Merge kernel.bkbits.net:net-drivers-2.5

into redhat.com:/spare/repo/net-drivers-2.5

drivers/net/wireless/Kconfig

@@ -307,6 +307,53 @@ config PCMCIA_WL3501
 	 It has basic support for Linux wireless extensions and initial
 	 micro support for ethtool.
 
+comment "Prism GT/Duette 802.11(a/b/g) PCI/PCMCIA support"
+	depends on NET_RADIO && PCI
+config PRISM54
+	tristate 'Intersil Prism GT/Duette/Indigo PCI/PCMCIA' 
+	depends on PCI && NET_RADIO && EXPERIMENTAL && HOTPLUG
+	select FW_LOADER
+	---help---
+	  Enable PCI and Cardbus support for the following chipset based cards:
+
+	  ISL3880 - Prism GT		802.11 b/g
+	  ISL3877 - Prism Indigo	802.11 a
+	  ISL3890 - Prism Duette	802.11 a/b/g
+	  
+	  For a complete list of supported cards visit <http://prism54.org>.
+	  Here is the latest confirmed list of supported cards:
+
+	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+	  Allnet ALL0271 PCI Card
+	  Compex WL54G Cardbus Card
+	  Corega CG-WLCB54GT Cardbus Card
+	  D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+	  I-O Data WN-G54/CB Cardbus Card
+	  Kobishi XG-300 aka Z-Com Cardbus Card
+	  Netgear WG511 Cardbus Card
+	  Ovislink WL-5400PCI PCI Card
+	  Peabird WLG-PCI PCI Card
+	  Sitecom WL-100i Cardbus Card
+	  Sitecom WL-110i PCI Card
+	  SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+	  SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+	  Z-Com XG-900 PCI Card
+	  Zyxel G-100 Cardbus Card
+
+	  If you enable this you will need a firmware file as well.
+	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+	  You can get this non-GPL'd firmware file from the Prism54 project page:
+	  <http://prism54.org>
+	  You will also need the /etc/hotplug/firmware.agent script from
+	  a current hotplug package.
+
+	  Note: You need a motherboard with DMA support to use any of these cards 
+	  
+	  If you want to compile the driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called prism54.ko.
+
 # yes, this works even when no drivers are selected
 config NET_WIRELESS
 	bool

drivers/net/wireless/Makefile

@@ -26,6 +26,8 @@ obj-$(CONFIG_ATMEL)             += atmel.o
 obj-$(CONFIG_PCI_ATMEL)         += atmel_pci.o 
 obj-$(CONFIG_PCMCIA_ATMEL)      += atmel_cs.o
 
+obj-$(CONFIG_PRISM54)		+= prism54/
+
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
 obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o

drivers/net/wireless/prism54/Makefile

+# $Id: Makefile.k26,v 1.7 2004/01/30 16:24:00 ajfa Exp $
+
+prism54-objs := islpci_eth.o islpci_mgt.o \
+                isl_38xx.o isl_ioctl.o islpci_dev.o \
+		islpci_hotplug.o oid_mgt.o
+
+obj-$(CONFIG_PRISM54) += prism54.o
+
+EXTRA_CFLAGS = -I$(PWD) #-DCONFIG_PRISM54_WDS
+

drivers/net/wireless/prism54/isl_38xx.h

+/*  $Header: /var/lib/cvs/prism54-ng/ksrc/isl_38xx.h,v 1.22 2004/02/28 03:06:07 mcgrof Exp $
+ *  
+ *  Copyright (C) 2002 Intersil Americas Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ISL_38XX_H
+#define _ISL_38XX_H
+
+#include <linux/version.h>
+#include <asm/io.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,75))
+#include <linux/device.h>
+# define _REQ_FW_DEV_T struct device *
+#else
+# define _REQ_FW_DEV_T char *
+#endif
+
+#include <asm/byteorder.h>
+
+#define ISL38XX_CB_RX_QSIZE                     8
+#define ISL38XX_CB_TX_QSIZE                     32
+
+/* ISL38XX Access Point Specific definitions */
+#define ISL38XX_MAX_WDS_LINKS                   8
+
+/* ISL38xx Client Specific definitions */
+#define ISL38XX_PSM_ACTIVE_STATE                0
+#define ISL38XX_PSM_POWERSAVE_STATE             1
+
+/* ISL38XX Host Interface Definitions */
+#define ISL38XX_PCI_MEM_SIZE                    0x02000
+#define ISL38XX_MEMORY_WINDOW_SIZE              0x01000
+#define ISL38XX_DEV_FIRMWARE_ADDRES             0x20000
+#define ISL38XX_WRITEIO_DELAY                   10	/* in us */
+#define ISL38XX_RESET_DELAY                     50	/* in ms */
+#define ISL38XX_WAIT_CYCLE                      10	/* in 10ms */
+#define ISL38XX_MAX_WAIT_CYCLES                 10
+
+/* PCI Memory Area */
+#define ISL38XX_HARDWARE_REG                    0x0000
+#define ISL38XX_CARDBUS_CIS                     0x0800
+#define ISL38XX_DIRECT_MEM_WIN                  0x1000
+
+/* Hardware registers */
+#define ISL38XX_DEV_INT_REG                     0x0000
+#define ISL38XX_INT_IDENT_REG                   0x0010
+#define ISL38XX_INT_ACK_REG                     0x0014
+#define ISL38XX_INT_EN_REG                      0x0018
+#define ISL38XX_GEN_PURP_COM_REG_1              0x0020
+#define ISL38XX_GEN_PURP_COM_REG_2              0x0024
+#define ISL38XX_CTRL_BLK_BASE_REG               ISL38XX_GEN_PURP_COM_REG_1
+#define ISL38XX_DIR_MEM_BASE_REG                0x0030
+#define ISL38XX_CTRL_STAT_REG                   0x0078
+
+/* High end mobos queue up pci writes, the following
+ * is used to "read" from after a write to force flush */
+#define ISL38XX_PCI_POSTING_FLUSH		ISL38XX_INT_EN_REG
+
+/**
+ * isl38xx_w32_flush - PCI iomem write helper
+ * @base: (host) memory base address of the device
+ * @val: 32bit value (host order) to write
+ * @offset: byte offset into @base to write value to
+ * 
+ *  This helper takes care of writing a 32bit datum to the
+ *  specified offset into the device's pci memory space, and making sure 
+ *  the pci memory buffers get flushed by performing one harmless read 
+ *  from the %ISL38XX_PCI_POSTING_FLUSH offset.
+ */
+static inline void
+isl38xx_w32_flush(void *base, u32 val, unsigned long offset)
+{
+	writel(val, base + offset);
+	(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
+}
+
+/* Device Interrupt register bits */
+#define ISL38XX_DEV_INT_RESET                   0x0001
+#define ISL38XX_DEV_INT_UPDATE                  0x0002
+#define ISL38XX_DEV_INT_WAKEUP                  0x0008
+#define ISL38XX_DEV_INT_SLEEP                   0x0010
+
+/* Interrupt Identification/Acknowledge/Enable register bits */
+#define ISL38XX_INT_IDENT_UPDATE                0x0002
+#define ISL38XX_INT_IDENT_INIT                  0x0004
+#define ISL38XX_INT_IDENT_WAKEUP                0x0008
+#define ISL38XX_INT_IDENT_SLEEP                 0x0010
+#define ISL38XX_INT_SOURCES                     0x001E
+
+/* Control/Status register bits */
+#define ISL38XX_CTRL_STAT_SLEEPMODE             0x00000200
+#define	ISL38XX_CTRL_STAT_CLKRUN		0x00800000
+#define ISL38XX_CTRL_STAT_RESET                 0x10000000
+#define ISL38XX_CTRL_STAT_RAMBOOT               0x20000000
+#define ISL38XX_CTRL_STAT_STARTHALTED           0x40000000
+#define ISL38XX_CTRL_STAT_HOST_OVERRIDE         0x80000000
+
+/* Control Block definitions */
+#define ISL38XX_CB_RX_DATA_LQ                   0
+#define ISL38XX_CB_TX_DATA_LQ                   1
+#define ISL38XX_CB_RX_DATA_HQ                   2
+#define ISL38XX_CB_TX_DATA_HQ                   3
+#define ISL38XX_CB_RX_MGMTQ                     4
+#define ISL38XX_CB_TX_MGMTQ                     5
+#define ISL38XX_CB_QCOUNT                       6
+#define ISL38XX_CB_MGMT_QSIZE                   4
+#define ISL38XX_MIN_QTHRESHOLD                  4	/* fragments */
+
+/* Memory Manager definitions */
+#define MGMT_FRAME_SIZE                         1500	/* >= size struct obj_bsslist */
+#define MGMT_TX_FRAME_COUNT                     24	/* max 4 + spare 4 + 8 init */
+#define MGMT_RX_FRAME_COUNT                     24	/* 4*4 + spare 8 */
+#define MGMT_FRAME_COUNT                        (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
+#define CONTROL_BLOCK_SIZE                      1024	/* should be enough */
+#define PSM_FRAME_SIZE                          1536
+#define PSM_MINIMAL_STATION_COUNT               64
+#define PSM_FRAME_COUNT                         PSM_MINIMAL_STATION_COUNT
+#define PSM_BUFFER_SIZE                         PSM_FRAME_SIZE * PSM_FRAME_COUNT
+#define MAX_TRAP_RX_QUEUE                       4
+#define HOST_MEM_BLOCK                          CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
+
+/* Fragment package definitions */
+#define FRAGMENT_FLAG_MF                        0x0001
+#define MAX_FRAGMENT_SIZE                       1536
+
+/* In monitor mode frames have a header. I don't know exactly how big those
+ * frame can be but I've never seen any frame bigger than 1584... :
+ */
+#define MAX_FRAGMENT_SIZE_RX	                1600
+
+typedef struct {
+	u32 address;		/* physical address on host */
+	u16 size;		/* packet size */
+	u16 flags;		/* set of bit-wise flags */
+} isl38xx_fragment;
+
+struct isl38xx_cb {
+	u32 driver_curr_frag[ISL38XX_CB_QCOUNT];
+	u32 device_curr_frag[ISL38XX_CB_QCOUNT];
+	isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
+	isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
+	isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
+	isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
+	isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
+	isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
+};
+
+typedef struct isl38xx_cb isl38xx_control_block;
+
+/* determine number of entries currently in queue */
+int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
+
+void isl38xx_disable_interrupts(void *);
+void isl38xx_enable_common_interrupts(void *);
+
+void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
+				  void *);
+void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void *);
+void isl38xx_trigger_device(int, void *);
+void isl38xx_interface_reset(void *, dma_addr_t);
+
+int isl38xx_upload_firmware(char *, _REQ_FW_DEV_T, void *, dma_addr_t);
+
+#endif				/* _ISL_38XX_H */

drivers/net/wireless/prism54/isl_ioctl.h

+/*  $Header: /var/lib/cvs/prism54-ng/ksrc/isl_ioctl.h,v 1.30 2004/01/30 16:24:00 ajfa Exp $
+ *  
+ *  Copyright (C) 2002 Intersil Americas Inc.
+ *            (C) 2003 Aurelien Alleaume <slts@free.fr>
+ *            (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ISL_IOCTL_H
+#define _ISL_IOCTL_H
+
+#include "islpci_mgt.h"
+#include "islpci_dev.h"
+
+#include <net/iw_handler.h>	/* New driver API */
+
+#define SUPPORTED_WIRELESS_EXT                  16
+
+void prism54_mib_init(islpci_private *);
+void prism54_mib_init_work(islpci_private *);
+
+struct iw_statistics *prism54_get_wireless_stats(struct net_device *);
+void prism54_update_stats(islpci_private *);
+
+void prism54_acl_init(struct islpci_acl *);
+void prism54_acl_clean(struct islpci_acl *);
+
+void prism54_process_trap(void *);
+
+void prism54_wpa_ie_init(islpci_private *priv);
+void prism54_wpa_ie_clean(islpci_private *priv);
+void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
+			u8 *wpa_ie, size_t wpa_ie_len);
+size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie);
+
+int prism54_set_mac_address(struct net_device *, void *);
+
+int prism54_ioctl(struct net_device *, struct ifreq *, int);
+
+extern const struct iw_handler_def prism54_handler_def;
+
+#endif				/* _ISL_IOCTL_H */

drivers/net/wireless/prism54/isl_oid.h

+/*
+ *  $Id: isl_oid.h,v 1.2 2004/01/30 16:24:00 ajfa Exp $
+ *  
+ *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#if !defined(_ISL_OID_H)
+#define _ISL_OID_H
+
+/* 
+ * MIB related constant and structure definitions for communicating
+ * with the device firmware
+ */
+
+struct obj_ssid {
+	u8 length;
+	char octets[33];
+} __attribute__ ((packed));
+
+struct obj_key {
+	u8 type;		/* dot11_priv_t */
+	u8 length;
+	char key[32];
+} __attribute__ ((packed));
+
+struct obj_mlme {
+	u8 address[6];
+	u16 id;
+	u16 state;
+	u16 code;
+} __attribute__ ((packed));
+
+struct obj_mlmeex {
+	u8 address[6];
+	u16 id;
+	u16 state;
+	u16 code;
+	u16 size;
+	u8 data[0];
+} __attribute__ ((packed));
+
+struct obj_buffer {
+	u32 size;
+	u32 addr;		/* 32bit bus address */
+} __attribute__ ((packed));
+
+struct obj_bss {
+	u8 address[6];
+	int:16;			/* padding */
+
+	char state;
+	char reserved;
+	short age;
+
+	char quality;
+	char rssi;
+
+	struct obj_ssid ssid;
+	short channel;
+	char beacon_period;
+	char dtim_period;
+	short capinfo;
+	short rates;
+	short basic_rates;
+	int:16;			/* padding */
+} __attribute__ ((packed));
+
+struct obj_bsslist {
+	u32 nr;
+	struct obj_bss bsslist[0];
+} __attribute__ ((packed));
+
+struct obj_frequencies {
+	u16 nr;
+	u16 mhz[0];
+} __attribute__ ((packed));
+
+/* 
+ * in case everything's ok, the inlined function below will be
+ * optimized away by the compiler...
+ */
+static inline void
+__bug_on_wrong_struct_sizes(void)
+{
+	BUG_ON(sizeof (struct obj_ssid) != 34);
+	BUG_ON(sizeof (struct obj_key) != 34);
+	BUG_ON(sizeof (struct obj_mlme) != 12);
+	BUG_ON(sizeof (struct obj_mlmeex) != 14);
+	BUG_ON(sizeof (struct obj_buffer) != 8);
+	BUG_ON(sizeof (struct obj_bss) != 60);
+	BUG_ON(sizeof (struct obj_bsslist) != 4);
+	BUG_ON(sizeof (struct obj_frequencies) != 2);
+}
+
+enum dot11_state_t {
+	DOT11_STATE_NONE = 0,
+	DOT11_STATE_AUTHING = 1,
+	DOT11_STATE_AUTH = 2,
+	DOT11_STATE_ASSOCING = 3,
+
+	DOT11_STATE_ASSOC = 5,
+	DOT11_STATE_IBSS = 6,
+	DOT11_STATE_WDS = 7
+};
+
+enum dot11_bsstype_t {
+	DOT11_BSSTYPE_NONE = 0,
+	DOT11_BSSTYPE_INFRA = 1,
+	DOT11_BSSTYPE_IBSS = 2,
+	DOT11_BSSTYPE_ANY = 3
+};
+
+enum dot11_auth_t {
+	DOT11_AUTH_NONE = 0,
+	DOT11_AUTH_OS = 1,
+	DOT11_AUTH_SK = 2,
+	DOT11_AUTH_BOTH = 3
+};
+
+enum dot11_mlme_t {
+	DOT11_MLME_AUTO = 0,
+	DOT11_MLME_INTERMEDIATE = 1,
+	DOT11_MLME_EXTENDED = 2
+};
+
+enum dot11_priv_t {
+	DOT11_PRIV_WEP = 0,
+	DOT11_PRIV_TKIP = 1
+};
+
+/* The dot11d conformance level configures the 802.11d conformance levels.
+ * The following conformance levels exist:*/
+enum oid_inl_conformance_t {
+	OID_INL_CONFORMANCE_NONE = 0,	/* Perform active scanning */
+	OID_INL_CONFORMANCE_STRICT = 1,	/* Strictly adhere to 802.11d */
+	OID_INL_CONFORMANCE_FLEXIBLE = 2,	/* Use passed 802.11d info to
+						 * determine channel AND/OR just make 
+						 * assumption that active 
+						 * channels are valid  channels */
+};
+
+enum oid_inl_mode_t {
+	INL_MODE_NONE = -1,
+	INL_MODE_PROMISCUOUS = 0,
+	INL_MODE_CLIENT = 1,
+	INL_MODE_AP = 2,
+	INL_MODE_SNIFFER = 3
+};
+
+enum oid_inl_config_t {
+	INL_CONFIG_NOTHING = 0x00,
+	INL_CONFIG_MANUALRUN = 0x01,
+	INL_CONFIG_FRAMETRAP = 0x02,
+	INL_CONFIG_RXANNEX = 0x04,
+	INL_CONFIG_TXANNEX = 0x08,
+	INL_CONFIG_WDS = 0x10
+};
+
+enum oid_inl_phycap_t {
+	INL_PHYCAP_2400MHZ = 1,
+	INL_PHYCAP_5000MHZ = 2,
+	INL_PHYCAP_FAA = 0x80000000,	/* Means card supports the FAA switch */
+};
+
+enum oid_num_t {
+	GEN_OID_MACADDRESS = 0,
+	GEN_OID_LINKSTATE,
+	GEN_OID_WATCHDOG,
+	GEN_OID_MIBOP,
+	GEN_OID_OPTIONS,
+	GEN_OID_LEDCONFIG,
+
+	/* 802.11 */
+	DOT11_OID_BSSTYPE,
+	DOT11_OID_BSSID,
+	DOT11_OID_SSID,
+	DOT11_OID_STATE,
+	DOT11_OID_AID,
+	DOT11_OID_COUNTRYSTRING,
+	DOT11_OID_SSIDOVERRIDE,
+
+	DOT11_OID_MEDIUMLIMIT,
+	DOT11_OID_BEACONPERIOD,
+	DOT11_OID_DTIMPERIOD,
+	DOT11_OID_ATIMWINDOW,
+	DOT11_OID_LISTENINTERVAL,
+	DOT11_OID_CFPPERIOD,
+	DOT11_OID_CFPDURATION,
+
+	DOT11_OID_AUTHENABLE,
+	DOT11_OID_PRIVACYINVOKED,
+	DOT11_OID_EXUNENCRYPTED,
+	DOT11_OID_DEFKEYID,
+	DOT11_OID_DEFKEYX,	/* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
+	DOT11_OID_STAKEY,
+	DOT11_OID_REKEYTHRESHOLD,
+	DOT11_OID_STASC,
+
+	DOT11_OID_PRIVTXREJECTED,
+	DOT11_OID_PRIVRXPLAIN,
+	DOT11_OID_PRIVRXFAILED,
+	DOT11_OID_PRIVRXNOKEY,
+
+	DOT11_OID_RTSTHRESH,
+	DOT11_OID_FRAGTHRESH,
+	DOT11_OID_SHORTRETRIES,
+	DOT11_OID_LONGRETRIES,
+	DOT11_OID_MAXTXLIFETIME,
+	DOT11_OID_MAXRXLIFETIME,
+	DOT11_OID_AUTHRESPTIMEOUT,
+	DOT11_OID_ASSOCRESPTIMEOUT,
+
+	DOT11_OID_ALOFT_TABLE,
+	DOT11_OID_ALOFT_CTRL_TABLE,
+	DOT11_OID_ALOFT_RETREAT,
+	DOT11_OID_ALOFT_PROGRESS,
+	DOT11_OID_ALOFT_FIXEDRATE,
+	DOT11_OID_ALOFT_RSSIGRAPH,
+	DOT11_OID_ALOFT_CONFIG,
+
+	DOT11_OID_VDCFX,
+	DOT11_OID_MAXFRAMEBURST,
+
+	DOT11_OID_PSM,
+	DOT11_OID_CAMTIMEOUT,
+	DOT11_OID_RECEIVEDTIMS,
+	DOT11_OID_ROAMPREFERENCE,
+
+	DOT11_OID_BRIDGELOCAL,
+	DOT11_OID_CLIENTS,
+	DOT11_OID_CLIENTSASSOCIATED,
+	DOT11_OID_CLIENTX,	/* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
+
+	DOT11_OID_CLIENTFIND,
+	DOT11_OID_WDSLINKADD,
+	DOT11_OID_WDSLINKREMOVE,
+	DOT11_OID_EAPAUTHSTA,
+	DOT11_OID_EAPUNAUTHSTA,
+	DOT11_OID_DOT1XENABLE,
+	DOT11_OID_MICFAILURE,
+	DOT11_OID_REKEYINDICATE,
+
+	DOT11_OID_MPDUTXSUCCESSFUL,
+	DOT11_OID_MPDUTXONERETRY,
+	DOT11_OID_MPDUTXMULTIPLERETRIES,
+	DOT11_OID_MPDUTXFAILED,
+	DOT11_OID_MPDURXSUCCESSFUL,
+	DOT11_OID_MPDURXDUPS,
+	DOT11_OID_RTSSUCCESSFUL,
+	DOT11_OID_RTSFAILED,
+	DOT11_OID_ACKFAILED,
+	DOT11_OID_FRAMERECEIVES,
+	DOT11_OID_FRAMEERRORS,
+	DOT11_OID_FRAMEABORTS,
+	DOT11_OID_FRAMEABORTSPHY,
+
+	DOT11_OID_SLOTTIME,
+	DOT11_OID_CWMIN,
+	DOT11_OID_CWMAX,
+	DOT11_OID_ACKWINDOW,
+	DOT11_OID_ANTENNARX,
+	DOT11_OID_ANTENNATX,
+	DOT11_OID_ANTENNADIVERSITY,
+	DOT11_OID_CHANNEL,
+	DOT11_OID_EDTHRESHOLD,
+	DOT11_OID_PREAMBLESETTINGS,
+	DOT11_OID_RATES,
+	DOT11_OID_CCAMODESUPPORTED,
+	DOT11_OID_CCAMODE,
+	DOT11_OID_RSSIVECTOR,
+	DOT11_OID_OUTPUTPOWERTABLE,
+	DOT11_OID_OUTPUTPOWER,
+	DOT11_OID_SUPPORTEDRATES,
+	DOT11_OID_FREQUENCY,
+	DOT11_OID_SUPPORTEDFREQUENCIES,
+	DOT11_OID_NOISEFLOOR,
+	DOT11_OID_FREQUENCYACTIVITY,
+	DOT11_OID_IQCALIBRATIONTABLE,
+	DOT11_OID_NONERPPROTECTION,
+	DOT11_OID_SLOTSETTINGS,
+	DOT11_OID_NONERPTIMEOUT,
+	DOT11_OID_PROFILES,
+	DOT11_OID_EXTENDEDRATES,
+
+	DOT11_OID_DEAUTHENTICATE,
+	DOT11_OID_AUTHENTICATE,
+	DOT11_OID_DISASSOCIATE,
+	DOT11_OID_ASSOCIATE,
+	DOT11_OID_SCAN,
+	DOT11_OID_BEACON,
+	DOT11_OID_PROBE,
+	DOT11_OID_DEAUTHENTICATEEX,
+	DOT11_OID_AUTHENTICATEEX,
+	DOT11_OID_DISASSOCIATEEX,
+	DOT11_OID_ASSOCIATEEX,
+	DOT11_OID_REASSOCIATE,
+	DOT11_OID_REASSOCIATEEX,
+
+	DOT11_OID_NONERPSTATUS,
+
+	DOT11_OID_STATIMEOUT,
+	DOT11_OID_MLMEAUTOLEVEL,
+	DOT11_OID_BSSTIMEOUT,
+	DOT11_OID_ATTACHMENT,
+	DOT11_OID_PSMBUFFER,
+
+	DOT11_OID_BSSS,
+	DOT11_OID_BSSX,		/*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
+	DOT11_OID_BSSFIND,
+	DOT11_OID_BSSLIST,
+
+	OID_INL_TUNNEL,
+	OID_INL_MEMADDR,
+	OID_INL_MEMORY,
+	OID_INL_MODE,
+	OID_INL_COMPONENT_NR,
+	OID_INL_VERSION,
+	OID_INL_INTERFACE_ID,
+	OID_INL_COMPONENT_ID,
+	OID_INL_CONFIG,
+	OID_INL_DOT11D_CONFORMANCE,
+	OID_INL_PHYCAPABILITIES,
+	OID_INL_OUTPUTPOWER,
+
+	OID_NUM_LAST
+};
+
+/* We  could add more flags. eg: in which mode are they allowed, ro, rw, ...*/
+#define OID_FLAG_CACHED	0x01
+#define OID_FLAG_U32	0x02
+#define OID_FLAG_MLMEEX	0x04	/* this type is special because of a variable
+				   size field when sending. Not yet implemented (not used in driver). */
+
+struct oid_t {
+	enum oid_num_t oid;
+	short range;		/* to define a range of oid */
+	short size;		/* size of the associated data */
+	char flags;
+};
+
+union oid_res_t {
+	void *ptr;
+	u32 u;
+};
+
+#define	IWMAX_BITRATES	20
+#define	IWMAX_BSS	24
+#define IWMAX_FREQ	30
+
+#endif				/* !defined(_ISL_OID_H) */
+/* EOF */

drivers/net/wireless/prism54/islpci_dev.h

+/*  $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_dev.h,v 1.53 2004/02/28 03:06:07 mcgrof Exp $
+ *  
+ *  Copyright (C) 2002 Intersil Americas Inc. 
+ *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ISLPCI_DEV_H
+#define _ISLPCI_DEV_H
+
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/list.h>
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
+# include <linux/workqueue.h>
+#else
+# include <linux/tqueue.h>
+# define work_struct tq_struct
+# define INIT_WORK INIT_TQUEUE
+# define schedule_work schedule_task
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23)
+#define free_netdev(x) kfree(x) 
+#define pci_name(x) x->slot_name 
+#endif
+
+#include "isl_38xx.h"
+#include "isl_oid.h"
+#include "islpci_mgt.h"
+
+/* some states might not be superflous and may be removed when
+   design is finalized (hvr) */
+typedef enum {
+	PRV_STATE_OFF = 0,	/* this means hw_unavailable is != 0 */
+	PRV_STATE_PREBOOT,	/* we are in a pre-boot state (empty RAM) */
+	PRV_STATE_BOOT,		/* boot state (fw upload, run fw) */
+	PRV_STATE_POSTBOOT,	/* after boot state, need reset now */
+	PRV_STATE_PREINIT,	/* pre-init state */
+	PRV_STATE_INIT,		/* init state (restore MIB backup to device) */
+	PRV_STATE_READY,	/* driver&device are in operational state */
+	PRV_STATE_SLEEP		/* device in sleep mode */
+} islpci_state_t;
+
+/* ACL using MAC address */
+struct mac_entry {
+   struct list_head _list;
+   char addr[ETH_ALEN];
+};
+
+struct islpci_acl {
+   enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
+   struct list_head mac_list;  /* a list of mac_entry */
+   int size;   /* size of queue */
+   struct semaphore sem;   /* accessed in ioctls and trap_work */
+};
+
+struct islpci_membuf {
+	int size;                   /* size of memory */
+	void *mem;                  /* address of memory as seen by CPU */
+	dma_addr_t pci_addr;        /* address of memory as seen by device */
+};
+
+#define MAX_BSS_WPA_IE_COUNT 64
+#define MAX_WPA_IE_LEN 64
+struct islpci_bss_wpa_ie {
+	struct list_head list;
+	unsigned long last_update;
+	u8 bssid[ETH_ALEN];
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	
+};
+
+typedef struct {
+	spinlock_t slock;	/* generic spinlock; */
+	
+	u32 priv_oid;
+
+	/* our mib cache */
+	u32 iw_mode;
+        struct rw_semaphore mib_sem;
+	void **mib;
+	char nickname[IW_ESSID_MAX_SIZE+1];
+	
+	/* Take care of the wireless stats */
+	struct work_struct stats_work;
+	struct semaphore stats_sem;
+	/* remember when we last updated the stats */
+	unsigned long stats_timestamp;
+	/* The first is accessed under semaphore locking.
+	 * The second is the clean one we return to iwconfig.
+	 */
+	struct iw_statistics local_iwstatistics;
+	struct iw_statistics iwstatistics;
+
+	struct islpci_acl acl;
+
+	/* PCI bus allocation & configuration members */
+	struct pci_dev *pdev;	/* PCI structure information */
+	u32 pci_state[16];	/* used for suspend/resume */
+	char firmware[33];
+
+	void *device_base;	/* ioremapped device base address */
+
+	/* consistent DMA region */
+	void *driver_mem_address;	/* base DMA address */
+	dma_addr_t device_host_address;	/* base DMA address (bus address) */
+	dma_addr_t device_psm_buffer;	/* host memory for PSM buffering (bus address) */
+
+	/* our network_device structure  */
+	struct net_device *ndev;
+
+	/* device queue interface members */
+	struct isl38xx_cb *control_block;	/* device control block 
+							   (== driver_mem_address!) */
+
+	/* Each queue has three indexes:
+	 *   free/index_mgmt/data_rx/tx (called index, see below),
+	 *   driver_curr_frag, and device_curr_frag (in the control block)
+	 * All indexes are ever-increasing, but interpreted modulo the
+	 * device queue size when used.
+	 *   index <= device_curr_frag <= driver_curr_frag  at all times
+	 * For rx queues, [index, device_curr_frag) contains fragments
+	 * that the interrupt processing needs to handle (owned by driver).
+	 * [device_curr_frag, driver_curr_frag) is the free space in the
+	 * rx queue, waiting for data (owned by device).  The driver
+	 * increments driver_curr_frag to indicate to the device that more
+	 * buffers are available.
+	 * If device_curr_frag == driver_curr_frag, no more rx buffers are
+	 * available, and the rx DMA engine of the device is halted.
+	 * For tx queues, [index, device_curr_frag) contains fragments
+	 * where tx is done; they need to be freed (owned by driver).
+	 * [device_curr_frag, driver_curr_frag) contains the frames
+	 * that are being transferred (owned by device).  The driver
+	 * increments driver_curr_frag to indicate that more tx work
+	 * needs to be done.
+	 */
+	u32 index_mgmt_rx;              /* real index mgmt rx queue */
+	u32 index_mgmt_tx;              /* read index mgmt tx queue */
+	u32 free_data_rx;	/* free pointer data rx queue */
+	u32 free_data_tx;	/* free pointer data tx queue */
+	u32 data_low_tx_full;	/* full detected flag */
+
+	/* frame memory buffers for the device queues */
+	struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
+	struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
+	struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
+	struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
+	dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
+	dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
+
+	/* driver network interface members */
+	struct net_device_stats statistics;
+
+	/* wait for a reset interrupt */
+	wait_queue_head_t reset_done;
+
+	/* used by islpci_mgt_transaction */
+	struct semaphore mgmt_sem; /* serialize access to mailbox and wqueue */
+	struct islpci_mgmtframe *mgmt_received;	  /* mbox for incoming frame */
+	wait_queue_head_t mgmt_wqueue;            /* waitqueue for mbox */
+
+	/* state machine */
+	islpci_state_t state;
+	int state_off;		/* enumeration of off-state, if 0 then
+				 * we're not in any off-state */
+	
+	/* WPA stuff */
+	int wpa; /* WPA mode enabled */
+	struct list_head bss_wpa_list;
+	int num_bss_wpa;
+	struct semaphore wpa_sem;
+} islpci_private;
+
+static inline islpci_state_t
+islpci_get_state(islpci_private *priv)
+{
+	/* lock */
+	return priv->state;
+	/* unlock */
+}
+
+islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
+
+#define ISLPCI_TX_TIMEOUT               (2*HZ)
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,75))
+# define irqreturn_t void
+# define IRQ_HANDLED
+# define IRQ_NONE
+#endif
+
+irqreturn_t islpci_interrupt(int, void *, struct pt_regs *);
+
+int prism54_post_setup(islpci_private *, int);
+int islpci_reset(islpci_private *, int);
+
+static inline void
+islpci_trigger(islpci_private *priv)
+{
+	isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
+			       priv->device_base);
+}
+
+struct net_device_stats *islpci_statistics(struct net_device *);
+
+int prism54_bring_down(islpci_private *);
+int islpci_alloc_memory(islpci_private *);
+int islpci_free_memory(islpci_private *);
+struct net_device *islpci_setup(struct pci_dev *);
+#endif				/* _ISLPCI_DEV_H */

drivers/net/wireless/prism54/islpci_eth.h

+/*  $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_eth.h,v 1.5 2004/01/12 22:16:32 jmaurer Exp $
+ *  
+ *  Copyright (C) 2002 Intersil Americas Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ISLPCI_ETH_H
+#define _ISLPCI_ETH_H
+
+#include "isl_38xx.h"
+#include "islpci_dev.h"
+
+void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *);
+int islpci_eth_transmit(struct sk_buff *, struct net_device *);
+int islpci_eth_receive(islpci_private *);
+void islpci_eth_tx_timeout(struct net_device *);
+
+#endif				/* _ISL_GEN_H */

drivers/net/wireless/prism54/islpci_mgt.h

+/*  $Header: /var/lib/cvs/prism54-ng/ksrc/islpci_mgt.h,v 1.22 2004/01/30 16:24:00 ajfa Exp $
+ *  
+ *  Copyright (C) 2002 Intersil Americas Inc.
+ *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ISLPCI_MGT_H
+#define _ISLPCI_MGT_H
+
+#include <linux/wireless.h>
+#include <linux/skbuff.h>
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
+# include <linux/workqueue.h>
+#else
+# include <linux/tqueue.h>
+# define work_struct tq_struct
+# define INIT_WORK INIT_TQUEUE
+# define schedule_work schedule_task
+#endif
+
+/*
+ *  Function definitions
+ */
+
+#define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0)
+#define DEBUG(f, args...) K_DEBUG(f, pc_debug, args)
+
+#define TRACE(devname)   K_DEBUG(SHOW_TRACING, VERBOSE, "%s:  -> " __FUNCTION__ "()\n", devname)
+
+extern int pc_debug;
+static const int init_wds = 0;	/* help compiler optimize away dead code */
+
+
+/* General driver definitions */
+#define PCIVENDOR_INTERSIL                      0x1260UL
+#define PCIVENDOR_3COM				0x10b7UL
+#define PCIVENDOR_DLINK				0x1186UL
+#define PCIVENDOR_I4				0x17cfUL
+#define PCIVENDOR_IODATA			0x10fcUL
+#define PCIVENDOR_NETGEAR			0x1385UL
+#define PCIVENDOR_SMC				0x10b8UL
+#define PCIVENDOR_ACCTON			0x1113UL
+
+#define PCIDEVICE_ISL3877                       0x3877UL
+#define PCIDEVICE_ISL3890                       0x3890UL
+#define	PCIDEVICE_3COM6001			0x6001UL
+#define PCIDEVICE_LATENCY_TIMER_MIN 		0x40
+#define PCIDEVICE_LATENCY_TIMER_VAL 		0x50
+
+/* Debugging verbose definitions */
+#define SHOW_NOTHING                            0x00	/* overrules everything */
+#define SHOW_ANYTHING                           0xFF
+#define SHOW_ERROR_MESSAGES                     0x01
+#define SHOW_TRAPS                              0x02
+#define SHOW_FUNCTION_CALLS                     0x04
+#define SHOW_TRACING                            0x08
+#define SHOW_QUEUE_INDEXES                      0x10
+#define SHOW_PIMFOR_FRAMES                      0x20
+#define SHOW_BUFFER_CONTENTS                    0x40
+#define VERBOSE                                 0x01
+
+/* Default card definitions */
+#define CARD_DEFAULT_CHANNEL                    6
+#define CARD_DEFAULT_MODE                       INL_MODE_CLIENT
+#define CARD_DEFAULT_IW_MODE			IW_MODE_INFRA
+#define CARD_DEFAULT_BSSTYPE                    DOT11_BSSTYPE_INFRA
+#define CARD_DEFAULT_CLIENT_SSID		""
+#define CARD_DEFAULT_AP_SSID			"default"
+#define CARD_DEFAULT_KEY1                       "default_key_1"
+#define CARD_DEFAULT_KEY2                       "default_key_2"
+#define CARD_DEFAULT_KEY3                       "default_key_3"
+#define CARD_DEFAULT_KEY4                       "default_key_4"
+#define CARD_DEFAULT_WEP                        0
+#define CARD_DEFAULT_FILTER                     0
+# define CARD_DEFAULT_WDS                        0
+#define	CARD_DEFAULT_AUTHEN                     DOT11_AUTH_OS
+#define	CARD_DEFAULT_DOT1X			0
+#define CARD_DEFAULT_MLME_MODE			DOT11_MLME_AUTO
+#define CARD_DEFAULT_CONFORMANCE                OID_INL_CONFORMANCE_NONE
+
+/* PIMFOR package definitions */
+#define PIMFOR_ETHERTYPE                        0x8828
+#define PIMFOR_HEADER_SIZE                      12
+#define PIMFOR_VERSION                          1
+#define PIMFOR_OP_GET                           0
+#define PIMFOR_OP_SET                           1
+#define PIMFOR_OP_RESPONSE                      2
+#define PIMFOR_OP_ERROR                         3
+#define PIMFOR_OP_TRAP                          4
+#define PIMFOR_OP_RESERVED                      5	/* till 255 */
+#define PIMFOR_DEV_ID_MHLI_MIB                  0
+#define PIMFOR_FLAG_APPLIC_ORIGIN               0x01
+#define PIMFOR_FLAG_LITTLE_ENDIAN               0x02
+
+static inline void
+add_le32p(u32 * le_number, u32 add)
+{
+	*le_number = cpu_to_le32(le32_to_cpup(le_number) + add);
+}
+
+void display_buffer(char *, int);
+
+/*
+ *  Type definition section
+ *
+ *  the structure defines only the header allowing copyless
+ *  frame handling
+ */
+typedef struct {
+	u8 version;
+	u8 operation;
+	u32 oid;
+	u8 device_id;
+	u8 flags;
+	u32 length;
+} __attribute__ ((packed))
+pimfor_header_t;
+
+/* A received and interrupt-processed management frame, either for
+ * schedule_work(prism54_process_trap) or for priv->mgmt_received,
+ * processed by islpci_mgt_transaction(). */
+struct islpci_mgmtframe {
+	struct net_device *ndev;      /* pointer to network device */
+	pimfor_header_t *header;      /* payload header, points into buf */
+	void *data;		      /* payload ex header, points into buf */
+        struct work_struct ws;	      /* argument for schedule_work() */
+	char buf[0];		      /* fragment buffer */
+};
+
+int
+islpci_mgt_receive(struct net_device *ndev);
+
+int
+islpci_mgmt_rx_fill(struct net_device *ndev);
+
+void
+islpci_mgt_cleanup_transmit(struct net_device *ndev);
+
+int
+islpci_mgt_transaction(struct net_device *ndev,
+                       int operation, unsigned long oid,
+		       void *senddata, int sendlen,
+		       struct islpci_mgmtframe **recvframe);
+
+static inline void
+islpci_mgt_release(struct islpci_mgmtframe *frame)
+{
+        kfree(frame);
+}
+
+#endif				/* _ISLPCI_MGT_H */

drivers/net/wireless/prism54/oid_mgt.h

+/*   
+ *  Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#if !defined(_OID_MGT_H)
+#define _OID_MGT_H
+
+#include "isl_oid.h"
+#include "islpci_dev.h"
+
+extern struct oid_t isl_oid[];
+
+int mgt_init(islpci_private *);
+
+void mgt_clean(islpci_private *);
+
+extern const int frequency_list_bg[];
+
+extern const int frequency_list_a[];
+
+int mgt_set_request(islpci_private *, enum oid_num_t, int, void *);
+
+int mgt_get_request(islpci_private *, enum oid_num_t, int, void *,
+                    union oid_res_t *);
+
+int mgt_commit_list(islpci_private *, enum oid_num_t *, int);
+
+void mgt_set(islpci_private *, enum oid_num_t, void *);
+
+void mgt_commit(islpci_private *);
+
+int mgt_mlme_answer(islpci_private *);
+
+enum oid_num_t mgt_oidtonum(u32 oid);
+
+#endif				/* !defined(_OID_MGT_H) */
+/* EOF */