Commit 17297a28 authored by Thierry Reding's avatar Thierry Reding

drm/tegra: dsi - Initialize proper packet sequences

The packet sequencer needs to be programmed depending on the video mode
of the attached peripheral. Add support for non-burst video modes with
sync events (as opposed to sync pulses) and select either sequence
depending on the video mode.
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 3b077afb
......@@ -45,6 +45,7 @@ struct tegra_dsi {
struct drm_minor *minor;
struct dentry *debugfs;
unsigned long flags;
enum mipi_dsi_pixel_format format;
unsigned int lanes;
......@@ -248,8 +249,10 @@ static int tegra_dsi_debugfs_exit(struct tegra_dsi *dsi)
#define PKT_LP (1 << 30)
#define NUM_PKT_SEQ 12
/* non-burst mode with sync-end */
static const u32 pkt_seq_vnb_syne[NUM_PKT_SEQ] = {
/*
* non-burst mode with sync pulses
*/
static const u32 pkt_seq_video_non_burst_sync_pulses[NUM_PKT_SEQ] = {
[ 0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(1) |
PKT_ID2(MIPI_DSI_H_SYNC_END) | PKT_LEN2(0) |
......@@ -284,6 +287,36 @@ static const u32 pkt_seq_vnb_syne[NUM_PKT_SEQ] = {
PKT_ID2(MIPI_DSI_BLANKING_PACKET) | PKT_LEN2(4),
};
/*
* non-burst mode with sync events
*/
static const u32 pkt_seq_video_non_burst_sync_events[NUM_PKT_SEQ] = {
[ 0] = PKT_ID0(MIPI_DSI_V_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
[ 1] = 0,
[ 2] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
[ 3] = 0,
[ 4] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
[ 5] = 0,
[ 6] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(2) |
PKT_ID2(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN2(3),
[ 7] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(4),
[ 8] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_END_OF_TRANSMISSION) | PKT_LEN1(7) |
PKT_LP,
[ 9] = 0,
[10] = PKT_ID0(MIPI_DSI_H_SYNC_START) | PKT_LEN0(0) |
PKT_ID1(MIPI_DSI_BLANKING_PACKET) | PKT_LEN1(2) |
PKT_ID2(MIPI_DSI_PACKED_PIXEL_STREAM_24) | PKT_LEN2(3),
[11] = PKT_ID0(MIPI_DSI_BLANKING_PACKET) | PKT_LEN0(4),
};
static int tegra_dsi_set_phy_timing(struct tegra_dsi *dsi)
{
struct mipi_dphy_timing timing;
......@@ -398,12 +431,19 @@ static int tegra_output_dsi_enable(struct tegra_output *output)
struct drm_display_mode *mode = &dc->base.mode;
unsigned int hact, hsw, hbp, hfp, i, mul, div;
struct tegra_dsi *dsi = to_dsi(output);
/* FIXME: don't hardcode this */
const u32 *pkt_seq = pkt_seq_vnb_syne;
enum tegra_dsi_format format;
unsigned long value;
const u32 *pkt_seq;
int err;
if (dsi->flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
DRM_DEBUG_KMS("Non-burst video mode with sync pulses\n");
pkt_seq = pkt_seq_video_non_burst_sync_pulses;
} else {
DRM_DEBUG_KMS("Non-burst video mode with sync events\n");
pkt_seq = pkt_seq_video_non_burst_sync_events;
}
err = tegra_dsi_get_muldiv(dsi->format, &mul, &div);
if (err < 0)
return err;
......@@ -728,6 +768,7 @@ static int tegra_dsi_host_attach(struct mipi_dsi_host *host,
struct tegra_dsi *dsi = host_to_tegra(host);
struct tegra_output *output = &dsi->output;
dsi->flags = device->mode_flags;
dsi->format = device->format;
dsi->lanes = device->lanes;
......@@ -782,6 +823,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
* attaches to the DSI host, the parameters will be taken from
* the attached device.
*/
dsi->flags = MIPI_DSI_MODE_VIDEO;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->lanes = 4;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment