ARM: socfpga: dts: enable USB and I2C on Arria10 SoCDK

On the Arria10 Devkit, the I2C bus has a serial EEPROM and an RTC
hanging off it. Also, enable the USB node.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

arch/arm/boot/dts/socfpga_arria10_socdk.dtsi

@@ -70,6 +70,33 @@ &gmac0 {
 	status = "okay";
 };
 
+&i2c1 {
+	speed-mode = <0>;
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
 &uart1 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+};