Commit 18094430 authored by Dong Aisheng's avatar Dong Aisheng Committed by Ulf Hansson

mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix

The uSDHC has an ADMA Length Mismatch errata ERR004536 which may
cause ADMA work abnormally. The errata has already been fixed for
i.MX6Q TO1.2 and i.MX6DL TO1.1 by enable the bit 7 in 0x6c register.
Unfortunately this fix is not included in i.MX6SL.
So we disable ADMA for i.MX6SL and use SDMA instead.
Signed-off-by: default avatarDong Aisheng <aisheng.dong@freescale.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent b7321042
......@@ -112,6 +112,12 @@
#define ESDHC_FLAG_STD_TUNING BIT(5)
/* The IP has SDHCI_CAPABILITIES_1 register */
#define ESDHC_FLAG_HAVE_CAP1 BIT(6)
/*
* The IP has errata ERR004536
* uSDHC: ADMA Length Mismatch Error occurs if the AHB read access is slow,
* when reading data from the card
*/
#define ESDHC_FLAG_ERR004536 BIT(7)
struct esdhc_soc_data {
u32 flags;
......@@ -139,7 +145,7 @@ static struct esdhc_soc_data usdhc_imx6q_data = {
static struct esdhc_soc_data usdhc_imx6sl_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1,
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536,
};
struct pltfm_imx_data {
......@@ -991,6 +997,13 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
host->mmc->caps |= MMC_CAP_1_8V_DDR;
/*
* errata ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL
* TO1.1, it's harmless for MX6SL
*/
writel(readl(host->ioaddr + 0x6c) | BIT(7),
host->ioaddr + 0x6c);
}
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
......@@ -1002,6 +1015,9 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP,
host->ioaddr + ESDHC_TUNING_CTRL);
if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
boarddata = &imx_data->boarddata;
if (sdhci_esdhc_imx_probe_dt(pdev, host, boarddata) < 0) {
if (!host->mmc->parent->platform_data) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment