Merge tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu into arm/dt

mvebu dt64 for 5.7 (part 1)

Improve network support on two Armada 8040 based board:
Clearfog GT 8 and Macchiatobin.

Add ethernet alias on Espressobin for U-Boot support.

Fix various dt compilation issue or warning.

* tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: Fix cpu compatible for AP807-quad
  arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi
  arm64: dts: marvell: build ESPRESSObin variants
  arm64: dts: marvell: espressobin: indicate dts version
  arm64: dts: marvell: espressobin: add ethernet alias
  arm64: dts: mcbin: support 2W SFP modules
  arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay

Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/marvell/Makefile

@@ -2,6 +2,9 @@
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb

arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts

@@ -11,6 +11,8 @@
  * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {

arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts

@@ -11,6 +11,8 @@
  * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {

arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts

@@ -11,6 +11,8 @@
  * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
  */
 
+/dts-v1/;
+
 #include "armada-3720-espressobin.dtsi"
 
 / {

arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi

@@ -7,12 +7,16 @@
  *
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-372x.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -367,6 +367,7 @@ ge_phy: ethernet-phy@0 {
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
 		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
 	};
 
 	switch0: switch0@4 {

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

@@ -71,6 +71,7 @@ sfp_eth0: sfp-eth0 {
 		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp0_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -83,6 +84,7 @@ sfp_eth1: sfp-eth1 {
 		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 
 	sfp_eth3: sfp-eth3 {
@@ -95,6 +97,7 @@ sfp_eth3: sfp-eth3 {
 		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+		maximum-power-milliwatt = <2000>;
 	};
 };
 

arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi

@@ -53,4 +53,9 @@ l2: l2-cache {
 			cache-sets = <512>;
 		};
 	};
+
+	thermal-zones {
+		/delete-node/ ap-thermal-cpu2;
+		/delete-node/ ap-thermal-cpu3;
+	};
 };

arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi

@@ -17,7 +17,7 @@ cpus {
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -32,7 +32,7 @@ cpu0: cpu@0 {
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -47,7 +47,7 @@ cpu1: cpu@1 {
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
@@ -62,7 +62,7 @@ cpu2: cpu@100 {
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 			#cooling-cells = <2>;