Commit 18dd6199 authored by Matthias Brugger's avatar Matthias Brugger Committed by Mark Brown

spi: spi-omap2-mcspi.c: fix coding style

This patch fixes some indentation errors.
Signed-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: default avatarJarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 0202a32d
......@@ -1020,7 +1020,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
}
static int omap2_mcspi_transfer_one_message(struct spi_master *master,
struct spi_message *m)
struct spi_message *m)
{
struct omap2_mcspi *mcspi;
struct spi_transfer *t;
......@@ -1041,7 +1041,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
|| (len && !(rx_buf || tx_buf))
|| (t->bits_per_word &&
( t->bits_per_word < 4
|| t->bits_per_word > 32))) {
|| t->bits_per_word > 32))) {
dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
......@@ -1052,8 +1052,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
}
if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
t->speed_hz,
OMAP2_MCSPI_MAX_FREQ >> 15);
t->speed_hz,
OMAP2_MCSPI_MAX_FREQ >> 15);
return -EINVAL;
}
......@@ -1099,7 +1099,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
return ret;
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
omap2_mcspi_set_master_mode(master);
......@@ -1228,7 +1228,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
sprintf(dma_ch_name, "rx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
dma_ch_name);
dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
status = -ENODEV;
......@@ -1238,7 +1238,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
sprintf(dma_ch_name, "tx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
dma_ch_name);
dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
status = -ENODEV;
......@@ -1254,7 +1254,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl))
dev_warn(&pdev->dev,
"pins are not configured from the driver\n");
"pins are not configured from the driver\n");
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment