Commit 187e3e06 authored by Paul Walmsley's avatar Paul Walmsley

ARM: OMAP2+: board files: use SoC-specific system restart functions

Modify the board files to use the SoC-specific system restart
functions.  At this point it's possible to remove omap_prcm_restart()
from mach-omap2/prcm.c.

While removing the prototypes for the now-unused restart functions, clean
up a few more obsolete prototypes in mach-omap2/clock.h.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
Tested-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
parent 2f334a38
......@@ -286,5 +286,5 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
.init_machine = omap_2430sdp_init,
.init_late = omap2430_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
......@@ -597,5 +597,5 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
.init_machine = omap_3430sdp_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -212,5 +212,5 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.init_machine = omap_sdp_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -881,5 +881,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
.init_machine = omap_4430sdp_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
.restart = omap_prcm_restart,
.restart = omap44xx_restart,
MACHINE_END
......@@ -93,5 +93,5 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.init_machine = am3517_crane_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -393,5 +393,5 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.init_machine = am3517_evm_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -338,5 +338,5 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
.init_machine = omap_apollon_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
......@@ -753,18 +753,18 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.init_machine = cm_t35_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
.init_machine = cm_t3730_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.timer = &omap3_timer,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -298,5 +298,5 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -643,5 +643,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.init_machine = devkit8000_init,
.init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -57,7 +57,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
#endif
......@@ -76,7 +76,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
#endif
......@@ -95,7 +95,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.init_machine = omap_generic_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
#endif
......@@ -134,7 +134,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.init_late = omap4430_init_late,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
.restart = omap_prcm_restart,
.restart = omap44xx_restart,
MACHINE_END
#endif
......@@ -154,6 +154,6 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
.init_machine = omap_generic_init,
.timer = &omap5_timer,
.dt_compat = omap5_boards_compat,
.restart = omap_prcm_restart,
.restart = omap44xx_restart,
MACHINE_END
#endif
......@@ -386,5 +386,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
.init_machine = omap_h4_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
......@@ -651,7 +651,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
......@@ -664,5 +664,5 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -436,5 +436,5 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.init_machine = omap_ldp_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -690,7 +690,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
......@@ -703,7 +703,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
......@@ -716,5 +716,5 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
.restart = omap_prcm_restart,
.restart = omap2xxx_restart,
MACHINE_END
......@@ -541,5 +541,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.init_machine = omap3_beagle_init,
.init_late = omap3_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -757,5 +757,5 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
.init_machine = omap3_evm_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -232,7 +232,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
......@@ -245,5 +245,5 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -619,5 +619,5 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.init_machine = omap3pandora_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -427,5 +427,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
.init_machine = omap3_stalker_init,
.init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -387,5 +387,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
.init_machine = omap3_touchbook_init,
.init_late = omap3430_init_late,
.timer = &omap3_secure_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -524,5 +524,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.init_machine = omap4_panda_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
.restart = omap_prcm_restart,
.restart = omap44xx_restart,
MACHINE_END
......@@ -553,5 +553,5 @@ MACHINE_START(OVERO, "Gumstix Overo")
.init_machine = overo_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -148,7 +148,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.init_machine = rm680_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
......@@ -161,5 +161,5 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
.init_machine = rm680_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -127,5 +127,5 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.init_machine = rx51_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -46,7 +46,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
.restart = omap_prcm_restart,
.restart = omap44xx_restart,
MACHINE_END
MACHINE_START(TI8148EVM, "ti8148evm")
......@@ -58,5 +58,5 @@ MACHINE_START(TI8148EVM, "ti8148evm")
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
.restart = omap_prcm_restart,
.restart = omap44xx_restart,
MACHINE_END
......@@ -138,7 +138,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.init_machine = omap_zoom_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
......@@ -151,5 +151,5 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.init_machine = omap_zoom_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
.restart = omap3xxx_restart,
MACHINE_END
......@@ -409,33 +409,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
#ifdef CONFIG_ARCH_OMAP2
void omap2xxx_clk_prepare_for_reboot(void);
#else
static inline void omap2xxx_clk_prepare_for_reboot(void)
{
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void omap3_clk_prepare_for_reboot(void);
#else
static inline void omap3_clk_prepare_for_reboot(void)
{
}
#endif
#ifdef CONFIG_ARCH_OMAP4
void omap4_clk_prepare_for_reboot(void);
#else
static inline void omap4_clk_prepare_for_reboot(void)
{
}
#endif
int omap2_dflt_clk_enable(struct clk *clk);
void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
......@@ -454,7 +427,6 @@ extern const struct clkops clkops_dummy;
extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
extern struct clk *vclk, *sclk;
extern const struct clksel_rate gpt_32k_rates[];
extern const struct clksel_rate gpt_sys_rates[];
......
......@@ -1968,10 +1968,6 @@ int __init omap2420_clk_init(void)
*/
clk_enable_init_clocks();
/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
return 0;
}
......@@ -2067,10 +2067,6 @@ int __init omap2430_clk_init(void)
*/
clk_enable_init_clocks();
/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
return 0;
}
......@@ -28,26 +28,10 @@
#include "cm.h"
#include "cm-regbits-24xx.h"
struct clk *vclk, *sclk;
/*
* Omap24xx specific clock functions
*/
/*
* Set clocks for bypass mode for reboot to work.
*/
void omap2xxx_clk_prepare_for_reboot(void)
{
u32 rate;
if (vclk == NULL || sclk == NULL)
return;
rate = clk_get_rate(sclk);
clk_set_rate(vclk, rate);
}
/*
* Switch the MPU rate if specified on cmdline. We cannot do this
* early until cmdline is parsed. XXX This should be removed from the
......
......@@ -111,7 +111,6 @@ void am35xx_init_late(void);
void ti81xx_init_late(void);
void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
void omap_prcm_restart(char, const char *);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
void omap2xxx_restart(char mode, const char *cmd);
......
......@@ -47,58 +47,6 @@ void __iomem *prcm_mpu_base;
#define MAX_MODULE_ENABLE_WAIT 100000
/* Resets clock rates and reboots the system. Only called from system.h */
void omap_prcm_restart(char mode, const char *cmd)
{
s16 prcm_offs = 0;
if (cpu_is_omap24xx()) {
omap2xxx_clk_prepare_for_reboot();
prcm_offs = WKUP_MOD;
} else if (cpu_is_omap34xx()) {
prcm_offs = OMAP3430_GR_MOD;
omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
} else if (cpu_is_omap44xx()) {
omap4_prminst_global_warm_sw_reset(); /* never returns */
} else {
WARN_ON(1);
}
/*
* As per Errata i520, in some cases, user will not be able to
* access DDR memory after warm-reset.
* This situation occurs while the warm-reset happens during a read
* access to DDR memory. In that particular condition, DDR memory
* does not respond to a corrupted read command due to the warm
* reset occurrence but SDRC is waiting for read completion.
* SDRC is not sensitive to the warm reset, but the interconnect is
* reset on the fly, thus causing a misalignment between SDRC logic,
* interconnect logic and DDR memory state.
* WORKAROUND:
* Steps to perform before a Warm reset is trigged:
* 1. enable self-refresh on idle request
* 2. put SDRC in idle
* 3. wait until SDRC goes to idle
* 4. generate SW reset (Global SW reset)
*
* Steps to be performed after warm reset occurs (in bootloader):
* if HW warm reset is the source, apply below steps before any
* accesses to SDRAM:
* 1. Reset SMS and SDRC and wait till reset is complete
* 2. Re-initialize SMS, SDRC and memory
*
* NOTE: Above work around is required only if arch reset is implemented
* using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need
* the WA since it resets SDRC as well as part of cold reset.
*/
/* XXX should be moved to some OMAP2/3 specific code */
omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
OMAP2_RM_RSTCTRL);
omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
}
/**
* omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
* @reg: physical address of module IDLEST register
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment