drm/amd/display: To adjust dprefclk by down spread percentage

[Why]
Panels show corruption with high refresh rate timings when ssc is
enabled.

[How]
Read down-spread percentage from lut to adjust dprefclk. Issues come
from S0i3 with this commit has been fixed by SMU.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c

@@ -87,6 +87,20 @@ static const struct IP_BASE CLK_BASE = { { { { 0x00016C00, 0x02401800, 0, 0, 0,
 #define CLK1_CLK_PLL_REQ__PllSpineDiv_MASK	0x0000F000L
 #define CLK1_CLK_PLL_REQ__FbMult_frac_MASK	0xFFFF0000L
 
+#define regCLK1_CLK2_BYPASS_CNTL			0x029c
+#define regCLK1_CLK2_BYPASS_CNTL_BASE_IDX	0
+
+#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL__SHIFT	0x0
+#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_DIV__SHIFT	0x10
+#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL_MASK		0x00000007L
+#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_DIV_MASK		0x000F0000L
+
+#define regCLK6_0_CLK6_spll_field_8				0x464b
+#define regCLK6_0_CLK6_spll_field_8_BASE_IDX	0
+
+#define CLK6_0_CLK6_spll_field_8__spll_ssc_en__SHIFT	0xd
+#define CLK6_0_CLK6_spll_field_8__spll_ssc_en_MASK		0x00002000L
+
 #define REG(reg_name) \
 	(CLK_BASE.instance[0].segment[reg ## reg_name ## _BASE_IDX] + reg ## reg_name)
 
@@ -160,6 +174,37 @@ static void dcn314_disable_otg_wa(struct clk_mgr *clk_mgr_base, struct dc_state
 	}
 }
 
+bool dcn314_is_spll_ssc_enabled(struct clk_mgr *clk_mgr_base)
+{
+	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
+	uint32_t ssc_enable;
+
+	REG_GET(CLK6_0_CLK6_spll_field_8, spll_ssc_en, &ssc_enable);
+
+	return ssc_enable == 1;
+}
+
+void dcn314_init_clocks(struct clk_mgr *clk_mgr)
+{
+	struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr);
+	uint32_t ref_dtbclk = clk_mgr->clks.ref_dtbclk_khz;
+
+	memset(&(clk_mgr->clks), 0, sizeof(struct dc_clocks));
+	// Assumption is that boot state always supports pstate
+	clk_mgr->clks.ref_dtbclk_khz = ref_dtbclk;	// restore ref_dtbclk
+	clk_mgr->clks.p_state_change_support = true;
+	clk_mgr->clks.prev_p_state_change_support = true;
+	clk_mgr->clks.pwr_state = DCN_PWR_STATE_UNKNOWN;
+	clk_mgr->clks.zstate_support = DCN_ZSTATE_SUPPORT_UNKNOWN;
+
+	// to adjust dp_dto reference clock if ssc is enable otherwise to apply dprefclk
+	if (dcn314_is_spll_ssc_enabled(clk_mgr))
+		clk_mgr->dp_dto_source_clock_in_khz =
+			dce_adjust_dp_ref_freq_for_ss(clk_mgr_int, clk_mgr->dprefclk_khz);
+	else
+		clk_mgr->dp_dto_source_clock_in_khz = clk_mgr->dprefclk_khz;
+}
+
 void dcn314_update_clocks(struct clk_mgr *clk_mgr_base,
 			struct dc_state *context,
 			bool safe_to_lower)
@@ -436,6 +481,11 @@ static DpmClocks314_t dummy_clocks;
 
 static struct dcn314_watermarks dummy_wms = { 0 };
 
+static struct dcn314_ss_info_table ss_info_table = {
+	.ss_divider = 1000,
+	.ss_percentage = {0, 0, 375, 375, 375}
+};
+
 static void dcn314_build_watermark_ranges(struct clk_bw_params *bw_params, struct dcn314_watermarks *table)
 {
 	int i, num_valid_sets;
@@ -708,13 +758,31 @@ static struct clk_mgr_funcs dcn314_funcs = {
 	.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
 	.get_dtb_ref_clk_frequency = dcn31_get_dtb_ref_freq_khz,
 	.update_clocks = dcn314_update_clocks,
-	.init_clocks = dcn31_init_clocks,
+	.init_clocks = dcn314_init_clocks,
 	.enable_pme_wa = dcn314_enable_pme_wa,
 	.are_clock_states_equal = dcn314_are_clock_states_equal,
 	.notify_wm_ranges = dcn314_notify_wm_ranges
 };
 extern struct clk_mgr_funcs dcn3_fpga_funcs;
 
+static void dcn314_read_ss_info_from_lut(struct clk_mgr_internal *clk_mgr)
+{
+	uint32_t clock_source;
+	//uint32_t ssc_enable;
+
+	REG_GET(CLK1_CLK2_BYPASS_CNTL, CLK2_BYPASS_SEL, &clock_source);
+	//REG_GET(CLK6_0_CLK6_spll_field_8, spll_ssc_en, &ssc_enable);
+
+	if (dcn314_is_spll_ssc_enabled(&clk_mgr->base) && (clock_source < ARRAY_SIZE(ss_info_table.ss_percentage))) {
+		clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source];
+
+		if (clk_mgr->dprefclk_ss_percentage != 0) {
+			clk_mgr->ss_on_dprefclk = true;
+			clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider;
+		}
+	}
+}
+
 void dcn314_clk_mgr_construct(
 		struct dc_context *ctx,
 		struct clk_mgr_dcn314 *clk_mgr,
@@ -782,6 +850,7 @@ void dcn314_clk_mgr_construct(
 	clk_mgr->base.base.dprefclk_khz = 600000;
 	clk_mgr->base.base.clks.ref_dtbclk_khz = 600000;
 	dce_clock_read_ss_info(&clk_mgr->base);
+	dcn314_read_ss_info_from_lut(&clk_mgr->base);
 	/*if bios enabled SS, driver needs to adjust dtb clock, only enable with correct bios*/
 
 	clk_mgr->base.base.bw_params = &dcn314_bw_params;

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.h

@@ -28,6 +28,8 @@
 #define __DCN314_CLK_MGR_H__
 #include "clk_mgr_internal.h"
 
+#define DCN314_NUM_CLOCK_SOURCES   5
+
 struct dcn314_watermarks;
 
 struct dcn314_smu_watermark_set {
@@ -40,9 +42,18 @@ struct clk_mgr_dcn314 {
 	struct dcn314_smu_watermark_set smu_wm_set;
 };
 
+struct dcn314_ss_info_table {
+	uint32_t ss_divider;
+	uint32_t ss_percentage[DCN314_NUM_CLOCK_SOURCES];
+};
+
 bool dcn314_are_clock_states_equal(struct dc_clocks *a,
 		struct dc_clocks *b);
 
+bool dcn314_is_spll_ssc_enabled(struct clk_mgr *clk_mgr_base);
+
+void dcn314_init_clocks(struct clk_mgr *clk_mgr);
+
 void dcn314_update_clocks(struct clk_mgr *clk_mgr_base,
 			struct dc_state *context,
 			bool safe_to_lower);

drivers/gpu/drm/amd/display/dc/dce/dce_audio.c

@@ -782,7 +782,7 @@ static void get_azalia_clock_info_dp(
 	/*audio_dto_module = dpDtoSourceClockInkhz * 10,000;
 	 *  [khz] ->[100Hz] */
 	azalia_clock_info->audio_dto_module =
-		pll_info->dp_dto_source_clock_in_khz * 10;
+		pll_info->audio_dto_source_clock_in_khz * 10;
 }
 
 void dce_aud_wall_dto_setup(

drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c

@@ -975,6 +975,9 @@ static bool dcn31_program_pix_clk(
 			look_up_in_video_optimized_rate_tlb(pix_clk_params->requested_pix_clk_100hz / 10);
 	struct bp_pixel_clock_parameters bp_pc_params = {0};
 	enum transmitter_color_depth bp_pc_colour_depth = TRANSMITTER_COLOR_DEPTH_24;
+
+	if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0)
+		dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz;
 	// For these signal types Driver to program DP_DTO without calling VBIOS Command table
 	if (dc_is_dp_signal(pix_clk_params->signal_type) || dc_is_virtual_signal(pix_clk_params->signal_type)) {
 		if (e) {
@@ -1088,6 +1091,10 @@ static bool get_pixel_clk_frequency_100hz(
 	struct dce110_clk_src *clk_src = TO_DCE110_CLK_SRC(clock_source);
 	unsigned int clock_hz = 0;
 	unsigned int modulo_hz = 0;
+	unsigned int dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dprefclk_khz;
+
+	if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0)
+		dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz;
 
 	if (clock_source->id == CLOCK_SOURCE_ID_DP_DTO) {
 		clock_hz = REG_READ(PHASE[inst]);
@@ -1100,7 +1107,7 @@ static bool get_pixel_clk_frequency_100hz(
 			modulo_hz = REG_READ(MODULO[inst]);
 			if (modulo_hz)
 				*pixel_clk_khz = div_u64((uint64_t)clock_hz*
-					clock_source->ctx->dc->clk_mgr->dprefclk_khz*10,
+					dp_dto_ref_khz*10,
 					modulo_hz);
 			else
 				*pixel_clk_khz = 0;

drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c

@@ -1354,7 +1354,7 @@ static void build_audio_output(
 	if (state->clk_mgr &&
 		(pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT ||
 			pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)) {
-		audio_output->pll_info.dp_dto_source_clock_in_khz =
+		audio_output->pll_info.audio_dto_source_clock_in_khz =
 				state->clk_mgr->funcs->get_dp_ref_clk_frequency(
 						state->clk_mgr);
 	}

drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr.h

@@ -333,6 +333,7 @@ struct clk_mgr {
 	bool force_smu_not_present;
 	bool dc_mode_softmax_enabled;
 	int dprefclk_khz; // Used by program pixel clock in clock source funcs, need to figureout where this goes
+	int dp_dto_source_clock_in_khz; // Used to program DP DTO with ss adjustment on DCN314
 	int dentist_vco_freq_khz;
 	struct clk_state_registers_and_bypass boot_snapshot;
 	struct clk_bw_params *bw_params;

drivers/gpu/drm/amd/display/include/audio_types.h

@@ -64,7 +64,7 @@ enum audio_dto_source {
 /* PLL information required for AZALIA DTO calculation */
 
 struct audio_pll_info {
-	uint32_t dp_dto_source_clock_in_khz;
+	uint32_t audio_dto_source_clock_in_khz;
 	uint32_t feed_back_divider;
 	enum audio_dto_source dto_source;
 	bool ss_enabled;