Commit 16feab64 authored by Salah Triki's avatar Salah Triki Committed by Greg Kroah-Hartman

staging: rtl8192u: check return value eprom_read

The call of eprom_read may fail, therefore its return value must be
checked
Signed-off-by: default avatarSalah Triki <salah.triki@acm.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6ceb65b8
......@@ -2429,9 +2429,13 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u16 tmpValue = 0;
int i;
int ret;
RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
wEPROM_ID = eprom_read(dev, 0); /* first read EEPROM ID out; */
ret = eprom_read(dev, 0); /* first read EEPROM ID out; */
if (ret < 0)
return;
wEPROM_ID = (u16)ret;
RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
if (wEPROM_ID != RTL8190_EEPROM_ID)
......@@ -2443,13 +2447,25 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
if (bLoad_From_EEPOM) {
tmpValue = eprom_read(dev, EEPROM_VID >> 1);
ret = eprom_read(dev, EEPROM_VID >> 1);
if (ret < 0)
return;
tmpValue = (u16)ret;
priv->eeprom_vid = endian_swap(&tmpValue);
priv->eeprom_pid = eprom_read(dev, EEPROM_PID >> 1);
tmpValue = eprom_read(dev, EEPROM_ChannelPlan >> 1);
ret = eprom_read(dev, EEPROM_PID >> 1);
if (ret < 0)
return;
priv->eeprom_pid = (u16)ret;
ret = eprom_read(dev, EEPROM_ChannelPlan >> 1);
if (ret < 0)
return;
tmpValue = (u16)ret;
priv->eeprom_ChannelPlan = (tmpValue & 0xff00) >> 8;
priv->btxpowerdata_readfromEEPORM = true;
priv->eeprom_CustomerID =
eprom_read(dev, (EEPROM_Customer_ID >> 1)) >> 8;
ret = eprom_read(dev, (EEPROM_Customer_ID >> 1)) >> 8;
if (ret < 0)
return;
priv->eeprom_CustomerID = (u16)ret;
} else {
priv->eeprom_vid = 0;
priv->eeprom_pid = 0;
......@@ -2467,10 +2483,10 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
int i;
for (i = 0; i < 6; i += 2) {
u16 tmp = 0;
tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i) >> 1));
*(u16 *)(&dev->dev_addr[i]) = tmp;
ret = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i) >> 1));
if (ret < 0)
return;
*(u16 *)(&dev->dev_addr[i]) = (u16)ret;
}
} else {
memcpy(dev->dev_addr, bMac_Tmp_Addr, 6);
......@@ -2482,52 +2498,72 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
if (priv->card_8192_version == (u8)VERSION_819xU_A) {
/* read Tx power gain offset of legacy OFDM to HT rate */
if (bLoad_From_EEPOM)
priv->EEPROMTxPowerDiff = (eprom_read(dev, (EEPROM_TxPowerDiff >> 1)) & 0xff00) >> 8;
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_TxPowerDiff >> 1));
if (ret < 0)
return;
priv->EEPROMTxPowerDiff = ((u16)ret & 0xff00) >> 8;
} else
priv->EEPROMTxPowerDiff = EEPROM_Default_TxPower;
RT_TRACE(COMP_EPROM, "TxPowerDiff:%d\n", priv->EEPROMTxPowerDiff);
/* read ThermalMeter from EEPROM */
if (bLoad_From_EEPOM)
priv->EEPROMThermalMeter = (u8)(eprom_read(dev, (EEPROM_ThermalMeter >> 1)) & 0x00ff);
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_ThermalMeter >> 1));
if (ret < 0)
return;
priv->EEPROMThermalMeter = (u8)((u16)ret & 0x00ff);
} else
priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
RT_TRACE(COMP_EPROM, "ThermalMeter:%d\n", priv->EEPROMThermalMeter);
/* for tx power track */
priv->TSSI_13dBm = priv->EEPROMThermalMeter * 100;
/* read antenna tx power offset of B/C/D to A from EEPROM */
if (bLoad_From_EEPOM)
priv->EEPROMPwDiff = (eprom_read(dev, (EEPROM_PwDiff >> 1)) & 0x0f00) >> 8;
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_PwDiff >> 1));
if (ret < 0)
return;
priv->EEPROMPwDiff = ((u16)ret & 0x0f00) >> 8;
} else
priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
RT_TRACE(COMP_EPROM, "TxPwDiff:%d\n", priv->EEPROMPwDiff);
/* Read CrystalCap from EEPROM */
if (bLoad_From_EEPOM)
priv->EEPROMCrystalCap = (eprom_read(dev, (EEPROM_CrystalCap >> 1)) & 0x0f);
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_CrystalCap >> 1));
if (ret < 0)
return;
priv->EEPROMCrystalCap = (u16)ret & 0x0f;
} else
priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
RT_TRACE(COMP_EPROM, "CrystalCap = %d\n", priv->EEPROMCrystalCap);
/* get per-channel Tx power level */
if (bLoad_From_EEPOM)
priv->EEPROM_Def_Ver = (eprom_read(dev, (EEPROM_TxPwIndex_Ver >> 1)) & 0xff00) >> 8;
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_TxPwIndex_Ver >> 1));
if (ret < 0)
return;
priv->EEPROM_Def_Ver = ((u16)ret & 0xff00) >> 8;
} else
priv->EEPROM_Def_Ver = 1;
RT_TRACE(COMP_EPROM, "EEPROM_DEF_VER:%d\n", priv->EEPROM_Def_Ver);
if (priv->EEPROM_Def_Ver == 0) { /* old eeprom definition */
int i;
if (bLoad_From_EEPOM)
priv->EEPROMTxPowerLevelCCK = (eprom_read(dev, (EEPROM_TxPwIndex_CCK >> 1)) & 0xff) >> 8;
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_TxPwIndex_CCK >> 1));
if (ret < 0)
return;
priv->EEPROMTxPowerLevelCCK = ((u16)ret & 0xff) >> 8;
} else
priv->EEPROMTxPowerLevelCCK = 0x10;
RT_TRACE(COMP_EPROM, "CCK Tx Power Levl: 0x%02x\n", priv->EEPROMTxPowerLevelCCK);
for (i = 0; i < 3; i++) {
if (bLoad_From_EEPOM) {
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G + i) >> 1);
ret = eprom_read(dev, (EEPROM_TxPwIndex_OFDM_24G + i) >> 1);
if ( ret < 0)
return;
if (((EEPROM_TxPwIndex_OFDM_24G + i) % 2) == 0)
tmpValue = tmpValue & 0x00ff;
tmpValue = (u16)ret & 0x00ff;
else
tmpValue = (tmpValue & 0xff00) >> 8;
tmpValue = ((u16)ret & 0xff00) >> 8;
} else {
tmpValue = 0x10;
}
......@@ -2536,17 +2572,21 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
}
} else if (priv->EEPROM_Def_Ver == 1) {
if (bLoad_From_EEPOM) {
tmpValue = eprom_read(dev,
EEPROM_TxPwIndex_CCK_V1 >> 1);
tmpValue = (tmpValue & 0xff00) >> 8;
ret = eprom_read(dev, EEPROM_TxPwIndex_CCK_V1 >> 1);
if (ret < 0)
return;
tmpValue = ((u16)ret & 0xff00) >> 8;
} else {
tmpValue = 0x10;
}
priv->EEPROMTxPowerLevelCCK_V1[0] = (u8)tmpValue;
if (bLoad_From_EEPOM)
tmpValue = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2) >> 1);
else
if (bLoad_From_EEPOM) {
ret = eprom_read(dev, (EEPROM_TxPwIndex_CCK_V1 + 2) >> 1);
if (ret < 0)
return;
tmpValue = (u16)ret;
} else
tmpValue = 0x1010;
*((u16 *)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
if (bLoad_From_EEPOM)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment