Commit 1acd2de5 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
 "The second round of updates for the input subsystem.

  Updates to ALPS an bfin_roraty drivers and a couple oother fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - use IS_ENABLED instead of homegrown code
  Input: bfin_rotary - introduce open and close methods
  Input: bfin_rotary - convert to use managed resources
  Input: bfin_rotary - use generic IO functions
  Input: bfin_rotary - move pin lists into into platform data
  Input: bfin_rotary - move platform header to linux/platform_data
  Input: bfin_rotary - mark suspend and resume code as __maybe_unused
  Input: bfin_rotary - fix potential oops in interrupt handler
  Input: ALPS - move v7 packet info to Documentation and v6 packet info
  Input: ALPS - fix confusing comment in protocol data
  Input: ALPS - do not mix trackstick and external PS/2 mouse data
  Input: ALPS - fix trackstick detection on some Dell Latitudes
  Input: ALPS - consolidate setting protocol parameters
  Input: ALPS - split protocol data from model info
  Input: ALPS - make Rushmore a separate protocol
  Input: ALPS - renumber protocol numbers
  Input: adi - remove an unnecessary check
  Input: pxa27x_keypad - remove an unneeded NULL check
  Input: soc_button_array - use "Windows" key for "Home"
parents b5ccb078 4c971aa7
......@@ -3,8 +3,8 @@ ALPS Touchpad Protocol
Introduction
------------
Currently the ALPS touchpad driver supports five protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4 and 5.
Currently the ALPS touchpad driver supports seven protocol versions in use by
ALPS touchpads, called versions 1, 2, 3, 4, 5, 6 and 7.
Since roughly mid-2010 several new ALPS touchpads have been released and
integrated into a variety of laptops and netbooks. These new touchpads
......@@ -240,3 +240,67 @@ For mt, the format is:
byte 3: 0 x23 x22 x21 x20 x19 x18 x17
byte 4: 0 x9 x8 x7 x6 x5 x4 x3
byte 5: 0 x16 x15 x14 x13 x12 x11 x10
ALPS Absolute Mode - Protocol Version 6
---------------------------------------
For trackstick packet, the format is:
byte 0: 1 1 1 1 1 1 1 1
byte 1: 0 X6 X5 X4 X3 X2 X1 X0
byte 2: 0 Y6 Y5 Y4 Y3 Y2 Y1 Y0
byte 3: ? Y7 X7 ? ? M R L
byte 4: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
byte 5: 0 1 1 1 1 1 1 1
For touchpad packet, the format is:
byte 0: 1 1 1 1 1 1 1 1
byte 1: 0 0 0 0 x3 x2 x1 x0
byte 2: 0 0 0 0 y3 y2 y1 y0
byte 3: ? x7 x6 x5 x4 ? r l
byte 4: ? y7 y6 y5 y4 ? ? ?
byte 5: z7 z6 z5 z4 z3 z2 z1 z0
(v6 touchpad does not have middle button)
ALPS Absolute Mode - Protocol Version 7
---------------------------------------
For trackstick packet, the format is:
byte 0: 0 1 0 0 1 0 0 0
byte 1: 1 1 * * 1 M R L
byte 2: X7 1 X5 X4 X3 X2 X1 X0
byte 3: Z6 1 Y6 X6 1 Y2 Y1 Y0
byte 4: Y7 0 Y5 Y4 Y3 1 1 0
byte 5: T&P 0 Z5 Z4 Z3 Z2 Z1 Z0
For touchpad packet, the format is:
packet-fmt b7 b6 b5 b4 b3 b2 b1 b0
byte 0: TWO & MULTI L 1 R M 1 Y0-2 Y0-1 Y0-0
byte 0: NEW L 1 X1-5 1 1 Y0-2 Y0-1 Y0-0
byte 1: Y0-10 Y0-9 Y0-8 Y0-7 Y0-6 Y0-5 Y0-4 Y0-3
byte 2: X0-11 1 X0-10 X0-9 X0-8 X0-7 X0-6 X0-5
byte 3: X1-11 1 X0-4 X0-3 1 X0-2 X0-1 X0-0
byte 4: TWO X1-10 TWO X1-9 X1-8 X1-7 X1-6 X1-5 X1-4
byte 4: MULTI X1-10 TWO X1-9 X1-8 X1-7 X1-6 Y1-5 1
byte 4: NEW X1-10 TWO X1-9 X1-8 X1-7 X1-6 0 0
byte 5: TWO & NEW Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 Y1-5 Y1-4
byte 5: MULTI Y1-10 0 Y1-9 Y1-8 Y1-7 Y1-6 F-1 F-0
L: Left button
R / M: Non-clickpads: Right / Middle button
Clickpads: When > 2 fingers are down, and some fingers
are in the button area, then the 2 coordinates reported
are for fingers outside the button area and these report
extra fingers being present in the right / left button
area. Note these fingers are not added to the F field!
so if a TWO packet is received and R = 1 then there are
3 fingers down, etc.
TWO: 1: Two touches present, byte 0/4/5 are in TWO fmt
0: If byte 4 bit 0 is 1, then byte 0/4/5 are in MULTI fmt
otherwise byte 0 bit 4 must be set and byte 0/4/5 are
in NEW fmt
F: Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
......@@ -666,7 +666,14 @@ static struct platform_device bfin_sport1_uart_device = {
#endif
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
#include <linux/platform_data/bfin_rotary.h>
static const u16 per_cnt[] = {
P_CNT_CUD,
P_CNT_CDG,
P_CNT_CZM,
0
};
static struct bfin_rotary_platform_data bfin_rotary_data = {
/*.rotary_up_key = KEY_UP,*/
......@@ -676,9 +683,15 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
.debounce = 10, /* 0..17 */
.mode = ROT_QUAD_ENC | ROT_DEBE,
.pm_wakeup = 1,
.pin_list = per_cnt,
};
static struct resource bfin_rotary_resources[] = {
{
.start = CNT_CONFIG,
.end = CNT_CONFIG + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CNT,
.end = IRQ_CNT,
......
......@@ -1092,7 +1092,14 @@ static struct platform_device bfin_device_gpiokeys = {
#endif
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
#include <linux/platform_data/bfin_rotary.h>
static const u16 per_cnt[] = {
P_CNT_CUD,
P_CNT_CDG,
P_CNT_CZM,
0
};
static struct bfin_rotary_platform_data bfin_rotary_data = {
/*.rotary_up_key = KEY_UP,*/
......@@ -1102,9 +1109,15 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
.debounce = 10, /* 0..17 */
.mode = ROT_QUAD_ENC | ROT_DEBE,
.pm_wakeup = 1,
.pin_list = per_cnt,
};
static struct resource bfin_rotary_resources[] = {
{
.start = CNT_CONFIG,
.end = CNT_CONFIG + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CNT,
.end = IRQ_CNT,
......
......@@ -159,7 +159,7 @@ static struct platform_device bf54x_kpad_device = {
#endif
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
#include <linux/platform_data/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
/*.rotary_up_key = KEY_UP,*/
......@@ -172,6 +172,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
};
static struct resource bfin_rotary_resources[] = {
{
.start = CNT_CONFIG,
.end = CNT_CONFIG + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CNT,
.end = IRQ_CNT,
......
......@@ -75,7 +75,7 @@ static struct platform_device bfin_isp1760_device = {
#endif
#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
#include <linux/platform_data/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
/*.rotary_up_key = KEY_UP,*/
......@@ -87,6 +87,11 @@ static struct bfin_rotary_platform_data bfin_rotary_data = {
};
static struct resource bfin_rotary_resources[] = {
{
.start = CNT_CONFIG,
.end = CNT_CONFIG + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CNT,
.end = IRQ_CNT,
......
......@@ -535,8 +535,7 @@ static int adi_connect(struct gameport *gameport, struct gameport_driver *drv)
}
}
fail2: for (i = 0; i < 2; i++)
if (port->adi[i].dev)
input_free_device(port->adi[i].dev);
input_free_device(port->adi[i].dev);
gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
kfree(port);
......
......@@ -345,13 +345,11 @@ static int pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad)
{
const struct pxa27x_keypad_platform_data *pdata = keypad->pdata;
struct input_dev *input_dev = keypad->input_dev;
const struct matrix_keymap_data *keymap_data =
pdata ? pdata->matrix_keymap_data : NULL;
unsigned short keycode;
int i;
int error;
error = matrix_keypad_build_keymap(keymap_data, NULL,
error = matrix_keypad_build_keymap(pdata->matrix_keymap_data, NULL,
pdata->matrix_key_rows,
pdata->matrix_key_cols,
keypad->keycodes, input_dev);
......
......@@ -7,29 +7,37 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/platform_data/bfin_rotary.h>
#include <asm/portmux.h>
#include <asm/bfin_rotary.h>
static const u16 per_cnt[] = {
P_CNT_CUD,
P_CNT_CDG,
P_CNT_CZM,
0
};
#define CNT_CONFIG_OFF 0 /* CNT Config Offset */
#define CNT_IMASK_OFF 4 /* CNT Interrupt Mask Offset */
#define CNT_STATUS_OFF 8 /* CNT Status Offset */
#define CNT_COMMAND_OFF 12 /* CNT Command Offset */
#define CNT_DEBOUNCE_OFF 16 /* CNT Debounce Offset */
#define CNT_COUNTER_OFF 20 /* CNT Counter Offset */
#define CNT_MAX_OFF 24 /* CNT Maximum Count Offset */
#define CNT_MIN_OFF 28 /* CNT Minimum Count Offset */
struct bfin_rot {
struct input_dev *input;
void __iomem *base;
int irq;
unsigned int up_key;
unsigned int down_key;
unsigned int button_key;
unsigned int rel_code;
unsigned short mode;
unsigned short debounce;
unsigned short cnt_config;
unsigned short cnt_imask;
unsigned short cnt_debounce;
......@@ -59,18 +67,17 @@ static void report_rotary_event(struct bfin_rot *rotary, int delta)
static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct bfin_rot *rotary = platform_get_drvdata(pdev);
struct bfin_rot *rotary = dev_id;
int delta;
switch (bfin_read_CNT_STATUS()) {
switch (readw(rotary->base + CNT_STATUS_OFF)) {
case ICII:
break;
case UCII:
case DCII:
delta = bfin_read_CNT_COUNTER();
delta = readl(rotary->base + CNT_COUNTER_OFF);
if (delta)
report_rotary_event(rotary, delta);
break;
......@@ -83,16 +90,52 @@ static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
break;
}
bfin_write_CNT_COMMAND(W1LCNT_ZERO); /* Clear COUNTER */
bfin_write_CNT_STATUS(-1); /* Clear STATUS */
writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */
writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */
return IRQ_HANDLED;
}
static int bfin_rotary_open(struct input_dev *input)
{
struct bfin_rot *rotary = input_get_drvdata(input);
unsigned short val;
if (rotary->mode & ROT_DEBE)
writew(rotary->debounce & DPRESCALE,
rotary->base + CNT_DEBOUNCE_OFF);
writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF);
val = UCIE | DCIE;
if (rotary->button_key)
val |= CZMIE;
writew(val, rotary->base + CNT_IMASK_OFF);
writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF);
return 0;
}
static void bfin_rotary_close(struct input_dev *input)
{
struct bfin_rot *rotary = input_get_drvdata(input);
writew(0, rotary->base + CNT_CONFIG_OFF);
writew(0, rotary->base + CNT_IMASK_OFF);
}
static void bfin_rotary_free_action(void *data)
{
peripheral_free_list(data);
}
static int bfin_rotary_probe(struct platform_device *pdev)
{
struct bfin_rotary_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev);
struct bfin_rot *rotary;
struct resource *res;
struct input_dev *input;
int error;
......@@ -102,18 +145,37 @@ static int bfin_rotary_probe(struct platform_device *pdev)
return -EINVAL;
}
error = peripheral_request_list(per_cnt, dev_name(&pdev->dev));
if (error) {
dev_err(&pdev->dev, "requesting peripherals failed\n");
return error;
if (pdata->pin_list) {
error = peripheral_request_list(pdata->pin_list,
dev_name(&pdev->dev));
if (error) {
dev_err(dev, "requesting peripherals failed: %d\n",
error);
return error;
}
error = devm_add_action(dev, bfin_rotary_free_action,
pdata->pin_list);
if (error) {
dev_err(dev, "setting cleanup action failed: %d\n",
error);
peripheral_free_list(pdata->pin_list);
return error;
}
}
rotary = kzalloc(sizeof(struct bfin_rot), GFP_KERNEL);
input = input_allocate_device();
if (!rotary || !input) {
error = -ENOMEM;
goto out1;
}
rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
if (!rotary)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rotary->base = devm_ioremap_resource(dev, res);
if (IS_ERR(rotary->base))
return PTR_ERR(rotary->base);
input = devm_input_allocate_device(dev);
if (!input)
return -ENOMEM;
rotary->input = input;
......@@ -122,9 +184,8 @@ static int bfin_rotary_probe(struct platform_device *pdev)
rotary->button_key = pdata->rotary_button_key;
rotary->rel_code = pdata->rotary_rel_code;
error = rotary->irq = platform_get_irq(pdev, 0);
if (error < 0)
goto out1;
rotary->mode = pdata->mode;
rotary->debounce = pdata->debounce;
input->name = pdev->name;
input->phys = "bfin-rotary/input0";
......@@ -137,6 +198,9 @@ static int bfin_rotary_probe(struct platform_device *pdev)
input->id.product = 0x0001;
input->id.version = 0x0100;
input->open = bfin_rotary_open;
input->close = bfin_rotary_close;
if (rotary->up_key) {
__set_bit(EV_KEY, input->evbit);
__set_bit(rotary->up_key, input->keybit);
......@@ -151,75 +215,43 @@ static int bfin_rotary_probe(struct platform_device *pdev)
__set_bit(rotary->button_key, input->keybit);
}
error = request_irq(rotary->irq, bfin_rotary_isr,
0, dev_name(&pdev->dev), pdev);
/* Quiesce the device before requesting irq */
bfin_rotary_close(input);
rotary->irq = platform_get_irq(pdev, 0);
if (rotary->irq < 0) {
dev_err(dev, "No rotary IRQ specified\n");
return -ENOENT;
}
error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
0, dev_name(dev), rotary);
if (error) {
dev_err(&pdev->dev,
"unable to claim irq %d; error %d\n",
dev_err(dev, "unable to claim irq %d; error %d\n",
rotary->irq, error);
goto out1;
return error;
}
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev,
"unable to register input device (%d)\n", error);
goto out2;
dev_err(dev, "unable to register input device (%d)\n", error);
return error;
}
if (pdata->rotary_button_key)
bfin_write_CNT_IMASK(CZMIE);
if (pdata->mode & ROT_DEBE)
bfin_write_CNT_DEBOUNCE(pdata->debounce & DPRESCALE);
if (pdata->mode)
bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() |
(pdata->mode & ~CNTE));
bfin_write_CNT_IMASK(bfin_read_CNT_IMASK() | UCIE | DCIE);
bfin_write_CNT_CONFIG(bfin_read_CNT_CONFIG() | CNTE);
platform_set_drvdata(pdev, rotary);
device_init_wakeup(&pdev->dev, 1);
return 0;
out2:
free_irq(rotary->irq, pdev);
out1:
input_free_device(input);
kfree(rotary);
peripheral_free_list(per_cnt);
return error;
}
static int bfin_rotary_remove(struct platform_device *pdev)
{
struct bfin_rot *rotary = platform_get_drvdata(pdev);
bfin_write_CNT_CONFIG(0);
bfin_write_CNT_IMASK(0);
free_irq(rotary->irq, pdev);
input_unregister_device(rotary->input);
peripheral_free_list(per_cnt);
kfree(rotary);
return 0;
}
#ifdef CONFIG_PM
static int bfin_rotary_suspend(struct device *dev)
static int __maybe_unused bfin_rotary_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct bfin_rot *rotary = platform_get_drvdata(pdev);
rotary->cnt_config = bfin_read_CNT_CONFIG();
rotary->cnt_imask = bfin_read_CNT_IMASK();
rotary->cnt_debounce = bfin_read_CNT_DEBOUNCE();
rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF);
rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF);
rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF);
if (device_may_wakeup(&pdev->dev))
enable_irq_wake(rotary->irq);
......@@ -227,38 +259,32 @@ static int bfin_rotary_suspend(struct device *dev)
return 0;
}
static int bfin_rotary_resume(struct device *dev)
static int __maybe_unused bfin_rotary_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct bfin_rot *rotary = platform_get_drvdata(pdev);
bfin_write_CNT_DEBOUNCE(rotary->cnt_debounce);
bfin_write_CNT_IMASK(rotary->cnt_imask);
bfin_write_CNT_CONFIG(rotary->cnt_config & ~CNTE);
writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF);
writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF);
writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF);
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(rotary->irq);
if (rotary->cnt_config & CNTE)
bfin_write_CNT_CONFIG(rotary->cnt_config);
writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF);
return 0;
}
static const struct dev_pm_ops bfin_rotary_pm_ops = {
.suspend = bfin_rotary_suspend,
.resume = bfin_rotary_resume,
};
#endif
static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops,
bfin_rotary_suspend, bfin_rotary_resume);
static struct platform_driver bfin_rotary_device_driver = {
.probe = bfin_rotary_probe,
.remove = bfin_rotary_remove,
.driver = {
.name = "bfin-rotary",
#ifdef CONFIG_PM
.pm = &bfin_rotary_pm_ops,
#endif
},
};
module_platform_driver(bfin_rotary_device_driver);
......
......@@ -195,7 +195,7 @@ static int soc_button_probe(struct platform_device *pdev)
static struct soc_button_info soc_button_PNP0C40[] = {
{ "power", 0, EV_KEY, KEY_POWER, false, true },
{ "home", 1, EV_KEY, KEY_HOME, false, true },
{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true },
{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false },
{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false },
{ "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false },
......
This diff is collapsed.
......@@ -14,13 +14,14 @@
#include <linux/input/mt.h>
#define ALPS_PROTO_V1 1
#define ALPS_PROTO_V2 2
#define ALPS_PROTO_V3 3
#define ALPS_PROTO_V4 4
#define ALPS_PROTO_V5 5
#define ALPS_PROTO_V6 6
#define ALPS_PROTO_V7 7 /* t3btl t4s */
#define ALPS_PROTO_V1 0x100
#define ALPS_PROTO_V2 0x200
#define ALPS_PROTO_V3 0x300
#define ALPS_PROTO_V3_RUSHMORE 0x310
#define ALPS_PROTO_V4 0x400
#define ALPS_PROTO_V5 0x500
#define ALPS_PROTO_V6 0x600
#define ALPS_PROTO_V7 0x700 /* t3btl t4s */
#define MAX_TOUCHES 2
......@@ -45,6 +46,21 @@ enum V7_PACKET_ID {
V7_PACKET_ID_UNKNOWN,
};
/**
* struct alps_protocol_info - information about protocol used by a device
* @version: Indicates V1/V2/V3/...
* @byte0: Helps figure out whether a position report packet matches the
* known format for this model. The first byte of the report, ANDed with
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
*/
struct alps_protocol_info {
u16 version;
u8 byte0, mask0;
unsigned int flags;
};
/**
* struct alps_model_info - touchpad ID table
* @signature: E7 response string to match.
......@@ -52,23 +68,16 @@ enum V7_PACKET_ID {
* (aka command mode response) identifies the firmware minor version. This
* can be used to distinguish different hardware models which are not
* uniquely identifiable through their E7 responses.
* @proto_version: Indicates V1/V2/V3/...
* @byte0: Helps figure out whether a position report packet matches the
* known format for this model. The first byte of the report, ANDed with
* mask0, should match byte0.
* @mask0: The mask used to check the first byte of the report.
* @flags: Additional device capabilities (passthrough port, trackstick, etc.).
* @protocol_info: information about protcol used by the device.
*
* Many (but not all) ALPS touchpads can be identified by looking at the
* values returned in the "E7 report" and/or the "EC report." This table
* lists a number of such touchpads.
*/
struct alps_model_info {
unsigned char signature[3];
unsigned char command_mode_resp;
unsigned char proto_version;
unsigned char byte0, mask0;
int flags;
u8 signature[3];
u8 command_mode_resp;
struct alps_protocol_info protocol_info;
};
/**
......@@ -132,8 +141,12 @@ struct alps_fields {
/**
* struct alps_data - private data structure for the ALPS driver
* @dev2: "Relative" device used to report trackstick or mouse activity.
* @phys: Physical path for the relative device.
* @psmouse: Pointer to parent psmouse device
* @dev2: Trackstick device (can be NULL).
* @dev3: Generic PS/2 mouse (can be NULL, delayed registering).
* @phys2: Physical path for the trackstick device.
* @phys3: Physical path for the generic PS/2 mouse.
* @dev3_register_work: Delayed work for registering PS/2 mouse.
* @nibble_commands: Command mapping used for touchpad register accesses.
* @addr_command: Command used to tell the touchpad that a register address
* follows.
......@@ -160,15 +173,19 @@ struct alps_fields {
* @timer: Timer for flushing out the final report packet in the stream.
*/
struct alps_data {
struct psmouse *psmouse;
struct input_dev *dev2;
char phys[32];
struct input_dev *dev3;
char phys2[32];
char phys3[32];
struct delayed_work dev3_register_work;
/* these are autodetected when the device is identified */
const struct alps_nibble_commands *nibble_commands;
int addr_command;
unsigned char proto_version;
unsigned char byte0, mask0;
unsigned char fw_ver[3];
u16 proto_version;
u8 byte0, mask0;
u8 fw_ver[3];
int flags;
int x_max;
int y_max;
......
......@@ -710,8 +710,3 @@ int cypress_init(struct psmouse *psmouse)
return -1;
}
bool cypress_supported(void)
{
return true;
}
......@@ -172,7 +172,6 @@ struct cytp_data {
#ifdef CONFIG_MOUSE_PS2_CYPRESS
int cypress_detect(struct psmouse *psmouse, bool set_properties);
int cypress_init(struct psmouse *psmouse);
bool cypress_supported(void);
#else
inline int cypress_detect(struct psmouse *psmouse, bool set_properties)
{
......@@ -182,10 +181,6 @@ inline int cypress_init(struct psmouse *psmouse)
{
return -ENOSYS;
}
inline bool cypress_supported(void)
{
return 0;
}
#endif /* CONFIG_MOUSE_PS2_CYPRESS */
#endif /* _CYPRESS_PS2_H */
......@@ -424,11 +424,6 @@ int focaltech_init(struct psmouse *psmouse)
return error;
}
bool focaltech_supported(void)
{
return true;
}
#else /* CONFIG_MOUSE_PS2_FOCALTECH */
int focaltech_init(struct psmouse *psmouse)
......@@ -438,9 +433,4 @@ int focaltech_init(struct psmouse *psmouse)
return 0;
}
bool focaltech_supported(void)
{
return false;
}
#endif /* CONFIG_MOUSE_PS2_FOCALTECH */
......@@ -19,6 +19,5 @@
int focaltech_detect(struct psmouse *psmouse, bool set_properties);
int focaltech_init(struct psmouse *psmouse);
bool focaltech_supported(void);
#endif
......@@ -727,7 +727,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
if (max_proto > PSMOUSE_IMEX) {
if (!set_properties || focaltech_init(psmouse) == 0) {
if (focaltech_supported())
if (IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH))
return PSMOUSE_FOCALTECH;
/*
* Note that we need to also restrict
......@@ -776,7 +776,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
* Try activating protocol, but check if support is enabled first, since
* we try detecting Synaptics even when protocol is disabled.
*/
if (synaptics_supported() &&
if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) &&
(!set_properties || synaptics_init(psmouse) == 0)) {
return PSMOUSE_SYNAPTICS;
}
......@@ -801,7 +801,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
*/
if (max_proto > PSMOUSE_IMEX &&
cypress_detect(psmouse, set_properties) == 0) {
if (cypress_supported()) {
if (IS_ENABLED(CONFIG_MOUSE_PS2_CYPRESS)) {
if (cypress_init(psmouse) == 0)
return PSMOUSE_CYPRESS;
......
......@@ -1454,11 +1454,6 @@ int synaptics_init_relative(struct psmouse *psmouse)
return __synaptics_init(psmouse, false);
}
bool synaptics_supported(void)
{
return true;
}
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
void __init synaptics_module_init(void)
......@@ -1470,9 +1465,4 @@ int synaptics_init(struct psmouse *psmouse)
return -ENOSYS;
}
bool synaptics_supported(void)
{
return false;
}
#endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
......@@ -175,6 +175,5 @@ int synaptics_detect(struct psmouse *psmouse, bool set_properties);
int synaptics_init(struct psmouse *psmouse);
int synaptics_init_relative(struct psmouse *psmouse);
void synaptics_reset(struct psmouse *psmouse);
bool synaptics_supported(void);
#endif /* _SYNAPTICS_H */
......@@ -40,6 +40,7 @@ struct bfin_rotary_platform_data {
unsigned short debounce; /* 0..17 */
unsigned short mode;
unsigned short pm_wakeup;
unsigned short *pin_list;
};
/* CNT_CONFIG bitmasks */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment