is_rtas_user_buf(unsigned long pfn)
return 1;
return 0;
}
/* Not the best place to put pSeries_coalesce_init, will be fixed when we
* move some of the rtas suspend-me stuff to pseries */
extern void pSeries_coalesce_init(void);
#else
static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
static inline void pSeries_coalesce_init(void) { }
#endif
extern int call_rtas(const char *, int, int, unsigned long *, ...);
......
arch/powerpc/include/asm/setup.h 0 → 100644
View file @ 16e024f3
#ifndef _ASM_POWERPC_SETUP_H
#define _ASM_POWERPC_SETUP_H
#include <uapi/asm/setup.h>
#ifndef __ASSEMBLY__
extern void ppc_printk_progress(char *s, unsigned short hex);
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
extern int init_bootmem_done; /* set once bootmem is available */
extern unsigned long long memory_limit;
extern unsigned long klimit;
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
struct device_node;
extern void note_scsi_host(struct device_node *, void *);
/* Used in very early kernel initialization. */
extern unsigned long reloc_offset(void);
extern unsigned long add_reloc_offset(unsigned long);
extern void reloc_got2(unsigned long);
#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x)))
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_SETUP_H */
arch/powerpc/include/asm/ucc.h
View file @ 16e024f3
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/include/asm/ucc_fast.h
View file @ 16e024f3
/*
* Internal header file for UCC FAST unit routines.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/include/asm/ucc_slow.h
View file @ 16e024f3
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/include/asm/udbg.h
View file @ 16e024f3
......@@ -21,7 +21,6 @@ extern int (*udbg_getc_poll)(void);
extern void udbg_puts(const char *s);
extern int udbg_write(const char *s, int n);
extern int udbg_read(char *buf, int buflen);
extern void register_early_udbg_console(void);
extern void udbg_printf(const char *fmt, ...)
......
arch/powerpc/include/uapi/asm/setup.h
View file @ 16e024f3
#ifndef _ASM_POWERPC_SETUP_H
#define _ASM_POWERPC_SETUP_H
#include <asm-generic/setup.h>
#ifndef __ASSEMBLY__
extern void ppc_printk_progress(char *s, unsigned short hex);
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
extern int init_bootmem_done; /* set once bootmem is available */
extern unsigned long long memory_limit;
extern unsigned long klimit;
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
extern void via_cuda_init(void);
extern void read_rtc_time(void);
extern void pmac_find_display(void);
struct device_node;
extern void note_scsi_host(struct device_node *, void *);
/* Used in very early kernel initialization. */
extern unsigned long reloc_offset(void);
extern unsigned long add_reloc_offset(unsigned long);
extern void reloc_got2(unsigned long);
#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x)))
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_SETUP_H */
arch/powerpc/kernel/Makefile
View file @ 16e024f3
......@@ -38,7 +38,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power7.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
......
arch/powerpc/kernel/cpu_setup_power7.S → arch/powerpc/kernel/cpu_setup_power.S
View file @ 16e024f3
......@@ -27,6 +27,7 @@ _GLOBAL(__setup_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
bl __init_LPCR
bl __init_TLB
mtlr r11
......@@ -39,6 +40,35 @@ _GLOBAL(__restore_cpu_power7)
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
bl __init_LPCR
bl __init_TLB
mtlr r11
blr
_GLOBAL(__setup_cpu_power8)
mflr r11
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
bl __init_TLB
mtlr r11
blr
_GLOBAL(__restore_cpu_power8)
mflr r11
mfmsr r3
rldicl. r0,r3,4,63
beqlr
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
bl __init_TLB
mtlr r11
......@@ -57,6 +87,7 @@ __init_hvmode_206:
__init_LPCR:
/* Setup a sane LPCR:
* Called with initial LPCR in R3
*
* LPES = 0b01 (HSRR0/1 used for 0x500)
* PECE = 0b111
......@@ -67,7 +98,6 @@ __init_LPCR:
*
* Other bits untouched for now
*/
mfspr r3,SPRN_LPCR
li r5,1
rldimi r3,r5, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
......
arch/powerpc/kernel/cputable.c
View file @ 16e024f3
......@@ -68,6 +68,8 @@ extern void __restore_cpu_pa6t(void);
extern void __restore_cpu_ppc970(void);
extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power7(void);
extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_power8(void);
extern void __restore_cpu_a2(void);
#endif /* CONFIG_PPC64 */
#if defined(CONFIG_E500)
......@@ -94,6 +96,10 @@ extern void __restore_cpu_e5500(void);
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_PSERIES_PERFMON_COMPAT)
#define COMMON_USER_POWER8 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_PSERIES_PERFMON_COMPAT)
#define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_HAS_ALTIVEC_COMP)
......@@ -429,6 +435,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7",
},
{ /* 2.07-compliant processor, i.e. Power8 "architected" mode */
.pvr_mask = 0xffffffff,
.pvr_value = 0x0f000004,
.cpu_name = "POWER8 (architected)",
.cpu_features = CPU_FTRS_POWER8,
.cpu_user_features = COMMON_USER_POWER8,
.mmu_features = MMU_FTRS_POWER8,
.icache_bsize = 128,
.dcache_bsize = 128,
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_cpu_type = "ppc64/ibm-compat-v1",
.cpu_setup = __setup_cpu_power8,
.cpu_restore = __restore_cpu_power8,
.platform = "power8",
},
{ /* Power7 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003f0000,
......@@ -463,6 +484,23 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_restore = __restore_cpu_power7,
.platform = "power7+",
},
{ /* Power8 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x004b0000,
.cpu_name = "POWER8 (raw)",
.cpu_features = CPU_FTRS_POWER8,
.cpu_user_features = COMMON_USER_POWER8,
.mmu_features = MMU_FTRS_POWER8,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power8",
.oprofile_type = PPC_OPROFILE_POWER4,
.cpu_setup = __setup_cpu_power8,
.cpu_restore = __restore_cpu_power8,
.platform = "power8",
},
{ /* Cell Broadband Engine */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,
......
arch/powerpc/kernel/entry_64.S
View file @ 16e024f3
......@@ -373,6 +373,8 @@ _GLOBAL(ret_from_fork)
_GLOBAL(ret_from_kernel_thread)
bl .schedule_tail
REST_NVGPRS(r1)
li r3,0
std r3,0(r1)
ld r14, 0(r14)
mtlr r14
mr r3,r15
......
arch/powerpc/kernel/exceptions-64s.S
View file @ 16e024f3
This diff is collapsed.
arch/powerpc/kernel/head_64.S
View file @ 16e024f3
......@@ -422,7 +422,7 @@ _STATIC(__after_prom_start)
tovirt(r6,r6) /* on booke, we already run at PAGE_OFFSET */
#endif
#ifdef CONFIG_CRASH_DUMP
#ifdef CONFIG_RELOCATABLE
/*
* Check if the kernel has to be running as relocatable kernel based on the
* variable __run_at_load, if it is set the kernel is treated as relocatable
......@@ -432,7 +432,8 @@ _STATIC(__after_prom_start)
cmplwi cr0,r7,1
bne 3f
li r5,__end_interrupts - _stext /* just copy interrupts */
/* just copy interrupts */
LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
b 5f
3:
#endif
......@@ -703,6 +704,7 @@ _INIT_STATIC(start_here_multiplatform)
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL
/* Setup OPAL entry */
LOAD_REG_ADDR(r11, opal)
std r28,0(r11);
std r29,8(r11);
#endif
......
arch/powerpc/kernel/idle.c
View file @ 16e024f3
......@@ -55,9 +55,6 @@ __setup("powersave=off", powersave_off);
*/
void cpu_idle(void)
{
if (ppc_md.idle_loop)
ppc_md.idle_loop(); /* doesn't return */
set_thread_flag(TIF_POLLING_NRFLAG);
while (1) {
tick_nohz_idle_enter();
......
arch/powerpc/kernel/iommu.c
View file @ 16e024f3
......@@ -656,7 +656,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
struct iommu_pool *p;
/* number of bytes needed for the bitmap */
sz = (tbl->it_size + 7) >> 3;
sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
if (!page)
......@@ -708,7 +708,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
void iommu_free_table(struct iommu_table *tbl, const char *node_name)
{
unsigned long bitmap_sz, i;
unsigned long bitmap_sz;
unsigned int order;
if (!tbl || !tbl->it_map) {
......@@ -718,17 +718,11 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
}
/* verify that table contains no entries */
/* it_size is in entries, and we're examining 64 at a time */
for (i = 0; i < (tbl->it_size/64); i++) {
if (tbl->it_map[i] != 0) {
printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
__func__, node_name);
break;
}
}
if (!bitmap_empty(tbl->it_map, tbl->it_size))
pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name);
/* calculate bitmap size in bytes */
bitmap_sz = (tbl->it_size + 7) / 8;
bitmap_sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
/* free bitmap */
order = get_order(bitmap_sz);
......
arch/powerpc/kernel/machine_kexec.c
View file @ 16e024f3
......@@ -218,23 +218,23 @@ static void __init export_crashk_values(struct device_node *node)
* be sure what's in them, so remove them. */
prop = of_find_property(node, "linux,crashkernel-base", NULL);
if (prop)
prom_remove_property(node, prop);
of_remove_property(node, prop);
prop = of_find_property(node, "linux,crashkernel-size", NULL);
if (prop)
prom_remove_property(node, prop);
of_remove_property(node, prop);
if (crashk_res.start != 0) {
prom_add_property(node, &crashk_base_prop);
of_add_property(node, &crashk_base_prop);
crashk_size = resource_size(&crashk_res);
prom_add_property(node, &crashk_size_prop);
of_add_property(node, &crashk_size_prop);
}
/*
* memory_limit is required by the kexec-tools to limit the
* crash regions to the actual memory used.
*/
prom_update_property(node, &memory_limit_prop);
of_update_property(node, &memory_limit_prop);
}
static int __init kexec_setup(void)
......@@ -249,11 +249,11 @@ static int __init kexec_setup(void)
/* remove any stale properties so ours can be found */
prop = of_find_property(node, kernel_end_prop.name, NULL);
if (prop)
prom_remove_property(node, prop);
of_remove_property(node, prop);
/* information needed by userspace when using default_machine_kexec */
kernel_end = __pa(_end);
prom_add_property(node, &kernel_end_prop);
of_add_property(node, &kernel_end_prop);
export_crashk_values(node);
......
arch/powerpc/kernel/machine_kexec_64.c
View file @ 16e024f3
......@@ -389,14 +389,14 @@ static int __init export_htab_values(void)
/* remove any stale propertys so ours can be found */
prop = of_find_property(node, htab_base_prop.name, NULL);
if (prop)
prom_remove_property(node, prop);
of_remove_property(node, prop);
prop = of_find_property(node, htab_size_prop.name, NULL);
if (prop)
prom_remove_property(node, prop);
of_remove_property(node, prop);
htab_base = __pa(htab_address);
prom_add_property(node, &htab_base_prop);
prom_add_property(node, &htab_size_prop);
of_add_property(node, &htab_base_prop);
of_add_property(node, &htab_size_prop);
of_node_put(node);
return 0;
......
arch/powerpc/kernel/pci_32.c
View file @ 16e024f3
......@@ -208,7 +208,7 @@ pci_create_OF_bus_map(void)
of_prop->name = "pci-OF-bus-map";
of_prop->length = 256;
of_prop->value = &of_prop[1];
prom_add_property(dn, of_prop);
of_add_property(dn, of_prop);
of_node_put(dn);
}
}
......
arch/powerpc/kernel/prom.c
View file @ 16e024f3
......@@ -32,6 +32,7 @@
#include <linux/debugfs.h>
#include <linux/irq.h>
#include <linux/memblock.h>
#include <linux/of.h>
#include <asm/prom.h>
#include <asm/rtas.h>
......@@ -49,11 +50,11 @@
#include <asm/btext.h>
#include <asm/sections.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
#include <asm/kexec.h>
#include <asm/opal.h>
#include <asm/fadump.h>
#include <asm/debug.h>
#include <mm/mmu_decl.h>
......@@ -802,7 +803,7 @@ static int prom_reconfig_notifier(struct notifier_block *nb,
int err;
switch (action) {
case PSERIES_RECONFIG_ADD:
case OF_RECONFIG_ATTACH_NODE:
err = of_finish_dynamic_node(node);
if (err < 0)
printk(KERN_ERR "finish_node returned %d\n", err);
......@@ -821,7 +822,7 @@ static struct notifier_block prom_reconfig_nb = {
static int __init prom_reconfig_setup(void)
{
return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
return of_reconfig_notifier_register(&prom_reconfig_nb);
}
__initcall(prom_reconfig_setup);
#endif
......
arch/powerpc/kernel/prom_init.c
View file @ 16e024f3
......@@ -671,6 +671,7 @@ static void __init early_cmdline_parse(void)
#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */
#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */
#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */
#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */
/* Option vector 2: Open Firmware options supported */
#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */
......@@ -707,6 +708,7 @@ static void __init early_cmdline_parse(void)
#define OV5_PFO_HW_RNG 0x80 /* PFO Random Number Generator */
#define OV5_PFO_HW_842 0x40 /* PFO Compression Accelerator */
#define OV5_PFO_HW_ENCR 0x20 /* PFO Encryption Accelerator */
#define OV5_SUB_PROCESSORS 0x01 /* 1,2,or 4 Sub-Processors supported */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
......@@ -719,6 +721,8 @@ static unsigned char ibm_architecture_vec[] = {
W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
W(0xffff0000), W(0x004b0000), /* POWER8 */
W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */
W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
......@@ -728,7 +732,7 @@ static unsigned char ibm_architecture_vec[] = {
3 - 2, /* length */
0, /* don't ignore, don't halt */
OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
/* option vector 2: Open Firmware options supported */
34 - 2, /* length */
......@@ -755,7 +759,7 @@ static unsigned char ibm_architecture_vec[] = {
OV4_MIN_ENT_CAP, /* minimum VP entitled capacity */
/* option vector 5: PAPR/OF options */
18 - 2, /* length */
19 - 2, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
......@@ -769,13 +773,14 @@ static unsigned char ibm_architecture_vec[] = {
* must match by the macro below. Update the definition if
* the structure layout changes.
*/
#define IBM_ARCH_VEC_NRCORES_OFFSET 101
#define IBM_ARCH_VEC_NRCORES_OFFSET 117
W(NR_CPUS), /* number of cores supported */
0,
0,
0,
0,
OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR | OV5_PFO_HW_842,
OV5_SUB_PROCESSORS,
/* option vector 6: IBM PAPR hints */
4 - 2, /* length */
0,
......
arch/powerpc/kernel/ptrace.c
View file @ 16e024f3
......@@ -952,6 +952,10 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
arch_bp_generic_fields(data &
(DABR_DATA_WRITE | DABR_DATA_READ),
&attr.bp_type);
/* Enable breakpoint */
attr.disabled = false;
ret = modify_user_hw_breakpoint(bp, &attr);
if (ret) {
ptrace_put_breakpoints(task);
......@@ -1037,7 +1041,7 @@ void ptrace_disable(struct task_struct *child)
}
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
static long set_intruction_bp(struct task_struct *child,
static long set_instruction_bp(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
int slot;
......@@ -1338,6 +1342,12 @@ static int set_dac_range(struct task_struct *child,
static long ppc_set_hwdebug(struct task_struct *child,
struct ppc_hw_breakpoint *bp_info)
{
#ifdef CONFIG_HAVE_HW_BREAKPOINT
int len = 0;
struct thread_struct *thread = &(child->thread);
struct perf_event *bp;
struct perf_event_attr attr;
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifndef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long dabr;
#endif
......@@ -1365,7 +1375,7 @@ static long ppc_set_hwdebug(struct task_struct *child,
if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) ||
(bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE))
return -EINVAL;
return set_intruction_bp(child, bp_info);
return set_instruction_bp(child, bp_info);
}
if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT)
return set_dac(child, bp_info);
......@@ -1381,13 +1391,9 @@ static long ppc_set_hwdebug(struct task_struct *child,
*/
if ((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0 ||
(bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0 ||
bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT ||
bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)
return -EINVAL;
if (child->thread.dabr)
return -ENOSPC;
if ((unsigned long)bp_info->addr >= TASK_SIZE)
return -EIO;
......@@ -1397,6 +1403,50 @@ static long ppc_set_hwdebug(struct task_struct *child,
dabr |= DABR_DATA_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
dabr |= DABR_DATA_WRITE;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
if (ptrace_get_breakpoints(child) < 0)
return -ESRCH;
/*
* Check if the request is for 'range' breakpoints. We can
* support it if range < 8 bytes.
*/
if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) {
len = bp_info->addr2 - bp_info->addr;
} else if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) {
ptrace_put_breakpoints(child);
return -EINVAL;
}
bp = thread->ptrace_bps[0];
if (bp) {
ptrace_put_breakpoints(child);
return -ENOSPC;
}
/* Create a new breakpoint request if one doesn't exist already */
hw_breakpoint_init(&attr);
attr.bp_addr = (unsigned long)bp_info->addr & ~HW_BREAKPOINT_ALIGN;
attr.bp_len = len;
arch_bp_generic_fields(dabr & (DABR_DATA_WRITE | DABR_DATA_READ),
&attr.bp_type);
thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
ptrace_triggered, NULL, child);
if (IS_ERR(bp)) {
thread->ptrace_bps[0] = NULL;
ptrace_put_breakpoints(child);
return PTR_ERR(bp);
}
ptrace_put_breakpoints(child);
return 1;
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT)
return -EINVAL;
if (child->thread.dabr)
return -ENOSPC;
child->thread.dabr = dabr;
child->thread.dabrx = DABRX_ALL;
......@@ -1405,8 +1455,13 @@ static long ppc_set_hwdebug(struct task_struct *child,
#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */
}
static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
static long ppc_del_hwdebug(struct task_struct *child, long data)
{
#ifdef CONFIG_HAVE_HW_BREAKPOINT
int ret = 0;
struct thread_struct *thread = &(child->thread);
struct perf_event *bp;
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
int rc;
......@@ -1426,10 +1481,25 @@ static long ppc_del_hwdebug(struct task_struct *child, long addr, long data)
#else
if (data != 1)
return -EINVAL;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
if (ptrace_get_breakpoints(child) < 0)
return -ESRCH;
bp = thread->ptrace_bps[0];
if (bp) {
unregister_hw_breakpoint(bp);
thread->ptrace_bps[0] = NULL;
} else
ret = -ENOENT;
ptrace_put_breakpoints(child);
return ret;
#else /* CONFIG_HAVE_HW_BREAKPOINT */
if (child->thread.dabr == 0)
return -ENOENT;
child->thread.dabr = 0;
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
return 0;
#endif
......@@ -1536,7 +1606,11 @@ long arch_ptrace(struct task_struct *child, long request,
dbginfo.data_bp_alignment = 4;
#endif
dbginfo.sizeof_condition = 0;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
dbginfo.features = PPC_DEBUG_FEATURE_DATA_BP_RANGE;
#else
dbginfo.features = 0;
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
if (!access_ok(VERIFY_WRITE, datavp,
......@@ -1563,7 +1637,7 @@ long arch_ptrace(struct task_struct *child, long request,
}
case PPC_PTRACE_DELHWDEBUG: {
ret = ppc_del_hwdebug(child, addr, data);
ret = ppc_del_hwdebug(child, data);
break;
}
......
arch/powerpc/kernel/rtas.c
View file @ 16e024f3
......@@ -42,7 +42,6 @@
#include <asm/time.h>
#include <asm/mmu.h>
#include <asm/topology.h>
#include <asm/pSeries_reconfig.h>
struct rtas_t rtas = {
.lock = __ARCH_SPIN_LOCK_UNLOCKED
......
arch/powerpc/kernel/rtas_flash.c
View file @ 16e024f3
......@@ -650,10 +650,8 @@ static int initialize_flash_pde_data(const char *rtas_call_name,
int token;
dp->data = kzalloc(buf_size, GFP_KERNEL);
if (dp->data == NULL) {
remove_flash_pde(dp);
if (dp->data == NULL)
return -ENOMEM;
}
/*
* This code assumes that the status int is the first member of the
......
arch/powerpc/kernel/setup_64.c
View file @ 16e024f3
......@@ -601,6 +601,11 @@ void __init setup_arch(char **cmdline_p)
kvm_linear_init();
/* Interrupt code needs to be 64K-aligned */
if ((unsigned long)_stext & 0xffff)
panic("Kernelbase not 64K-aligned (0x%lx)!\n",
(unsigned long)_stext);
ppc64_boot_msg(0x15, "Setup Done");
}
......
arch/powerpc/kernel/udbg.c
View file @ 16e024f3
......@@ -122,29 +122,6 @@ int udbg_write(const char *s, int n)
return n - remain;
}
int udbg_read(char *buf, int buflen)
{
char *p = buf;
int i, c;
if (!udbg_getc)
return 0;
for (i = 0; i < buflen; ++i) {
do {
c = udbg_getc();
if (c == -1 && i == 0)
return -1;
} while (c == 0x11 || c == 0x13);
if (c == 0 || c == -1)
break;
*p++ = c;
}
return i;
}
#define UDBG_BUFSIZE 256
void udbg_printf(const char *fmt, ...)
{
......
arch/powerpc/mm/numa.c
View file @ 16e024f3
......@@ -399,18 +399,6 @@ static unsigned long read_n_cells(int n, const unsigned int **buf)
return result;
}
struct of_drconf_cell {
u64 base_addr;
u32 drc_index;
u32 reserved;
u32 aa_index;
u32 flags;
};
#define DRCONF_MEM_ASSIGNED 0x00000008
#define DRCONF_MEM_AI_INVALID 0x00000040
#define DRCONF_MEM_RESERVED 0x00000080
/*
* Read the next memblock list entry from the ibm,dynamic-memory property
* and return the information in the provided of_drconf_cell structure.
......
arch/powerpc/mm/tlb_nohash_low.S
View file @ 16e024f3
......@@ -190,12 +190,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
#ifdef CONFIG_PPC_47x
/*
* 47x variant of icbt
*/
# define ICBT(CT,RA,RB) \
.long 0x7c00002c | ((CT) << 21) | ((RA) << 16) | ((RB) << 11)
/*
* _tlbivax_bcast is only on 47x. We don't bother doing a runtime
* check though, it will blow up soon enough if we mistakenly try
......@@ -208,8 +202,7 @@ _GLOBAL(_tlbivax_bcast)
wrteei 0
mtspr SPRN_MMUCR,r5
isync
/* tlbivax 0,r3 - use .long to avoid binutils deps */
.long 0x7c000624 | (r3 << 11)
PPC_TLBIVAX(0, R3)
isync
eieio
tlbsync
......@@ -227,11 +220,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_476_DD2)
bl 2f
2: mflr r6
li r7,32
ICBT(0,r6,r7) /* touch next cache line */
PPC_ICBT(0,R6,R7) /* touch next cache line */
add r6,r6,r7
ICBT(0,r6,r7) /* touch next cache line */
PPC_ICBT(0,R6,R7) /* touch next cache line */
add r6,r6,r7
ICBT(0,r6,r7) /* touch next cache line */
PPC_ICBT(0,R6,R7) /* touch next cache line */
sync
nop
nop
......
arch/powerpc/perf/power7-pmu.c
View file @ 16e024f3
......@@ -54,8 +54,10 @@
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
* [ ><><><><><><>
* NC P6P5P4P3P2P1
* < >< ><><><><><><>
* L2 NC P6P5P4P3P2P1
*
* L2 - 16-18 - Required L2SEL value (select field)
*
* NC - number of counters
* 15: NC error 0x8000
......@@ -72,7 +74,7 @@
static int power7_get_constraint(u64 event, unsigned long *maskp,
unsigned long *valp)
{
int pmc, sh;
int pmc, sh, unit;
unsigned long mask = 0, value = 0;
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
......@@ -90,6 +92,15 @@ static int power7_get_constraint(u64 event, unsigned long *maskp,
mask |= 0x8000;
value |= 0x1000;
}
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
if (unit == 6) {
/* L2SEL must be identical across events */
int l2sel = (event >> PM_L2SEL_SH) & PM_L2SEL_MSK;
mask |= 0x7 << 16;
value |= l2sel << 16;
}
*maskp = mask;
*valp = value;
return 0;
......
arch/powerpc/platforms/512x/Kconfig
View file @ 16e024f3
......@@ -2,7 +2,6 @@ config PPC_MPC512x
bool "512x-based boards"
depends on 6xx
select FSL_SOC
select FB_FSL_DIU
select IPIC
select PPC_CLOCK
select PPC_PCI_CHOICE
......
arch/powerpc/platforms/512x/mpc5121_ads.c
View file @ 16e024f3
......@@ -42,7 +42,10 @@ static void __init mpc5121_ads_setup_arch(void)
for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
mpc83xx_add_bridge(np);
#endif
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
mpc512x_setup_diu();
#endif
}
static void __init mpc5121_ads_init_IRQ(void)
......
arch/powerpc/platforms/512x/mpc512x.h
View file @ 16e024f3
......@@ -16,6 +16,13 @@ extern void __init mpc512x_init(void);
extern int __init mpc5121_clk_init(void);
void __init mpc512x_declare_of_platform_devices(void);
extern void mpc512x_restart(char *cmd);
extern void mpc512x_init_diu(void);
extern void mpc512x_setup_diu(void);
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
void mpc512x_init_diu(void);
void mpc512x_setup_diu(void);
#else
#define mpc512x_init_diu NULL
#define mpc512x_setup_diu NULL
#endif
#endif /* __MPC512X_H__ */
arch/powerpc/platforms/512x/mpc512x_shared.c
View file @ 16e024f3
......@@ -58,6 +58,8 @@ void mpc512x_restart(char *cmd)
;
}
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
struct fsl_diu_shared_fb {
u8 gamma[0x300]; /* 32-bit aligned! */
struct diu_ad ad0; /* 32-bit aligned! */
......@@ -66,25 +68,6 @@ struct fsl_diu_shared_fb {
bool in_use;
};
u32 mpc512x_get_pixel_format(enum fsl_diu_monitor_port port,
unsigned int bits_per_pixel)
{
switch (bits_per_pixel) {
case 32:
return 0x88883316;
case 24:
return 0x88082219;
case 16:
return 0x65053118;
}
return 0x00000400;
}
void mpc512x_set_gamma_table(enum fsl_diu_monitor_port port,
char *gamma_table_base)
{
}
void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port)
{
}
......@@ -320,14 +303,14 @@ void __init mpc512x_setup_diu(void)
}
}
diu_ops.get_pixel_format = mpc512x_get_pixel_format;
diu_ops.set_gamma_table = mpc512x_set_gamma_table;
diu_ops.set_monitor_port = mpc512x_set_monitor_port;
diu_ops.set_pixel_clock = mpc512x_set_pixel_clock;
diu_ops.valid_monitor_port = mpc512x_valid_monitor_port;
diu_ops.release_bootmem = mpc512x_release_bootmem;
}
#endif
void __init mpc512x_init_IRQ(void)
{
struct device_node *np;
......
arch/powerpc/platforms/52xx/lite5200.c
View file @ 16e024f3
......@@ -4,7 +4,7 @@
* Written by: Grant Likely <grant.likely@secretlab.ca>
*
* Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Description:
* This program is free software; you can redistribute it and/or modify it
......
arch/powerpc/platforms/52xx/mpc5200_simple.c
View file @ 16e024f3
......@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static const char *board[] __initdata = {
"anonymous,a3m071",
"anonymous,a4m072",
"anon,charon",
"ifm,o2d",
......
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
View file @ 16e024f3
......@@ -578,18 +578,4 @@ static struct platform_driver mpc52xx_lpbfifo_driver = {
.probe = mpc52xx_lpbfifo_probe,
.remove = __devexit_p(mpc52xx_lpbfifo_remove),
};
/***********************************************************************
* Module init/exit
*/
static int __init mpc52xx_lpbfifo_init(void)
{
return platform_driver_register(&mpc52xx_lpbfifo_driver);
}
module_init(mpc52xx_lpbfifo_init);
static void __exit mpc52xx_lpbfifo_exit(void)
{
platform_driver_unregister(&mpc52xx_lpbfifo_driver);
}
module_exit(mpc52xx_lpbfifo_exit);
module_platform_driver(mpc52xx_lpbfifo_driver);
arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
View file @ 16e024f3
......@@ -16,7 +16,6 @@
#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/bootmem.h>
#include <linux/slab.h>
#include <asm/io.h>
......@@ -149,7 +148,7 @@ int __init pq2ads_pci_init_irq(void)
priv->regs = of_iomap(np, 0);
if (!priv->regs) {
printk(KERN_ERR "Cannot map PCI PIC registers.\n");
goto out_free_bootmem;
goto out_free_kmalloc;
}
/* mask all PCI interrupts */
......@@ -171,9 +170,8 @@ int __init pq2ads_pci_init_irq(void)
out_unmap_regs:
iounmap(priv->regs);
out_free_bootmem:
free_bootmem((unsigned long)priv,
sizeof(struct pq2ads_pci_pic));
out_free_kmalloc:
kfree(priv);
of_node_put(np);
out_unmap_irq:
irq_dispose_mapping(irq);
......
arch/powerpc/platforms/83xx/mpc832x_mds.c
View file @ 16e024f3
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Description:
* MPC832xE MDS board specific routines.
......
arch/powerpc/platforms/83xx/mpc836x_mds.c
View file @ 16e024f3
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
......
arch/powerpc/platforms/83xx/mpc836x_rdk.c
View file @ 16e024f3
/*
* MPC8360E-RDK board file.
*
* Copyright (c) 2006 Freescale Semicondutor, Inc.
* Copyright (c) 2006 Freescale Semiconductor, Inc.
* Copyright (c) 2007-2008 MontaVista Software, Inc.
*
* Author: Anton Vorontsov <avorontsov@ru.mvista.com>
......
arch/powerpc/platforms/83xx/mpc837x_rdb.c
View file @ 16e024f3
/*
* arch/powerpc/platforms/83xx/mpc837x_rdb.c
*
* Copyright (C) 2007 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
*
* MPC837x RDB board specific routines
*
......
arch/powerpc/platforms/85xx/mpc85xx_mds.c
View file @ 16e024f3
/*
* Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc.
* Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc.
* All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
......
arch/powerpc/platforms/85xx/p1022_ds.c
View file @ 16e024f3
......@@ -249,7 +249,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
goto exit;
}
iprop = of_get_property(law_node, "fsl,num-laws", 0);
iprop = of_get_property(law_node, "fsl,num-laws", NULL);
if (!iprop) {
pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
goto exit;
......@@ -539,7 +539,7 @@ static void __init p1022_ds_setup_arch(void)
};
/*
* prom_update_property() is called before
* of_update_property() is called before
* kmalloc() is available, so the 'new' object
* should be allocated in the global area.
* The easiest way is to do that is to
......@@ -548,7 +548,7 @@ static void __init p1022_ds_setup_arch(void)
*/
pr_info("p1022ds: disabling %s node",
np2->full_name);
prom_update_property(np2, &nor_status);
of_update_property(np2, &nor_status);
of_node_put(np2);
}
......@@ -564,7 +564,7 @@ static void __init p1022_ds_setup_arch(void)
pr_info("p1022ds: disabling %s node",
np2->full_name);
prom_update_property(np2, &nand_status);
of_update_property(np2, &nand_status);
of_node_put(np2);
}
......
arch/powerpc/platforms/85xx/smp.c
View file @ 16e024f3
......@@ -128,6 +128,19 @@ static void __cpuinit smp_85xx_mach_cpu_die(void)
}
#endif
static inline void flush_spin_table(void *spin_table)
{
flush_dcache_range((ulong)spin_table,
(ulong)spin_table + sizeof(struct epapr_spin_table));
}
static inline u32 read_spin_table_addr_l(void *spin_table)
{
flush_dcache_range((ulong)spin_table,
(ulong)spin_table + sizeof(struct epapr_spin_table));
return in_be32(&((struct epapr_spin_table *)spin_table)->addr_l);
}
static int __cpuinit smp_85xx_kick_cpu(int nr)
{
unsigned long flags;
......@@ -161,8 +174,8 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
/* Map the spin table */
if (ioremappable)
spin_table = ioremap(*cpu_rel_addr,
sizeof(struct epapr_spin_table));
spin_table = ioremap_prot(*cpu_rel_addr,
sizeof(struct epapr_spin_table), _PAGE_COHERENT);
else
spin_table = phys_to_virt(*cpu_rel_addr);
......@@ -173,7 +186,16 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
generic_set_cpu_up(nr);
if (system_state == SYSTEM_RUNNING) {
/*
* To keep it compatible with old boot program which uses
* cache-inhibit spin table, we need to flush the cache
* before accessing spin table to invalidate any staled data.
* We also need to flush the cache after writing to spin
* table to push data out.
*/
flush_spin_table(spin_table);
out_be32(&spin_table->addr_l, 0);
flush_spin_table(spin_table);
/*
* We don't set the BPTR register here since it already points
......@@ -181,9 +203,14 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
*/
mpic_reset_core(hw_cpu);
/* wait until core is ready... */
if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
10000, 100)) {
/*
* wait until core is ready...
* We need to invalidate the stale data, in case the boot
* loader uses a cache-inhibited spin table.
*/
if (!spin_event_timeout(
read_spin_table_addr_l(spin_table) == 1,
10000, 100)) {
pr_err("%s: timeout waiting for core %d to reset\n",
__func__, hw_cpu);
ret = -ENOENT;
......@@ -194,12 +221,10 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
__secondary_hold_acknowledge = -1;
}
#endif
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be32(&spin_table->addr_l, __pa(__early_start));
if (!ioremappable)
flush_dcache_range((ulong)spin_table,
(ulong)spin_table + sizeof(struct epapr_spin_table));
flush_spin_table(spin_table);
/* Wait a bit for the CPU to ack. */
if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
......@@ -213,13 +238,11 @@ static int __cpuinit smp_85xx_kick_cpu(int nr)
#else
smp_generic_kick_cpu(nr);
flush_spin_table(spin_table);
out_be32(&spin_table->pir, hw_cpu);
out_be64((u64 *)(&spin_table->addr_h),
__pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
if (!ioremappable)
flush_dcache_range((ulong)spin_table,
(ulong)spin_table + sizeof(struct epapr_spin_table));
flush_spin_table(spin_table);
#endif
local_irq_restore(flags);
......
arch/powerpc/platforms/86xx/mpc8610_hpcd.c
View file @ 16e024f3
......@@ -353,5 +353,7 @@ define_machine(mpc86xx_hpcd) {
.time_init = mpc86xx_time_init,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
arch/powerpc/platforms/powermac/cpufreq_32.c
View file @ 16e024f3
......@@ -55,6 +55,7 @@ static unsigned int low_freq;
static unsigned int hi_freq;
static unsigned int cur_freq;
static unsigned int sleep_freq;
static unsigned long transition_latency;
/*
* Different models uses different mechanisms to switch the frequency
......@@ -403,7 +404,7 @@ static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
if (policy->cpu != 0)
return -ENODEV;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cpuinfo.transition_latency = transition_latency;
policy->cur = cur_freq;
cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
......@@ -658,12 +659,14 @@ static int __init pmac_cpufreq_setup(void)
if (!value)
goto out;
cur_freq = (*value) / 1000;
transition_latency = CPUFREQ_ETERNAL;
/* Check for 7447A based MacRISC3 */
if (of_machine_is_compatible("MacRISC3") &&
of_get_property(cpunode, "dynamic-power-step", NULL) &&
PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
pmac_cpufreq_init_7447A(cpunode);
transition_latency = 8000000;
/* Check for other MacRISC3 machines */
} else if (of_machine_is_compatible("PowerBook3,4") ||
of_machine_is_compatible("PowerBook3,5") ||
......
arch/powerpc/platforms/powernv/pci-ioda.c
View file @ 16e024f3
......@@ -34,24 +34,12 @@
#include "powernv.h"
#include "pci.h"
static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
struct va_format *vaf)
{
char pfix[32];
if (pe->pdev)
strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
else
sprintf(pfix, "%04x:%02x ",
pci_domain_nr(pe->pbus), pe->pbus->number);
return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf);
}
#define define_pe_printk_level(func, kern_level) \
static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \
{ \
struct va_format vaf; \
va_list args; \
char pfix[32]; \
int r; \
\
va_start(args, fmt); \
......@@ -59,7 +47,16 @@ static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \
vaf.fmt = fmt; \
vaf.va = &args; \
\
r = __pe_printk(kern_level, pe, &vaf); \
if (pe->pdev) \
strlcpy(pfix, dev_name(&pe->pdev->dev), \
sizeof(pfix)); \
else \
sprintf(pfix, "%04x:%02x ", \
pci_domain_nr(pe->pbus), \
pe->pbus->number); \
r = printk(kern_level "pci %s: [PE# %.3d] %pV", \
pfix, pe->pe_number, &vaf); \
\
va_end(args); \
\
return r; \
......
arch/powerpc/platforms/ps3/os-area.c
View file @ 16e024f3
......@@ -280,13 +280,13 @@ static void os_area_set_property(struct device_node *node,
if (tmp) {
pr_debug("%s:%d found %s\n", __func__, __LINE__, prop->name);
prom_remove_property(node, tmp);
of_remove_property(node, tmp);
}
result = prom_add_property(node, prop);
result = of_add_property(node, prop);
if (result)
pr_debug("%s:%d prom_set_property failed\n", __func__,
pr_debug("%s:%d of_set_property failed\n", __func__,
__LINE__);
}
......
arch/powerpc/platforms/pseries/dlpar.c
View file @ 16e024f3
......@@ -13,17 +13,16 @@
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/notifier.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/of.h>
#include "offline_states.h"
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/rtas.h>
#include <asm/pSeries_reconfig.h>
struct cc_workarea {
u32 drc_index;
......@@ -255,9 +254,6 @@ static struct device_node *derive_parent(const char *path)
int dlpar_attach_node(struct device_node *dn)
{
#ifdef CONFIG_PROC_DEVICETREE
struct proc_dir_entry *ent;
#endif
int rc;
of_node_set_flag(dn, OF_DYNAMIC);
......@@ -266,44 +262,26 @@ int dlpar_attach_node(struct device_node *dn)
if (!dn->parent)
return -ENOMEM;
rc = pSeries_reconfig_notify(PSERIES_RECONFIG_ADD, dn);
rc = of_attach_node(dn);
if (rc) {
printk(KERN_ERR "Failed to add device node %s\n",
dn->full_name);
return rc;
}
of_attach_node(dn);
#ifdef CONFIG_PROC_DEVICETREE
ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
if (ent)
proc_device_tree_add_node(dn, ent);
#endif
of_node_put(dn->parent);
return 0;
}
int dlpar_detach_node(struct device_node *dn)
{
#ifdef CONFIG_PROC_DEVICETREE
struct device_node *parent = dn->parent;
struct property *prop = dn->properties;
while (prop) {
remove_proc_entry(prop->name, dn->pde);
prop = prop->next;
}
int rc;
if (dn->pde)
remove_proc_entry(dn->pde->name, parent->pde);
#endif
rc = of_detach_node(dn);
if (rc)
return rc;
pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, dn);
of_detach_node(dn);
of_node_put(dn); /* Must decrement the refcount */
return 0;
}
......
arch/powerpc/platforms/pseries/firmware.c
View file @ 16e024f3
......@@ -56,6 +56,7 @@ firmware_features_table[FIRMWARE_MAX_FEATURES] = {
{FW_FEATURE_MULTITCE, "hcall-multi-tce"},
{FW_FEATURE_SPLPAR, "hcall-splpar"},
{FW_FEATURE_VPHN, "hcall-vphn"},
{FW_FEATURE_SET_MODE, "hcall-set-mode"},
};
/* Build up the firmware features bitmask using the contents of
......
arch/powerpc/platforms/pseries/hotplug-cpu.c
View file @ 16e024f3
......@@ -23,12 +23,12 @@
#include <linux/delay.h>
#include <linux/sched.h> /* for idle_task_exit */
#include <linux/cpu.h>
#include <linux/of.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/vdso_datapage.h>
#include <asm/pSeries_reconfig.h>
#include <asm/xics.h>
#include "plpar_wrappers.h"
#include "offline_states.h"
......@@ -333,10 +333,10 @@ static int pseries_smp_notifier(struct notifier_block *nb,
int err = 0;
switch (action) {
case PSERIES_RECONFIG_ADD:
case OF_RECONFIG_ATTACH_NODE:
err = pseries_add_processor(node);
break;
case PSERIES_RECONFIG_REMOVE:
case OF_RECONFIG_DETACH_NODE:
pseries_remove_processor(node);
break;
}
......@@ -399,7 +399,7 @@ static int __init pseries_cpu_hotplug_init(void)
/* Processors can be added/removed only on LPAR */
if (firmware_has_feature(FW_FEATURE_LPAR)) {
pSeries_reconfig_notifier_register(&pseries_smp_nb);
of_reconfig_notifier_register(&pseries_smp_nb);
cpu_maps_update_begin();
if (cede_offline_enabled && parse_cede_parameters() == 0) {
default_offline_state = CPU_STATE_INACTIVE;
......
arch/powerpc/platforms/pseries/hotplug-memory.c
View file @ 16e024f3
......@@ -16,7 +16,6 @@
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/sparsemem.h>
static unsigned long get_memblock_size(void)
......@@ -187,42 +186,69 @@ static int pseries_add_memory(struct device_node *np)
return (ret < 0) ? -EINVAL : 0;
}
static int pseries_drconf_memory(unsigned long *base, unsigned int action)
static int pseries_update_drconf_memory(struct of_prop_reconfig *pr)
{
struct of_drconf_cell *new_drmem, *old_drmem;
unsigned long memblock_size;
int rc;
u32 entries;
u32 *p;
int i, rc = -EINVAL;
memblock_size = get_memblock_size();
if (!memblock_size)
return -EINVAL;
if (action == PSERIES_DRCONF_MEM_ADD) {
rc = memblock_add(*base, memblock_size);
rc = (rc < 0) ? -EINVAL : 0;
} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
rc = pseries_remove_memblock(*base, memblock_size);
} else {
rc = -EINVAL;
p = (u32 *)of_get_property(pr->dn, "ibm,dynamic-memory", NULL);
if (!p)
return -EINVAL;
/* The first int of the property is the number of lmb's described
* by the property. This is followed by an array of of_drconf_cell
* entries. Get the niumber of entries and skip to the array of
* of_drconf_cell's.
*/
entries = *p++;
old_drmem = (struct of_drconf_cell *)p;
p = (u32 *)pr->prop->value;
p++;
new_drmem = (struct of_drconf_cell *)p;
for (i = 0; i < entries; i++) {
if ((old_drmem[i].flags & DRCONF_MEM_ASSIGNED) &&
(!(new_drmem[i].flags & DRCONF_MEM_ASSIGNED))) {
rc = pseries_remove_memblock(old_drmem[i].base_addr,
memblock_size);
break;
} else if ((!(old_drmem[i].flags & DRCONF_MEM_ASSIGNED)) &&
(new_drmem[i].flags & DRCONF_MEM_ASSIGNED)) {
rc = memblock_add(old_drmem[i].base_addr,
memblock_size);
rc = (rc < 0) ? -EINVAL : 0;
break;
}
}
return rc;
}
static int pseries_memory_notifier(struct notifier_block *nb,
unsigned long action, void *node)
unsigned long action, void *node)
{
struct of_prop_reconfig *pr;
int err = 0;
switch (action) {
case PSERIES_RECONFIG_ADD:
case OF_RECONFIG_ATTACH_NODE:
err = pseries_add_memory(node);
break;
case PSERIES_RECONFIG_REMOVE:
case OF_RECONFIG_DETACH_NODE:
err = pseries_remove_memory(node);
break;
case PSERIES_DRCONF_MEM_ADD:
case PSERIES_DRCONF_MEM_REMOVE:
err = pseries_drconf_memory(node, action);
case OF_RECONFIG_UPDATE_PROPERTY:
pr = (struct of_prop_reconfig *)node;
if (!strcmp(pr->prop->name, "ibm,dynamic-memory"))
err = pseries_update_drconf_memory(pr);
break;
}
return notifier_from_errno(err);
......@@ -235,7 +261,7 @@ static struct notifier_block pseries_mem_nb = {
static int __init pseries_memory_hotplug_init(void)
{
if (firmware_has_feature(FW_FEATURE_LPAR))
pSeries_reconfig_notifier_register(&pseries_mem_nb);
of_reconfig_notifier_register(&pseries_mem_nb);
return 0;
}
......
arch/powerpc/platforms/pseries/iommu.c
View file @ 16e024f3
......@@ -36,13 +36,13 @@
#include <linux/dma-mapping.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
#include <linux/of.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/firmware.h>
#include <asm/tce.h>
#include <asm/ppc-pci.h>
......@@ -760,7 +760,7 @@ static void remove_ddw(struct device_node *np)
__remove_ddw(np, ddw_avail, liobn);
delprop:
ret = prom_remove_property(np, win64);
ret = of_remove_property(np, win64);
if (ret)
pr_warning("%s: failed to remove direct window property: %d\n",
np->full_name, ret);
......@@ -1070,7 +1070,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn)
goto out_free_window;
}
ret = prom_add_property(pdn, win64);
ret = of_add_property(pdn, win64);
if (ret) {
dev_err(&dev->dev, "unable to add dma window property for %s: %d",
pdn->full_name, ret);
......@@ -1294,7 +1294,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
struct direct_window *window;
switch (action) {
case PSERIES_RECONFIG_REMOVE:
case OF_RECONFIG_DETACH_NODE:
if (pci && pci->iommu_table)
iommu_free_table(pci->iommu_table, np->full_name);
......@@ -1357,7 +1357,7 @@ void iommu_init_early_pSeries(void)
}
pSeries_reconfig_notifier_register(&iommu_reconfig_nb);
of_reconfig_notifier_register(&iommu_reconfig_nb);
register_memory_notifier(&iommu_mem_nb);
set_pci_dma_ops(&dma_iommu_ops);
......
arch/powerpc/platforms/pseries/mobility.c
View file @ 16e024f3
......@@ -116,7 +116,7 @@ static int update_dt_property(struct device_node *dn, struct property **prop,
}
if (!more) {
prom_update_property(dn, new_prop);
of_update_property(dn, new_prop);
new_prop = NULL;
}
......@@ -172,7 +172,7 @@ static int update_dt_node(u32 phandle)
case 0x80000000:
prop = of_find_property(dn, prop_name, NULL);
prom_remove_property(dn, prop);
of_remove_property(dn, prop);
prop = NULL;
break;
......
arch/powerpc/platforms/pseries/plpar_wrappers.h
View file @ 16e024f3
......@@ -273,4 +273,35 @@ static inline long plpar_put_term_char(unsigned long termno, unsigned long len,
lbuf[1]);
}
/* Set various resource mode parameters */
static inline long plpar_set_mode(unsigned long mflags, unsigned long resource,
unsigned long value1, unsigned long value2)
{
return plpar_hcall_norets(H_SET_MODE, mflags, resource, value1, value2);
}
/*
* Enable relocation on exceptions on this partition
*
* Note: this call has a partition wide scope and can take a while to complete.
* If it returns H_LONG_BUSY_* it should be retried periodically until it
* returns H_SUCCESS.
*/
static inline long enable_reloc_on_exceptions(void)
{
/* mflags = 3: Exceptions at 0xC000000000004000 */
return plpar_set_mode(3, 3, 0, 0);
}
/*
* Disable relocation on exceptions on this partition
*
* Note: this call has a partition wide scope and can take a while to complete.
* If it returns H_LONG_BUSY_* it should be retried periodically until it
* returns H_SUCCESS.
*/
static inline long disable_reloc_on_exceptions(void) {
return plpar_set_mode(0, 3, 0, 0);
}
#endif /* _PSERIES_PLPAR_WRAPPERS_H */
arch/powerpc/platforms/pseries/reconfig.c
View file @ 16e024f3
......@@ -16,55 +16,13 @@
#include <linux/notifier.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/pSeries_reconfig.h>
#include <asm/mmu.h>
/*
* Routines for "runtime" addition and removal of device tree nodes.
*/
#ifdef CONFIG_PROC_DEVICETREE
/*
* Add a node to /proc/device-tree.
*/
static void add_node_proc_entries(struct device_node *np)
{
struct proc_dir_entry *ent;
ent = proc_mkdir(strrchr(np->full_name, '/') + 1, np->parent->pde);
if (ent)
proc_device_tree_add_node(np, ent);
}
static void remove_node_proc_entries(struct device_node *np)
{
struct property *pp = np->properties;
struct device_node *parent = np->parent;
while (pp) {
remove_proc_entry(pp->name, np->pde);
pp = pp->next;
}
if (np->pde)
remove_proc_entry(np->pde->name, parent->pde);
}
#else /* !CONFIG_PROC_DEVICETREE */
static void add_node_proc_entries(struct device_node *np)
{
return;
}
static void remove_node_proc_entries(struct device_node *np)
{
return;
}
#endif /* CONFIG_PROC_DEVICETREE */
/**
* derive_parent - basically like dirname(1)
* @path: the full_name of a node to be added to the tree
......@@ -97,28 +55,6 @@ static struct device_node *derive_parent(const char *path)
return parent;
}
static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&pSeries_reconfig_chain, nb);
}
EXPORT_SYMBOL_GPL(pSeries_reconfig_notifier_register);
void pSeries_reconfig_notifier_unregister(struct notifier_block *nb)
{
blocking_notifier_chain_unregister(&pSeries_reconfig_chain, nb);
}
EXPORT_SYMBOL_GPL(pSeries_reconfig_notifier_unregister);
int pSeries_reconfig_notify(unsigned long action, void *p)
{
int err = blocking_notifier_call_chain(&pSeries_reconfig_chain,
action, p);
return notifier_to_errno(err);
}
static int pSeries_reconfig_add_node(const char *path, struct property *proplist)
{
struct device_node *np;
......@@ -142,16 +78,12 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
goto out_err;
}
err = pSeries_reconfig_notify(PSERIES_RECONFIG_ADD, np);
err = of_attach_node(np);
if (err) {
printk(KERN_ERR "Failed to add device node %s\n", path);
goto out_err;
}
of_attach_node(np);
add_node_proc_entries(np);
of_node_put(np->parent);
return 0;
......@@ -179,11 +111,7 @@ static int pSeries_reconfig_remove_node(struct device_node *np)
return -EBUSY;
}
remove_node_proc_entries(np);
pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, np);
of_detach_node(np);
of_node_put(parent);
of_node_put(np); /* Must decrement the refcount */
return 0;
......@@ -397,7 +325,7 @@ static int do_add_property(char *buf, size_t bufsize)
if (!prop)
return -ENOMEM;
prom_add_property(np, prop);
of_add_property(np, prop);
return 0;
}
......@@ -421,16 +349,15 @@ static int do_remove_property(char *buf, size_t bufsize)
prop = of_find_property(np, buf, NULL);
return prom_remove_property(np, prop);
return of_remove_property(np, prop);
}
static int do_update_property(char *buf, size_t bufsize)
{
struct device_node *np;
struct pSeries_reconfig_prop_update upd_value;
unsigned char *value;
char *name, *end, *next_prop;
int rc, length;
int length;
struct property *newprop;
buf = parse_node(buf, bufsize, &np);
end = buf + bufsize;
......@@ -452,41 +379,7 @@ static int do_update_property(char *buf, size_t bufsize)
if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
slb_set_size(*(int *)value);
upd_value.node = np;
upd_value.property = newprop;
pSeries_reconfig_notify(PSERIES_UPDATE_PROPERTY, &upd_value);
rc = prom_update_property(np, newprop);
if (rc)
return rc;
/* For memory under the ibm,dynamic-reconfiguration-memory node
* of the device tree, adding and removing memory is just an update
* to the ibm,dynamic-memory property instead of adding/removing a
* memory node in the device tree. For these cases we still need to
* involve the notifier chain.
*/
if (!strcmp(name, "ibm,dynamic-memory")) {
int action;
next_prop = parse_next_property(next_prop, end, &name,
&length, &value);
if (!next_prop)
return -EINVAL;
if (!strcmp(name, "add"))
action = PSERIES_DRCONF_MEM_ADD;
else
action = PSERIES_DRCONF_MEM_REMOVE;
rc = pSeries_reconfig_notify(action, value);
if (rc) {
prom_update_property(np, newprop);
return rc;
}
}
return 0;
return of_update_property(np, newprop);
}
/**
......
arch/powerpc/platforms/pseries/setup.c
View file @ 16e024f3
......@@ -40,6 +40,8 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpuidle.h>
#include <linux/of.h>
#include <linux/kexec.h>
#include <asm/mmu.h>
#include <asm/processor.h>
......@@ -63,7 +65,6 @@
#include <asm/smp.h>
#include <asm/firmware.h>
#include <asm/eeh.h>
#include <asm/pSeries_reconfig.h>
#include "plpar_wrappers.h"
#include "pseries.h"
......@@ -258,7 +259,7 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act
int err = NOTIFY_OK;
switch (action) {
case PSERIES_RECONFIG_ADD:
case OF_RECONFIG_ATTACH_NODE:
pci = np->parent->data;
if (pci) {
update_dn_pci_info(np, pci->phb);
......@@ -367,6 +368,65 @@ static void pSeries_idle(void)
}
}
/*
* Enable relocation on during exceptions. This has partition wide scope and
* may take a while to complete, if it takes longer than one second we will
* just give up rather than wasting any more time on this - if that turns out
* to ever be a problem in practice we can move this into a kernel thread to
* finish off the process later in boot.
*/
static int __init pSeries_enable_reloc_on_exc(void)
{
long rc;
unsigned int delay, total_delay = 0;
while (1) {
rc = enable_reloc_on_exceptions();
if (!H_IS_LONG_BUSY(rc))
return rc;
delay = get_longbusy_msecs(rc);
total_delay += delay;
if (total_delay > 1000) {
pr_warn("Warning: Giving up waiting to enable "
"relocation on exceptions (%u msec)!\n",
total_delay);
return rc;
}
mdelay(delay);
}
}
#ifdef CONFIG_KEXEC
static long pSeries_disable_reloc_on_exc(void)
{
long rc;
while (1) {
rc = disable_reloc_on_exceptions();
if (!H_IS_LONG_BUSY(rc))
return rc;
mdelay(get_longbusy_msecs(rc));
}
}
static void pSeries_machine_kexec(struct kimage *image)
{
long rc;
if (firmware_has_feature(FW_FEATURE_SET_MODE) &&
(image->type != KEXEC_TYPE_CRASH)) {
rc = pSeries_disable_reloc_on_exc();
if (rc != H_SUCCESS)
pr_warning("Warning: Failed to disable relocation on "
"exceptions: %ld\n", rc);
}
default_machine_kexec(image);
}
#endif
static void __init pSeries_setup_arch(void)
{
panic_timeout = 10;
......@@ -389,7 +449,7 @@ static void __init pSeries_setup_arch(void)
/* Find and initialize PCI host bridges */
init_pci_config_tokens();
find_and_init_phbs();
pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb);
of_reconfig_notifier_register(&pci_dn_reconfig_nb);
pSeries_nvram_init();
......@@ -402,6 +462,14 @@ static void __init pSeries_setup_arch(void)
ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
else
ppc_md.enable_pmcs = power4_enable_pmcs;
if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
long rc;
if ((rc = pSeries_enable_reloc_on_exc()) != H_SUCCESS) {
pr_warn("Unable to enable relocation on exceptions: "
"%ld\n", rc);
}
}
}
static int __init pSeries_init_panel(void)
......@@ -659,4 +727,7 @@ define_machine(pseries) {
.progress = rtas_progress,
.system_reset_exception = pSeries_system_reset_exception,
.machine_check_exception = pSeries_machine_check_exception,
#ifdef CONFIG_KEXEC
.machine_kexec = pSeries_machine_kexec,
#endif
};
arch/powerpc/platforms/pseries/smp.c
View file @ 16e024f3
......@@ -38,7 +38,6 @@
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/rtas.h>
#include <asm/pSeries_reconfig.h>
#include <asm/mpic.h>
#include <asm/vdso_datapage.h>
#include <asm/cputhreads.h>
......
arch/powerpc/sysdev/fsl_gtm.c
View file @ 16e024f3
/*
* Freescale General-purpose Timers Module
*
* Copyright (c) Freescale Semicondutor, Inc. 2006.
* Copyright (c) Freescale Semiconductor, Inc. 2006.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
......
arch/powerpc/sysdev/fsl_pci.c
View file @ 16e024f3
......@@ -89,7 +89,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
return 0;
}
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
static int setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
{
......@@ -126,7 +126,7 @@ static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
}
/* atmu setup for fsl pci/pcie controller */
static void __init setup_pci_atmu(struct pci_controller *hose,
static void setup_pci_atmu(struct pci_controller *hose,
struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
......@@ -902,9 +902,42 @@ static int __devinit fsl_pci_probe(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
static int fsl_pci_resume(struct device *dev)
{
struct pci_controller *hose;
struct resource pci_rsrc;
hose = pci_find_hose_for_OF_device(dev->of_node);
if (!hose)
return -ENODEV;
if (of_address_to_resource(dev->of_node, 0, &pci_rsrc)) {
dev_err(dev, "Get pci register base failed.");
return -ENODEV;
}
setup_pci_atmu(hose, &pci_rsrc);
return 0;
}
static const struct dev_pm_ops pci_pm_ops = {
.resume = fsl_pci_resume,
};
#define PCI_PM_OPS (&pci_pm_ops)
#else
#define PCI_PM_OPS NULL
#endif
static struct platform_driver fsl_pci_driver = {
.driver = {
.name = "fsl-pci",
.pm = PCI_PM_OPS,
.of_match_table = pci_ids,
},
.probe = fsl_pci_probe,
......
arch/powerpc/sysdev/pmi.c
View file @ 16e024f3
......@@ -214,18 +214,7 @@ static struct platform_driver pmi_of_platform_driver = {
.of_match_table = pmi_match,
},
};
static int __init pmi_module_init(void)
{
return platform_driver_register(&pmi_of_platform_driver);
}
module_init(pmi_module_init);
static void __exit pmi_module_exit(void)
{
platform_driver_unregister(&pmi_of_platform_driver);
}
module_exit(pmi_module_exit);
module_platform_driver(pmi_of_platform_driver);
int pmi_send_message(pmi_message_t msg)
{
......
arch/powerpc/sysdev/qe_lib/qe.c
View file @ 16e024f3
/*
* Copyright (C) 2006-2010 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/sysdev/qe_lib/qe_ic.c
View file @ 16e024f3
/*
* arch/powerpc/sysdev/qe_lib/qe_ic.c
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
......
arch/powerpc/sysdev/qe_lib/qe_ic.h
View file @ 16e024f3
......@@ -3,7 +3,7 @@
*
* QUICC ENGINE Interrupt Controller Header
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
......
arch/powerpc/sysdev/qe_lib/qe_io.c
View file @ 16e024f3
......@@ -3,7 +3,7 @@
*
* QE Parallel I/O ports configuration routines
*
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
* Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <LeoLi@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
......
arch/powerpc/sysdev/qe_lib/ucc.c
View file @ 16e024f3
......@@ -3,7 +3,7 @@
*
* QE UCC API Set - UCC specific routines implementations.
*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/sysdev/qe_lib/ucc_fast.c
View file @ 16e024f3
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/sysdev/qe_lib/ucc_slow.c
View file @ 16e024f3
/*
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
......
arch/powerpc/sysdev/qe_lib/usb.c
View file @ 16e024f3
/*
* QE USB routines
*
* Copyright (c) Freescale Semicondutor, Inc. 2006.
* Copyright 2006 Freescale Semiconductor, Inc.
* Shlomi Gridish <gridish@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
* Copyright (c) MontaVista Software, Inc. 2008.
......
arch/powerpc/xmon/Makefile
View file @ 16e024f3
......@@ -6,7 +6,7 @@ GCOV_PROFILE := n
ccflags-$(CONFIG_PPC64) := -mno-minimal-toc
obj-y += xmon.o start.o nonstdio.o
obj-y += xmon.o nonstdio.o
ifdef CONFIG_XMON_DISASSEMBLY
obj-y += ppc-dis.o ppc-opc.o
......
arch/powerpc/xmon/nonstdio.c
View file @ 16e024f3
......@@ -7,9 +7,23 @@
* 2 of the License, or (at your option) any later version.
*/
#include <linux/string.h>
#include <asm/udbg.h>
#include <asm/time.h>
#include "nonstdio.h"
static int xmon_write(const void *ptr, int nb)
{
return udbg_write(ptr, nb);
}
static int xmon_readchar(void)
{
if (udbg_getc)
return udbg_getc();
return -1;
}
int xmon_putchar(int c)
{
char ch = c;
......@@ -23,34 +37,7 @@ static char line[256];
static char *lineptr;
static int lineleft;
int xmon_expect(const char *str, unsigned long timeout)
{
int c;
unsigned long t0;
/* assume 25MHz default timebase if tb_ticks_per_sec not set yet */
timeout *= tb_ticks_per_sec? tb_ticks_per_sec: 25000000;
t0 = get_tbl();
do {
lineptr = line;
for (;;) {
c = xmon_read_poll();
if (c == -1) {
if (get_tbl() - t0 > timeout)
return 0;
continue;
}
if (c == '\n')
break;
if (c != '\r' && lineptr < &line[sizeof(line) - 1])
*lineptr++ = c;
}
*lineptr = 0;
} while (strstr(line, str) == NULL);
return 1;
}
int xmon_getchar(void)
static int xmon_getchar(void)
{
int c;
......@@ -124,13 +111,19 @@ char *xmon_gets(char *str, int nb)
void xmon_printf(const char *format, ...)
{
va_list args;
int n;
static char xmon_outbuf[1024];
int rc, n;
va_start(args, format);
n = vsnprintf(xmon_outbuf, sizeof(xmon_outbuf), format, args);
va_end(args);
xmon_write(xmon_outbuf, n);
rc = xmon_write(xmon_outbuf, n);
if (n && rc == 0) {
/* No udbg hooks, fallback to printk() - dangerous */
printk(xmon_outbuf);
}
}
void xmon_puts(const char *str)
......
arch/powerpc/xmon/nonstdio.h
View file @ 16e024f3
......@@ -4,12 +4,6 @@
#define putchar xmon_putchar
extern int xmon_putchar(int c);
extern int xmon_getchar(void);
extern void xmon_puts(const char *);
extern char *xmon_gets(char *, int);
extern void xmon_printf(const char *, ...);
extern void xmon_map_scc(void);
extern int xmon_expect(const char *str, unsigned long timeout);
extern int xmon_write(const void *ptr, int nb);
extern int xmon_readchar(void);
extern int xmon_read_poll(void);
arch/powerpc/xmon/start.c deleted 100644 → 0
View file @ c36e0501
/*
* Copyright (C) 1996 Paul Mackerras.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/machdep.h>
#include <asm/udbg.h>
#include "nonstdio.h"
void xmon_map_scc(void)
{
}
int xmon_write(const void *ptr, int nb)
{
return udbg_write(ptr, nb);
}
int xmon_readchar(void)
{
if (udbg_getc)
return udbg_getc();
return -1;
}
int xmon_read_poll(void)
{
if (udbg_getc_poll)
return udbg_getc_poll();
return -1;
}
arch/powerpc/xmon/xmon.c
View file @ 16e024f3
......@@ -52,9 +52,6 @@
#include "nonstdio.h"
#include "dis-asm.h"
#define scanhex xmon_scanhex
#define skipbl xmon_skipbl
#ifdef CONFIG_SMP
static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
static unsigned long xmon_taken = 1;
......@@ -169,12 +166,8 @@ extern void xmon_leave(void);
#ifdef CONFIG_PPC64
#define REG "%.16lx"
#define REGS_PER_LINE 4
#define LAST_VOLATILE 13
#else
#define REG "%.8lx"
#define REGS_PER_LINE 8
#define LAST_VOLATILE 12
#endif
#define GETWORD(v) (((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
......@@ -1288,27 +1281,19 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp,
catch_memory_errors = 0;
}
static int xmon_depth_to_print = 64;
#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long))
#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long))
#ifdef __powerpc64__
#define REGS_OFFSET 0x70
#else
#define REGS_OFFSET 16
#endif
static void xmon_show_stack(unsigned long sp, unsigned long lr,
unsigned long pc)
{
int max_to_print = 64;
unsigned long ip;
unsigned long newsp;
unsigned long marker;
int count = 0;
struct pt_regs regs;
do {
while (max_to_print--) {
if (sp < PAGE_OFFSET) {
if (sp != 0)
printf("SP (%lx) is in userspace\n", sp);
......@@ -1362,10 +1347,10 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
an exception frame. */
if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
&& marker == STACK_FRAME_REGS_MARKER) {
if (mread(sp + REGS_OFFSET, &regs, sizeof(regs))
if (mread(sp + STACK_FRAME_OVERHEAD, &regs, sizeof(regs))
!= sizeof(regs)) {
printf("Couldn't read registers at %lx\n",
sp + REGS_OFFSET);
sp + STACK_FRAME_OVERHEAD);
break;
}
printf("--- Exception: %lx %s at ", regs.trap,
......@@ -1379,7 +1364,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
break;
sp = newsp;
} while (count++ < xmon_depth_to_print);
}
}
static void backtrace(struct pt_regs *excp)
......@@ -2943,7 +2928,6 @@ static void xmon_init(int enable)
__debugger_dabr_match = NULL;
__debugger_fault_handler = NULL;
}
xmon_map_scc();
}
#ifdef CONFIG_MAGIC_SYSRQ
......
drivers/crypto/nx/nx-842.c
View file @ 16e024f3
......@@ -28,7 +28,6 @@
#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pSeries_reconfig.h>
#include <asm/vio.h>
#include "nx_csbcpb.h" /* struct nx_csbcpb */
......@@ -1014,26 +1013,23 @@ static int nx842_OF_upd(struct property *new_prop)
* NOTIFY_BAD encoded with error number on failure, use
* notifier_to_errno() to decode this value
*/
static int nx842_OF_notifier(struct notifier_block *np,
unsigned long action,
void *update)
static int nx842_OF_notifier(struct notifier_block *np, unsigned long action,
void *update)
{
struct pSeries_reconfig_prop_update *upd;
struct of_prop_reconfig *upd = update;
struct nx842_devdata *local_devdata;
struct device_node *node = NULL;
upd = (struct pSeries_reconfig_prop_update *)update;
rcu_read_lock();
local_devdata = rcu_dereference(devdata);
if (local_devdata)
node = local_devdata->dev->of_node;
if (local_devdata &&
action == PSERIES_UPDATE_PROPERTY &&
!strcmp(upd->node->name, node->name)) {
action == OF_RECONFIG_UPDATE_PROPERTY &&
!strcmp(upd->dn->name, node->name)) {
rcu_read_unlock();
nx842_OF_upd(upd->property);
nx842_OF_upd(upd->prop);
} else
rcu_read_unlock();
......@@ -1182,7 +1178,7 @@ static int __init nx842_probe(struct vio_dev *viodev,
synchronize_rcu();
kfree(old_devdata);
pSeries_reconfig_notifier_register(&nx842_of_nb);
of_reconfig_notifier_register(&nx842_of_nb);
ret = nx842_OF_upd(NULL);
if (ret && ret != -ENODEV) {
......@@ -1228,7 +1224,7 @@ static int __exit nx842_remove(struct vio_dev *viodev)
spin_lock_irqsave(&devdata_mutex, flags);
old_devdata = rcu_dereference_check(devdata,
lockdep_is_held(&devdata_mutex));
pSeries_reconfig_notifier_unregister(&nx842_of_nb);
of_reconfig_notifier_unregister(&nx842_of_nb);
rcu_assign_pointer(devdata, NULL);
spin_unlock_irqrestore(&devdata_mutex, flags);
synchronize_rcu();
......
drivers/crypto/nx/nx.c
View file @ 16e024f3
This diff is collapsed.
drivers/infiniband/hw/ehca/hcp_if.c
View file @ 16e024f3
This diff is collapsed.
drivers/macintosh/smu.c
View file @ 16e024f3
This diff is collapsed.
drivers/macintosh/windfarm_fcu_controls.c
View file @ 16e024f3
This diff is collapsed.
drivers/macintosh/windfarm_lm75_sensor.c
View file @ 16e024f3
This diff is collapsed.
drivers/macintosh/windfarm_max6690_sensor.c
View file @ 16e024f3
This diff is collapsed.
drivers/macintosh/windfarm_smu_sat.c
View file @ 16e024f3
This diff is collapsed.
drivers/net/ethernet/ibm/ehea/ehea_phyp.h
View file @ 16e024f3
This diff is collapsed.
drivers/of/base.c
View file @ 16e024f3
This diff is collapsed.
drivers/video/Kconfig
View file @ 16e024f3
This diff is collapsed.
drivers/video/gxt4500.c
View file @ 16e024f3
This diff is collapsed.
drivers/virt/fsl_hypervisor.c
View file @ 16e024f3
This diff is collapsed.
include/linux/of.h
View file @ 16e024f3
This diff is collapsed.
lib/Kconfig.debug
View file @ 16e024f3
This diff is collapsed.
lib/Makefile
View file @ 16e024f3
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7