Commit 18e170d0 authored by Joerg Roedel's avatar Joerg Roedel

Merge branch 'omap-for-v3.8/cleanup-headers-iommu' of...

Merge branch 'omap-for-v3.8/cleanup-headers-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/omap
parents 9489e9dc 2ab7c848
......@@ -184,8 +184,6 @@ obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
obj-y += $(iommu-m) $(iommu-y)
......
......@@ -127,7 +127,7 @@ static struct platform_device omap2cam_device = {
#if defined(CONFIG_IOMMU_API)
#include <plat/iommu.h>
#include <linux/platform_data/iommu-omap.h>
static struct resource omap3isp_resources[] = {
{
......
......@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <plat/iommu.h>
#include <linux/platform_data/iommu-omap.h>
#include "soc.h"
#include "common.h"
......
......@@ -26,8 +26,8 @@
#include <plat/mmc.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/iommu-omap.h>
#include <plat/dmtimer.h>
#include <plat/iommu.h>
#include "am35xx.h"
......
......@@ -28,10 +28,10 @@
#include <plat/dma.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/iommu-omap.h>
#include <plat/mmc.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
#include <plat/iommu.h>
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"
......
/*
* omap iommu: omap2 architecture specific definitions
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MACH_IOMMU2_H
#define __MACH_IOMMU2_H
#include <linux/io.h>
/*
* MMU Register offsets
*/
#define MMU_REVISION 0x00
#define MMU_SYSCONFIG 0x10
#define MMU_SYSSTATUS 0x14
#define MMU_IRQSTATUS 0x18
#define MMU_IRQENABLE 0x1c
#define MMU_WALKING_ST 0x40
#define MMU_CNTL 0x44
#define MMU_FAULT_AD 0x48
#define MMU_TTB 0x4c
#define MMU_LOCK 0x50
#define MMU_LD_TLB 0x54
#define MMU_CAM 0x58
#define MMU_RAM 0x5c
#define MMU_GFLUSH 0x60
#define MMU_FLUSH_ENTRY 0x64
#define MMU_READ_CAM 0x68
#define MMU_READ_RAM 0x6c
#define MMU_EMU_FAULT_AD 0x70
#define MMU_REG_SIZE 256
/*
* MMU Register bit definitions
*/
#define MMU_LOCK_BASE_SHIFT 10
#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
#define MMU_LOCK_BASE(x) \
((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
#define MMU_LOCK_VICT_SHIFT 4
#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
#define MMU_LOCK_VICT(x) \
((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
#define MMU_CAM_VATAG_SHIFT 12
#define MMU_CAM_VATAG_MASK \
((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
#define MMU_CAM_P (1 << 3)
#define MMU_CAM_V (1 << 2)
#define MMU_CAM_PGSZ_MASK 3
#define MMU_CAM_PGSZ_1M (0 << 0)
#define MMU_CAM_PGSZ_64K (1 << 0)
#define MMU_CAM_PGSZ_4K (2 << 0)
#define MMU_CAM_PGSZ_16M (3 << 0)
#define MMU_RAM_PADDR_SHIFT 12
#define MMU_RAM_PADDR_MASK \
((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
#define MMU_RAM_ENDIAN_SHIFT 9
#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ELSZ_SHIFT 7
#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_MIXED_SHIFT 6
#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
/*
* register accessors
*/
static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
{
return __raw_readl(obj->regbase + offs);
}
static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
{
__raw_writel(val, obj->regbase + offs);
}
#endif /* __MACH_IOMMU2_H */
......@@ -7,6 +7,7 @@ obj-$(CONFIG_DMAR_TABLE) += dmar.o
obj-$(CONFIG_INTEL_IOMMU) += iova.o intel-iommu.o
obj-$(CONFIG_IRQ_REMAP) += intel_irq_remapping.o irq_remapping.o
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu2.o
obj-$(CONFIG_OMAP_IOVMM) += omap-iovmm.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
obj-$(CONFIG_TEGRA_IOMMU_GART) += tegra-gart.o
......
......@@ -18,11 +18,11 @@
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/debugfs.h>
#include <linux/omap-iommu.h>
#include <linux/platform_data/iommu-omap.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
#include <plat/iopgtable.h>
#include "omap-iopgtable.h"
#include "omap-iommu.h"
#define MAXCOLUMN 100 /* for short messages */
......
......@@ -19,14 +19,17 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/iommu.h>
#include <linux/omap-iommu.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <plat/iommu.h>
#include <linux/platform_data/iommu-omap.h>
#include <plat/iopgtable.h>
#include "omap-iopgtable.h"
#include "omap-iommu.h"
#define for_each_iotlb_cr(obj, n, __i, cr) \
for (__i = 0; \
......@@ -51,6 +54,21 @@ struct omap_iommu_domain {
spinlock_t lock;
};
#define MMU_LOCK_BASE_SHIFT 10
#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
#define MMU_LOCK_BASE(x) \
((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
#define MMU_LOCK_VICT_SHIFT 4
#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
#define MMU_LOCK_VICT(x) \
((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
struct iotlb_lock {
short base;
short vict;
};
/* accommodate the difference between omap1 and omap2/3 */
static const struct iommu_functions *arch_iommu;
......@@ -1015,6 +1033,23 @@ static void iopte_cachep_ctor(void *iopte)
clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
}
static u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
u32 flags)
{
memset(e, 0, sizeof(*e));
e->da = da;
e->pa = pa;
e->valid = 1;
/* FIXME: add OMAP1 support */
e->pgsz = flags & MMU_CAM_PGSZ_MASK;
e->endian = flags & MMU_RAM_ENDIAN_MASK;
e->elsz = flags & MMU_RAM_ELSZ_MASK;
e->mixed = flags & MMU_RAM_MIXED_MASK;
return iopgsz_to_bytes(e->pgsz);
}
static int omap_iommu_map(struct iommu_domain *domain, unsigned long da,
phys_addr_t pa, size_t bytes, int prot)
{
......
......@@ -10,8 +10,9 @@
* published by the Free Software Foundation.
*/
#ifndef __MACH_IOMMU_H
#define __MACH_IOMMU_H
#if defined(CONFIG_ARCH_OMAP1)
#error "iommu for this processor not implemented yet"
#endif
struct iotlb_entry {
u32 da;
......@@ -71,11 +72,6 @@ struct cr_regs {
};
};
struct iotlb_lock {
short base;
short vict;
};
/* architecture specific functions */
struct iommu_functions {
unsigned long version;
......@@ -103,42 +99,6 @@ struct iommu_functions {
ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
};
/**
* struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
* @da_start: device address where the va space starts.
* @da_end: device address where the va space ends.
* @nr_tlb_entries: number of entries supported by the translation
* look-aside buffer (TLB).
*/
struct omap_mmu_dev_attr {
u32 da_start;
u32 da_end;
int nr_tlb_entries;
};
struct iommu_platform_data {
const char *name;
const char *clk_name;
const int nr_tlb_entries;
u32 da_start;
u32 da_end;
};
/**
* struct iommu_arch_data - omap iommu private data
* @name: name of the iommu device
* @iommu_dev: handle of the iommu device
*
* This is an omap iommu private data object, which binds an iommu user
* to its iommu device. This object should be placed at the iommu user's
* dev_archdata so generic IOMMU API can be used without having to
* utilize omap-specific plumbing anymore.
*/
struct omap_iommu_arch_data {
const char *name;
struct omap_iommu *iommu_dev;
};
#ifdef CONFIG_IOMMU_API
/**
* dev_to_omap_iommu() - retrieves an omap iommu object from a user device
......@@ -152,18 +112,59 @@ static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
}
#endif
/* IOMMU errors */
#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2)
#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3)
#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4)
/*
* MMU Register offsets
*/
#define MMU_REVISION 0x00
#define MMU_SYSCONFIG 0x10
#define MMU_SYSSTATUS 0x14
#define MMU_IRQSTATUS 0x18
#define MMU_IRQENABLE 0x1c
#define MMU_WALKING_ST 0x40
#define MMU_CNTL 0x44
#define MMU_FAULT_AD 0x48
#define MMU_TTB 0x4c
#define MMU_LOCK 0x50
#define MMU_LD_TLB 0x54
#define MMU_CAM 0x58
#define MMU_RAM 0x5c
#define MMU_GFLUSH 0x60
#define MMU_FLUSH_ENTRY 0x64
#define MMU_READ_CAM 0x68
#define MMU_READ_RAM 0x6c
#define MMU_EMU_FAULT_AD 0x70
#define MMU_REG_SIZE 256
#if defined(CONFIG_ARCH_OMAP1)
#error "iommu for this processor not implemented yet"
#else
#include <plat/iommu2.h>
#endif
/*
* MMU Register bit definitions
*/
#define MMU_CAM_VATAG_SHIFT 12
#define MMU_CAM_VATAG_MASK \
((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
#define MMU_CAM_P (1 << 3)
#define MMU_CAM_V (1 << 2)
#define MMU_CAM_PGSZ_MASK 3
#define MMU_CAM_PGSZ_1M (0 << 0)
#define MMU_CAM_PGSZ_64K (1 << 0)
#define MMU_CAM_PGSZ_4K (2 << 0)
#define MMU_CAM_PGSZ_16M (3 << 0)
#define MMU_RAM_PADDR_SHIFT 12
#define MMU_RAM_PADDR_MASK \
((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
#define MMU_RAM_MIXED_SHIFT 6
#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
/*
* utilities for super page(16MB, 1MB, 64KB and 4KB)
......@@ -199,23 +200,29 @@ extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
extern int
omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
extern int omap_iommu_set_isr(const char *name,
int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
void *priv),
void *isr_priv);
extern void omap_iommu_save_ctx(struct device *dev);
extern void omap_iommu_restore_ctx(struct device *dev);
extern int omap_install_iommu_arch(const struct iommu_functions *ops);
extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
extern int omap_foreach_iommu_device(void *data,
int (*fn)(struct device *, void *));
extern int omap_install_iommu_arch(const struct iommu_functions *ops);
extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
extern ssize_t
omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
extern size_t
omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
#endif /* __MACH_IOMMU_H */
/*
* register accessors
*/
static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
{
return __raw_readl(obj->regbase + offs);
}
static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
{
__raw_writel(val, obj->regbase + offs);
}
......@@ -13,12 +13,15 @@
#include <linux/err.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/omap-iommu.h>
#include <linux/slab.h>
#include <linux/stringify.h>
#include <linux/platform_data/iommu-omap.h>
#include <plat/iommu.h>
#include "omap-iommu.h"
/*
* omap2 architecture specific register bit definitions
......@@ -65,6 +68,12 @@
((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
/* IOMMU errors */
#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
#define OMAP_IOMMU_ERR_EMU_MISS (1 << 2)
#define OMAP_IOMMU_ERR_TBLWALK_FAULT (1 << 3)
#define OMAP_IOMMU_ERR_MULTIHIT_FAULT (1 << 4)
static void __iommu_set_twl(struct omap_iommu *obj, bool on)
{
......
......@@ -10,9 +10,6 @@
* published by the Free Software Foundation.
*/
#ifndef __PLAT_OMAP_IOMMU_H
#define __PLAT_OMAP_IOMMU_H
/*
* "L2 table" address mask and size definitions.
*/
......@@ -97,24 +94,5 @@ static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da))
static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
u32 flags)
{
memset(e, 0, sizeof(*e));
e->da = da;
e->pa = pa;
e->valid = 1;
/* FIXME: add OMAP1 support */
e->pgsz = flags & MMU_CAM_PGSZ_MASK;
e->endian = flags & MMU_RAM_ENDIAN_MASK;
e->elsz = flags & MMU_RAM_ELSZ_MASK;
e->mixed = flags & MMU_RAM_MIXED_MASK;
return iopgsz_to_bytes(e->pgsz);
}
#define to_iommu(dev) \
(struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
#endif /* __PLAT_OMAP_IOMMU_H */
......@@ -17,14 +17,58 @@
#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/iommu.h>
#include <linux/omap-iommu.h>
#include <linux/platform_data/iommu-omap.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
#include "omap-iopgtable.h"
#include "omap-iommu.h"
#include <plat/iopgtable.h>
/*
* IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
*
* lower 16 bit is used for h/w and upper 16 bit is for s/w.
*/
#define IOVMF_SW_SHIFT 16
/*
* iovma: h/w flags derived from cam and ram attribute
*/
#define IOVMF_CAM_MASK (~((1 << 10) - 1))
#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
#define IOVMF_PGSZ_MASK (3 << 0)
#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
#define IOVMF_ENDIAN_MASK (1 << 9)
#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
#define IOVMF_ELSZ_MASK (3 << 7)
#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
#define IOVMF_MIXED_MASK (1 << 6)
#define IOVMF_MIXED MMU_RAM_MIXED
/*
* iovma: s/w flags, used for mapping and umapping internally.
*/
#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
/* "superpages" is supported just with physically linear pages */
#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
static struct kmem_cache *iovm_area_cachep;
......
......@@ -61,6 +61,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/omap-iommu.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
......
......@@ -31,11 +31,9 @@
#include <media/v4l2-device.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/iommu.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
#include <linux/iommu.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
#include "ispstat.h"
#include "ispccdc.h"
......
......@@ -30,6 +30,7 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/omap-iommu.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <media/v4l2-event.h>
......
......@@ -26,6 +26,7 @@
*/
#include <linux/dma-mapping.h>
#include <linux/omap-iommu.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
......
......@@ -27,6 +27,7 @@
#include <linux/clk.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/omap-iommu.h>
#include <linux/pagemap.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
......@@ -34,8 +35,6 @@
#include <linux/vmalloc.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-ioctl.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
#include <plat/omap-pm.h>
#include "ispvideo.h"
......
......@@ -10,10 +10,8 @@
* published by the Free Software Foundation.
*/
#ifndef __IOMMU_MMAP_H
#define __IOMMU_MMAP_H
#include <linux/iommu.h>
#ifndef _INTEL_IOMMU_H_
#define _INTEL_IOMMU_H_
struct iovm_struct {
struct omap_iommu *iommu; /* iommu object which this belongs to */
......@@ -25,52 +23,14 @@ struct iovm_struct {
void *va; /* mpu side mapped address */
};
/*
* IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
*
* lower 16 bit is used for h/w and upper 16 bit is for s/w.
*/
#define IOVMF_SW_SHIFT 16
/*
* iovma: h/w flags derived from cam and ram attribute
*/
#define IOVMF_CAM_MASK (~((1 << 10) - 1))
#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
#define IOVMF_PGSZ_MASK (3 << 0)
#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
#define IOVMF_ENDIAN_MASK (1 << 9)
#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
#define MMU_RAM_ENDIAN_SHIFT 9
#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
#define IOVMF_ELSZ_MASK (3 << 7)
#define MMU_RAM_ELSZ_SHIFT 7
#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
#define IOVMF_MIXED_MASK (1 << 6)
#define IOVMF_MIXED MMU_RAM_MIXED
/*
* iovma: s/w flags, used for mapping and umapping internally.
*/
#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
/* "superpages" is supported just with physically linear pages */
#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
struct iommu_domain;
extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
extern u32
......@@ -86,4 +46,7 @@ omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
const u32 da);
extern void *omap_da_to_va(struct device *dev, u32 da);
#endif /* __IOMMU_MMAP_H */
extern void omap_iommu_save_ctx(struct device *dev);
extern void omap_iommu_restore_ctx(struct device *dev);
#endif
/*
* omap iommu: main structures
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define MMU_REG_SIZE 256
/**
* struct iommu_arch_data - omap iommu private data
* @name: name of the iommu device
* @iommu_dev: handle of the iommu device
*
* This is an omap iommu private data object, which binds an iommu user
* to its iommu device. This object should be placed at the iommu user's
* dev_archdata so generic IOMMU API can be used without having to
* utilize omap-specific plumbing anymore.
*/
struct omap_iommu_arch_data {
const char *name;
struct omap_iommu *iommu_dev;
};
/**
* struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod
* @da_start: device address where the va space starts.
* @da_end: device address where the va space ends.
* @nr_tlb_entries: number of entries supported by the translation
* look-aside buffer (TLB).
*/
struct omap_mmu_dev_attr {
u32 da_start;
u32 da_end;
int nr_tlb_entries;
};
struct iommu_platform_data {
const char *name;
const char *clk_name;
const int nr_tlb_entries;
u32 da_start;
u32 da_end;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment