Skip to content

L
linux
Commit 1a8d5fab authored by Haojian Zhuang's avatar Haojian Zhuang
Browse files
Options

ARM: pxa: rename NR_BUILTIN_GPIO 

NR_BUILTIN_GPIO is both defined in arch-pxa and arch-mmp. Now replace it
with PXA_NR_BUILTIN_GPIO and MMP_NR_BUILTIN_GPIO.
Signed-off-by: default avatarHaojian Zhuang <haojian.zhuang@marvell.com>
parent 478e223c
Hide whitespace changes
Inline Side-by-side
Showing with 23 additions and 58 deletions
arch/arm/mach-mmp/include/mach/gpio-pxa.h
View file @ 1a8d5fab
......@@ -10,8 +10,6 @@
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
/* NOTE: these macros are defined here to make optimization of
......
arch/arm/mach-mmp/include/mach/gpio.h
View file @ 1a8d5fab
......@@ -6,5 +6,4 @@
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
arch/arm/mach-mmp/include/mach/irqs.h
View file @ 1a8d5fab
......@@ -219,11 +219,10 @@
#define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2)
#define IRQ_GPIO_START 128
#define IRQ_GPIO_NUM 192
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
#define MMP_NR_BUILTIN_GPIO 192
#define MMP_GPIO_TO_IRQ(gpio) (IRQ_GPIO_START + (gpio))
#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM)
#define IRQ_BOARD_START (IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
#define NR_IRQS (IRQ_BOARD_START)
......
arch/arm/mach-mmp/tavorevb.c
View file @ 1a8d5fab
......@@ -19,6 +19,7 @@
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
#include <mach/irqs.h>
#include "common.h"
......
arch/arm/mach-mmp/ttc_dkb.c
View file @ 1a8d5fab
......@@ -24,12 +24,13 @@
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
#include <mach/irqs.h>
#include "common.h"
#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
((x < 16) ? x : 15)))
#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
((x < 16) ? x : 15)))
/*
......@@ -136,7 +137,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = {
{
.type = "max7312",
.addr = 0x23,
.irq = IRQ_GPIO(80),
.irq = MMP_GPIO_TO_IRQ(80),
.platform_data = &max7312_data,
},
};
......
arch/arm/mach-pxa/include/mach/corgi.h
View file @ 1a8d5fab
......@@ -98,7 +98,7 @@
CORGI_SCP_MIC_BIAS )
#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0)
#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */
#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */
......
arch/arm/mach-pxa/include/mach/gpio-pxa.h
View file @ 1a8d5fab
......@@ -93,8 +93,6 @@
#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
#define gpio_to_bank(gpio) ((gpio) >> 5)
#ifdef CONFIG_CPU_PXA26x
......
arch/arm/mach-pxa/include/mach/gpio.h
View file @ 1a8d5fab
......@@ -28,5 +28,4 @@
/* The defines for the driver are needed for the accelerated accessors */
#include "gpio-pxa.h"
#include <plat/gpio.h>
#endif
arch/arm/mach-pxa/include/mach/hx4700.h
View file @ 1a8d5fab
......@@ -15,7 +15,7 @@
#include <linux/gpio.h>
#include <linux/mfd/asic3.h>
#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
#define HX4700_NR_IRQS (IRQ_BOARD_START + 70)
......
arch/arm/mach-pxa/include/mach/irqs.h
View file @ 1a8d5fab
......@@ -88,7 +88,7 @@
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
#define PXA_GPIO_IRQ_NUM (192)
#define PXA_NR_BUILTIN_GPIO (192)
#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
/*
......@@ -98,7 +98,7 @@
* By default, no board IRQ is reserved. It should be finished in
* custom board since sparse IRQ is already enabled.
*/
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
#define NR_IRQS (IRQ_BOARD_START)
......
arch/arm/mach-pxa/include/mach/littleton.h
View file @ 1a8d5fab
......@@ -7,7 +7,7 @@
#define LITTLETON_GPIO_LCD_CS (17)
#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO)
#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x))
#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8)
......
arch/arm/mach-pxa/include/mach/magician.h
View file @ 1a8d5fab
......@@ -78,7 +78,7 @@
* CPLD EGPIOs
*/
#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
......
arch/arm/mach-pxa/include/mach/poodle.h
View file @ 1a8d5fab
......@@ -71,7 +71,7 @@
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
......
arch/arm/mach-pxa/include/mach/spitz.h
View file @ 1a8d5fab
......@@ -108,7 +108,7 @@
#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_SUS_SET 0
#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO)
#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
......@@ -140,7 +140,7 @@
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12)
#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1)
#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
......@@ -152,7 +152,7 @@
#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
/* Akita IO Expander GPIOs */
#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12)
#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
......
arch/arm/mach-pxa/include/mach/tosa.h
View file @ 1a8d5fab
......@@ -24,7 +24,7 @@
/*
* SCOOP2 internal GPIOs
*/
#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO
#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1)
#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
......@@ -42,7 +42,7 @@
/*
* SCOOP2 jacket GPIOs
*/
#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12)
#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
......@@ -59,7 +59,7 @@
/*
* TC6393XB GPIOs
*/
#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12)
#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12)
#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0)
#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1)
......
arch/arm/mach-pxa/pcm990-baseboard.c
View file @ 1a8d5fab
......@@ -378,7 +378,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
#include <linux/i2c/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
.gpio_base = NR_BUILTIN_GPIO,
.gpio_base = PXA_NR_BUILTIN_GPIO,
};
static int gpio_bus_switch = -EINVAL;
......@@ -406,9 +406,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
int ret;
if (gpio_bus_switch < 0) {
ret = gpio_request(NR_BUILTIN_GPIO, "camera");
ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
if (!ret) {
gpio_bus_switch = NR_BUILTIN_GPIO;
gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
}
}
......
arch/arm/plat-pxa/include/plat/gpio.h deleted 100644 → 0
View file @ 478e223c
#ifndef __PLAT_GPIO_H
#define __PLAT_GPIO_H
#define __ARM_GPIOLIB_COMPLEX
/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
#include <mach/gpio-pxa.h>
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
return GPLR(gpio) & GPIO_bit(gpio);
else
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned gpio, int value)
{
if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
if (value)
GPSR(gpio) = GPIO_bit(gpio);
else
GPCR(gpio) = GPIO_bit(gpio);
} else
__gpio_set_value(gpio, value);
}
#define gpio_cansleep __gpio_cansleep
#endif /* __PLAT_GPIO_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7