Commit 17caa38a authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Dmitry Torokhov

dt-bindings: input: cypress,cyapa: convert to dtschema

Convert the Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
bindings to DT schema.
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230511102559.175088-1-krzysztof.kozlowski@linaro.orgSigned-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent e96220bc
Cypress I2C Touchpad
Required properties:
- compatible: must be "cypress,cyapa".
- reg: I2C address of the chip.
- interrupts: interrupt to which the chip is connected (see interrupt
binding[0]).
Optional properties:
- wakeup-source: touchpad can be used as a wakeup source.
- pinctrl-names: should be "default" (see pinctrl binding [1]).
- pinctrl-0: a phandle pointing to the pin settings for the device (see
pinctrl binding [1]).
- vcc-supply: a phandle for the regulator supplying 3.3V power.
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
&i2c0 {
/* ... */
/* Cypress Gen3 touchpad */
touchpad@67 {
compatible = "cypress,cyapa";
reg = <0x67>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;
};
/* Cypress Gen5 and later touchpad */
touchpad@24 {
compatible = "cypress,cyapa";
reg = <0x24>;
interrupt-parent = <&gpio>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
wakeup-source;
};
/* ... */
};
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
properties:
compatible:
const: cypress,cyapa
reg:
maxItems: 1
interrupts:
maxItems: 1
wakeup-source: true
vcc-supply:
description: 3.3V power
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
trackpad@67 {
reg = <0x67>;
compatible = "cypress,cyapa";
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment