Merge tag 'dmaengine-4.17-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we have couple of new drivers along with updates to drivers:

   - new drivers for the DesignWare AXI DMAC and MediaTek High-Speed DMA
     controllers

   - stm32 dma and qcom bam dma driver updates

   - norandom test option for dmatest"

* tag 'dmaengine-4.17-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (30 commits)
  dmaengine: stm32-dma: properly mask irq bits
  dmaengine: stm32-dma: fix max items per transfer
  dmaengine: stm32-dma: fix DMA IRQ status handling
  dmaengine: stm32-dma: Improve memory burst management
  dmaengine: stm32-dma: fix typo and reported checkpatch warnings
  dmaengine: stm32-dma: fix incomplete configuration in cyclic mode
  dmaengine: stm32-dma: threshold manages with bitfield feature
  dt-bindings: stm32-dma: introduce DMA features bitfield
  dt-bindings: rcar-dmac: Document r8a77470 support
  dmaengine: rcar-dmac: Fix too early/late system suspend/resume callbacks
  dmaengine: dw-axi-dmac: fix spelling mistake: "catched" -> "caught"
  dmaengine: edma: Check the memory allocation for the memcpy dma device
  dmaengine: at_xdmac: fix rare residue corruption
  dmaengine: mediatek: update MAINTAINERS entry with MediaTek DMA driver
  dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC
  dt-bindings: dmaengine: Add MediaTek High-Speed DMA controller bindings
  dt-bindings: Document the Synopsys DW AXI DMA bindings
  dmaengine: Introduce DW AXI DMAC driver
  dmaengine: pl330: fix a race condition in case of threaded irqs
  dmaengine: imx-sdma: fix pagefault when channel is disabled during interrupt
  ...

Documentation/devicetree/bindings/dma/mtk-hsdma.txt

+MediaTek High-Speed DMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible:	Must be one of
+		  "mediatek,mt7622-hsdma": for MT7622 SoC
+		  "mediatek,mt7623-hsdma": for MT7623 SoC
+- reg:		Should contain the register's base address and length.
+- interrupts:	Should contain a reference to the interrupt used by this
+		device.
+- clocks:	Should be the clock specifiers corresponding to the entry in
+		clock-names property.
+- clock-names:	Should contain "hsdma" entries.
+- power-domains: Phandle to the power domain that the device is part of
+- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
+		in dmas property of a client device represents the channel
+		number.
+Example:
+
+        hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7623-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.

Documentation/devicetree/bindings/dma/qcom_bam_dma.txt

@@ -15,6 +15,10 @@ Required properties:
   the secure world.
 - qcom,controlled-remotely : optional, indicates that the bam is controlled by
   remote proccessor i.e. execution environment.
+- num-channels : optional, indicates supported number of DMA channels in a
+  remotely controlled bam.
+- qcom,num-ees : optional, indicates supported number of Execution Environments
+  in a remotely controlled bam.
 
 Example:
 

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -18,6 +18,7 @@ Required Properties:
 	      Examples with soctypes are:
 		- "renesas,dmac-r8a7743" (RZ/G1M)
 		- "renesas,dmac-r8a7745" (RZ/G1E)
+		- "renesas,dmac-r8a77470" (RZ/G1C)
 		- "renesas,dmac-r8a7790" (R-Car H2)
 		- "renesas,dmac-r8a7791" (R-Car M2-W)
 		- "renesas,dmac-r8a7792" (R-Car V2H)
@@ -26,6 +27,7 @@ Required Properties:
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
 		- "renesas,dmac-r8a77970" (R-Car V3M)
+		- "renesas,dmac-r8a77980" (R-Car V3H)
 
 - reg: base address and length of the registers block for the DMAC
 

Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt

@@ -11,6 +11,7 @@ Required Properties:
 	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
 	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
 	  - "renesas,r8a7796-usb-dmac" (R-Car M3-W)
+	  - "renesas,r8a77965-usb-dmac" (R-Car M3-N)
 - reg: base address and length of the registers block for the DMAC
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt

+Synopsys DesignWare AXI DMA Controller
+
+Required properties:
+- compatible: "snps,axi-dma-1.01a"
+- reg: Address range of the DMAC registers. This should include
+  all of the per-channel registers.
+- interrupt: Should contain the DMAC interrupt number.
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device.
+- dma-channels: Number of channels supported by hardware.
+- snps,dma-masters: Number of AXI masters supported by the hardware.
+- snps,data-width: Maximum AXI data width supported by hardware.
+  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+- snps,priority: Priority of channel. Array size is equal to the number of
+  dma-channels. Priority value must be programmed within [0:dma-channels-1]
+  range. (0 - minimum priority)
+- snps,block-size: Maximum block size supported by the controller channel.
+  Array size is equal to the number of dma-channels.
+
+Optional properties:
+- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
+  in this property. If this property is missing the maximum AXI burst length
+  supported by DMAC is used. [1:256]
+
+Example:
+
+dmac: dma-controller@80000 {
+	compatible = "snps,axi-dma-1.01a";
+	reg = <0x80000 0x400>;
+	clocks = <&core_clk>, <&cfgr_clk>;
+	clock-names = "core-clk", "cfgr-clk";
+	interrupt-parent = <&intc>;
+	interrupts = <27>;
+
+	dma-channels = <4>;
+	snps,dma-masters = <2>;
+	snps,data-width = <3>;
+	snps,block-size = <4096 4096 4096 4096>;
+	snps,priority = <0 1 2 3>;
+	snps,axi-max-burst-len = <16>;
+};

Documentation/devicetree/bindings/dma/stm32-dma.txt

@@ -62,14 +62,14 @@ channel: a phandle to the DMA controller plus the following four integer cells:
 	0x1: medium
 	0x2: high
 	0x3: very high
-4. A 32bit mask specifying the DMA FIFO threshold configuration which are device
-   dependent:
- -bit 0-1: Fifo threshold
+4. A 32bit bitfield value specifying DMA features which are device dependent:
+ -bit 0-1: DMA FIFO threshold selection
 	0x0: 1/4 full FIFO
 	0x1: 1/2 full FIFO
 	0x2: 3/4 full FIFO
 	0x3: full FIFO
 
+
 Example:
 
 	usart1: serial@40011000 {

MAINTAINERS

@@ -8859,6 +8859,15 @@ M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
 F:	drivers/media/rc/mtk-cir.c
 
+MEDIATEK DMA DRIVER
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	dmaengine@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/dma/mtk-*
+F:	drivers/dma/mediatek/
+
 MEDIATEK PMIC LED DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
 S:	Maintained
@@ -13482,6 +13491,12 @@ S:	Maintained
 F:	drivers/gpio/gpio-dwapb.c
 F:	Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
 
+SYNOPSYS DESIGNWARE AXI DMAC DRIVER
+M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+S:	Maintained
+F:	drivers/dma/dwi-axi-dmac/
+F:	Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
+
 SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <vireshk@kernel.org>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>

drivers/dma/Kconfig

@@ -187,6 +187,16 @@ config DMA_SUN6I
 	help
 	  Support for the DMA engine first found in Allwinner A31 SoCs.
 
+config DW_AXI_DMAC
+	tristate "Synopsys DesignWare AXI DMA support"
+	depends on OF || COMPILE_TEST
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for Synopsys DesignWare AXI DMA controller.
+	  NOTE: This driver wasn't tested on 64 bit platform because
+	  of lack 64 bit platform with Synopsys DW AXI DMAC.
+
 config EP93XX_DMA
 	bool "Cirrus Logic EP93xx DMA support"
 	depends on ARCH_EP93XX || COMPILE_TEST
@@ -633,6 +643,8 @@ config ZX_DMA
 # driver files
 source "drivers/dma/bestcomm/Kconfig"
 
+source "drivers/dma/mediatek/Kconfig"
+
 source "drivers/dma/qcom/Kconfig"
 
 source "drivers/dma/dw/Kconfig"

drivers/dma/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
 obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
 obj-$(CONFIG_DMA_SUN4I) += sun4i-dma.o
 obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
+obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac/
 obj-$(CONFIG_DW_DMAC_CORE) += dw/
 obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
@@ -75,5 +76,6 @@ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
 obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
 
+obj-y += mediatek/
 obj-y += qcom/
 obj-y += xilinx/

drivers/dma/at_xdmac.c

@@ -1471,10 +1471,10 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
 	for (retry = 0; retry < AT_XDMAC_RESIDUE_MAX_RETRIES; retry++) {
 		check_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc;
 		rmb();
-		initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD);
-		rmb();
 		cur_ubc = at_xdmac_chan_read(atchan, AT_XDMAC_CUBC);
 		rmb();
+		initd = !!(at_xdmac_chan_read(atchan, AT_XDMAC_CC) & AT_XDMAC_CC_INITD);
+		rmb();
 		cur_nda = at_xdmac_chan_read(atchan, AT_XDMAC_CNDA) & 0xfffffffc;
 		rmb();
 

drivers/dma/dmatest.c

@@ -74,7 +74,11 @@ MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), "
 
 static bool noverify;
 module_param(noverify, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(noverify, "Disable random data setup and verification");
+MODULE_PARM_DESC(noverify, "Disable data verification (default: verify)");
+
+static bool norandom;
+module_param(norandom, bool, 0644);
+MODULE_PARM_DESC(norandom, "Disable random offset setup (default: random)");
 
 static bool verbose;
 module_param(verbose, bool, S_IRUGO | S_IWUSR);
@@ -103,6 +107,7 @@ struct dmatest_params {
 	unsigned int	pq_sources;
 	int		timeout;
 	bool		noverify;
+	bool		norandom;
 };
 
 /**
@@ -575,7 +580,7 @@ static int dmatest_func(void *data)
 			break;
 		}
 
-		if (params->noverify)
+		if (params->norandom)
 			len = params->buf_size;
 		else
 			len = dmatest_random() % params->buf_size + 1;
@@ -586,17 +591,19 @@ static int dmatest_func(void *data)
 
 		total_len += len;
 
-		if (params->noverify) {
+		if (params->norandom) {
 			src_off = 0;
 			dst_off = 0;
 		} else {
-			start = ktime_get();
 			src_off = dmatest_random() % (params->buf_size - len + 1);
 			dst_off = dmatest_random() % (params->buf_size - len + 1);
 
 			src_off = (src_off >> align) << align;
 			dst_off = (dst_off >> align) << align;
+		}
 
+		if (!params->noverify) {
+			start = ktime_get();
 			dmatest_init_srcs(thread->srcs, src_off, len,
 					  params->buf_size, is_memset);
 			dmatest_init_dsts(thread->dsts, dst_off, len,
@@ -975,6 +982,7 @@ static void run_threaded_test(struct dmatest_info *info)
 	params->pq_sources = pq_sources;
 	params->timeout = timeout;
 	params->noverify = noverify;
+	params->norandom = norandom;
 
 	request_channels(info, DMA_MEMCPY);
 	request_channels(info, DMA_MEMSET);

drivers/dma/dw-axi-dmac/Makefile

+obj-$(CONFIG_DW_AXI_DMAC) += dw-axi-dmac-platform.o

drivers/dma/edma.c

@@ -1876,6 +1876,11 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
 
 	if (memcpy_channels) {
 		m_ddev = devm_kzalloc(ecc->dev, sizeof(*m_ddev), GFP_KERNEL);
+		if (!m_ddev) {
+			dev_warn(ecc->dev, "memcpy is disabled due to OoM\n");
+			memcpy_channels = NULL;
+			goto ch_setup;
+		}
 		ecc->dma_memcpy = m_ddev;
 
 		dma_cap_zero(m_ddev->cap_mask);
@@ -1903,6 +1908,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
 		dev_info(ecc->dev, "memcpy is disabled\n");
 	}
 
+ch_setup:
 	for (i = 0; i < ecc->num_channels; i++) {
 		struct edma_chan *echan = &ecc->slave_chans[i];
 		echan->ch_num = EDMA_CTLR_CHAN(ecc->id, i);

drivers/dma/imx-sdma.c

@@ -338,6 +338,7 @@ struct sdma_channel {
 	unsigned int			chn_real_count;
 	struct tasklet_struct		tasklet;
 	struct imx_dma_data		data;
+	bool				enabled;
 };
 
 #define IMX_DMA_SG_LOOP		BIT(0)
@@ -596,7 +597,14 @@ static int sdma_config_ownership(struct sdma_channel *sdmac,
 
 static void sdma_enable_channel(struct sdma_engine *sdma, int channel)
 {
+	unsigned long flags;
+	struct sdma_channel *sdmac = &sdma->channel[channel];
+
 	writel(BIT(channel), sdma->regs + SDMA_H_START);
+
+	spin_lock_irqsave(&sdmac->lock, flags);
+	sdmac->enabled = true;
+	spin_unlock_irqrestore(&sdmac->lock, flags);
 }
 
 /*
@@ -685,6 +693,14 @@ static void sdma_update_channel_loop(struct sdma_channel *sdmac)
 	struct sdma_buffer_descriptor *bd;
 	int error = 0;
 	enum dma_status	old_status = sdmac->status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdmac->lock, flags);
+	if (!sdmac->enabled) {
+		spin_unlock_irqrestore(&sdmac->lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&sdmac->lock, flags);
 
 	/*
 	 * loop mode. Iterate over descriptors, re-setup them and
@@ -938,10 +954,15 @@ static int sdma_disable_channel(struct dma_chan *chan)
 	struct sdma_channel *sdmac = to_sdma_chan(chan);
 	struct sdma_engine *sdma = sdmac->sdma;
 	int channel = sdmac->channel;
+	unsigned long flags;
 
 	writel_relaxed(BIT(channel), sdma->regs + SDMA_H_STATSTOP);
 	sdmac->status = DMA_ERROR;
 
+	spin_lock_irqsave(&sdmac->lock, flags);
+	sdmac->enabled = false;
+	spin_unlock_irqrestore(&sdmac->lock, flags);
+
 	return 0;
 }
 

drivers/dma/mediatek/Kconfig

+
+config MTK_HSDMA
+	tristate "MediaTek High-Speed DMA controller support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	---help---
+	  Enable support for High-Speed DMA controller on MediaTek
+	  SoCs.
+
+	  This controller provides the channels which is dedicated to
+	  memory-to-memory transfer to offload from CPU through ring-
+	  based descriptor management.

drivers/dma/mediatek/Makefile

+obj-$(CONFIG_MTK_HSDMA) += mtk-hsdma.o

drivers/dma/pl330.c

@@ -1510,7 +1510,7 @@ static void pl330_dotask(unsigned long data)
 /* Returns 1 if state was updated, 0 otherwise */
 static int pl330_update(struct pl330_dmac *pl330)
 {
-	struct dma_pl330_desc *descdone, *tmp;
+	struct dma_pl330_desc *descdone;
 	unsigned long flags;
 	void __iomem *regs;
 	u32 val;
@@ -1588,7 +1588,9 @@ static int pl330_update(struct pl330_dmac *pl330)
 	}
 
 	/* Now that we are in no hurry, do the callbacks */
-	list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
+	while (!list_empty(&pl330->req_done)) {
+		descdone = list_first_entry(&pl330->req_done,
+					    struct dma_pl330_desc, rqd);
 		list_del(&descdone->rqd);
 		spin_unlock_irqrestore(&pl330->lock, flags);
 		dma_pl330_rqcb(descdone, PL330_ERR_NONE);

drivers/dma/qcom/bam_dma.c

@@ -393,6 +393,7 @@ struct bam_device {
 	struct device_dma_parameters dma_parms;
 	struct bam_chan *channels;
 	u32 num_channels;
+	u32 num_ees;
 
 	/* execution environment ID, from DT */
 	u32 ee;
@@ -934,12 +935,15 @@ static void bam_apply_new_config(struct bam_chan *bchan,
 	struct bam_device *bdev = bchan->bdev;
 	u32 maxburst;
 
-	if (dir == DMA_DEV_TO_MEM)
-		maxburst = bchan->slave.src_maxburst;
-	else
-		maxburst = bchan->slave.dst_maxburst;
+	if (!bdev->controlled_remotely) {
+		if (dir == DMA_DEV_TO_MEM)
+			maxburst = bchan->slave.src_maxburst;
+		else
+			maxburst = bchan->slave.dst_maxburst;
 
-	writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
+		writel_relaxed(maxburst,
+			       bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
+	}
 
 	bchan->reconfigure = 0;
 }
@@ -1128,15 +1132,19 @@ static int bam_init(struct bam_device *bdev)
 	u32 val;
 
 	/* read revision and configuration information */
-	val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT;
-	val &= NUM_EES_MASK;
+	if (!bdev->num_ees) {
+		val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION));
+		bdev->num_ees = (val >> NUM_EES_SHIFT) & NUM_EES_MASK;
+	}
 
 	/* check that configured EE is within range */
-	if (bdev->ee >= val)
+	if (bdev->ee >= bdev->num_ees)
 		return -EINVAL;
 
-	val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
-	bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+	if (!bdev->num_channels) {
+		val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
+		bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+	}
 
 	if (bdev->controlled_remotely)
 		return 0;
@@ -1232,9 +1240,25 @@ static int bam_dma_probe(struct platform_device *pdev)
 	bdev->controlled_remotely = of_property_read_bool(pdev->dev.of_node,
 						"qcom,controlled-remotely");
 
+	if (bdev->controlled_remotely) {
+		ret = of_property_read_u32(pdev->dev.of_node, "num-channels",
+					   &bdev->num_channels);
+		if (ret)
+			dev_err(bdev->dev, "num-channels unspecified in dt\n");
+
+		ret = of_property_read_u32(pdev->dev.of_node, "qcom,num-ees",
+					   &bdev->num_ees);
+		if (ret)
+			dev_err(bdev->dev, "num-ees unspecified in dt\n");
+	}
+
 	bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
-	if (IS_ERR(bdev->bamclk))
-		return PTR_ERR(bdev->bamclk);
+	if (IS_ERR(bdev->bamclk)) {
+		if (!bdev->controlled_remotely)
+			return PTR_ERR(bdev->bamclk);
+
+		bdev->bamclk = NULL;
+	}
 
 	ret = clk_prepare_enable(bdev->bamclk);
 	if (ret) {
@@ -1309,6 +1333,11 @@ static int bam_dma_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_unregister_dma;
 
+	if (bdev->controlled_remotely) {
+		pm_runtime_disable(&pdev->dev);
+		return 0;
+	}
+
 	pm_runtime_irq_safe(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, BAM_DMA_AUTOSUSPEND_DELAY);
 	pm_runtime_use_autosuspend(&pdev->dev);
@@ -1392,7 +1421,8 @@ static int __maybe_unused bam_dma_suspend(struct device *dev)
 {
 	struct bam_device *bdev = dev_get_drvdata(dev);
 
-	pm_runtime_force_suspend(dev);
+	if (!bdev->controlled_remotely)
+		pm_runtime_force_suspend(dev);
 
 	clk_unprepare(bdev->bamclk);
 
@@ -1408,7 +1438,8 @@ static int __maybe_unused bam_dma_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	pm_runtime_force_resume(dev);
+	if (!bdev->controlled_remotely)
+		pm_runtime_force_resume(dev);
 
 	return 0;
 }

drivers/dma/sh/rcar-dmac.c

@@ -1301,8 +1301,17 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan,
 	 * If the cookie doesn't correspond to the currently running transfer
 	 * then the descriptor hasn't been processed yet, and the residue is
 	 * equal to the full descriptor size.
+	 * Also, a client driver is possible to call this function before
+	 * rcar_dmac_isr_channel_thread() runs. In this case, the "desc.running"
+	 * will be the next descriptor, and the done list will appear. So, if
+	 * the argument cookie matches the done list's cookie, we can assume
+	 * the residue is zero.
 	 */
 	if (cookie != desc->async_tx.cookie) {
+		list_for_each_entry(desc, &chan->desc.done, node) {
+			if (cookie == desc->async_tx.cookie)
+				return 0;
+		}
 		list_for_each_entry(desc, &chan->desc.pending, node) {
 			if (cookie == desc->async_tx.cookie)
 				return desc->size;
@@ -1677,8 +1686,8 @@ static const struct dev_pm_ops rcar_dmac_pm = {
 	 *   - Wait for the current transfer to complete and stop the device,
 	 *   - Resume transfers, if any.
 	 */
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-				     pm_runtime_force_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(rcar_dmac_runtime_suspend, rcar_dmac_runtime_resume,
 			   NULL)
 };

include/linux/dmaengine.h

@@ -470,7 +470,11 @@ typedef void (*dma_async_tx_callback_result)(void *dma_async_param,
 				const struct dmaengine_result *result);
 
 struct dmaengine_unmap_data {
+#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID)
+	u16 map_cnt;
+#else
 	u8 map_cnt;
+#endif
 	u8 to_cnt;
 	u8 from_cnt;
 	u8 bidi_cnt;