Commit 19792610 authored by Alexander Shiyan's avatar Alexander Shiyan Committed by Olof Johansson

ARM: clps711x: Add FIQ interrupt handling

CLPS711X-target CPU can have a several FIQ interrupts. With this patch
we adds handling for a one which will be used for ALSA PCM later.
Since FIQ have a separate handler we only add "mask" and "unmask" calls
which will used for enable/disable_irq functions.
Signed-off-by: default avatarAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 99f04c8f
......@@ -30,6 +30,7 @@
#include <linux/clk-provider.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
......@@ -91,7 +92,7 @@ static void int1_unmask(struct irq_data *d)
}
static struct irq_chip int1_chip = {
.name = "Interrupt Vector 1 ",
.name = "Interrupt Vector 1",
.irq_ack = int1_ack,
.irq_eoi = int1_eoi,
.irq_mask = int1_mask,
......@@ -128,13 +129,37 @@ static void int2_unmask(struct irq_data *d)
}
static struct irq_chip int2_chip = {
.name = "Interrupt Vector 2 ",
.name = "Interrupt Vector 2",
.irq_ack = int2_ack,
.irq_eoi = int2_eoi,
.irq_mask = int2_mask,
.irq_unmask = int2_unmask,
};
static void int3_mask(struct irq_data *d)
{
u32 intmr3;
intmr3 = clps_readl(INTMR3);
intmr3 &= ~(1 << (d->irq - 32));
clps_writel(intmr3, INTMR3);
}
static void int3_unmask(struct irq_data *d)
{
u32 intmr3;
intmr3 = clps_readl(INTMR3);
intmr3 |= 1 << (d->irq - 32);
clps_writel(intmr3, INTMR3);
}
static struct irq_chip int3_chip = {
.name = "Interrupt Vector 3",
.irq_mask = int3_mask,
.irq_unmask = int3_unmask,
};
static struct {
int nr;
struct irq_chip *chip;
......@@ -188,6 +213,14 @@ void __init clps711x_init_irq(void)
set_irq_flags(clps711x_irqdescs[i].nr,
IRQF_VALID | IRQF_PROBE);
}
if (IS_ENABLED(CONFIG_FIQ)) {
init_FIQ(0);
irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip,
handle_bad_irq);
set_irq_flags(IRQ_DAIINT,
IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
}
}
inline u32 fls16(u32 x)
......
......@@ -4,7 +4,7 @@
* Common bits.
*/
#define CLPS711X_NR_IRQS (30)
#define CLPS711X_NR_IRQS (33)
#define CLPS711X_NR_GPIO (4 * 8 + 3)
#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit))
......
......@@ -298,4 +298,7 @@
#define IRQ_UTXINT2 (16 + 12)
#define IRQ_URXINT2 (16 + 13)
/* INTSR3 Interrupts */
#define IRQ_DAIINT (32 + 0)
#endif /* __MACH_CLPS711X_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment