Commit 1b1247dd authored by Laxman Dewangan's avatar Laxman Dewangan Committed by Samuel Ortiz

mfd: Add support for RICOH PMIC RC5T583

Ricoh power management IC  RC5T583 contains is multi
functional device having multiple sub devices inside this.
This device has multiple dcdc/ldo regulators, gpios, interrupt
controllers, on-key, RTCs, ADCs.
This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc.
Signed-off-by: default avatarLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent bc628fd1
...@@ -846,6 +846,20 @@ config MFD_INTEL_MSIC ...@@ -846,6 +846,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc. Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms. devices used in Intel Medfield platforms.
config MFD_RC5T583
bool "Ricoh RC5T583 Power Management system device"
depends on I2C && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
help
Select this option to get support for the RICOH583 Power
Management system device.
This driver provides common support for accessing the device
through i2c interface. The device supports multiple sub-devices
like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
Additional drivers must be enabled in order to use the
different functionality of the device.
endmenu endmenu
endif endif
......
...@@ -112,4 +112,5 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o ...@@ -112,4 +112,5 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o obj-$(CONFIG_MFD_S5M_CORE) += s5m-core.o s5m-irq.o
This diff is collapsed.
This diff is collapsed.
/*
* Core driver interface to access RICOH_RC5T583 power management chip.
*
* Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
* Author: Laxman dewangan <ldewangan@nvidia.com>
*
* Based on code
* Copyright (C) 2011 RICOH COMPANY,LTD
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __LINUX_MFD_RC5T583_H
#define __LINUX_MFD_RC5T583_H
#include <linux/mutex.h>
#include <linux/types.h>
#define RC5T583_MAX_REGS 0xF8
/* Maximum number of main interrupts */
#define MAX_MAIN_INTERRUPT 5
#define RC5T583_MAX_GPEDGE_REG 2
#define RC5T583_MAX_INTERRUPT_MASK_REGS 9
/* Interrupt enable register */
#define RC5T583_INT_EN_SYS1 0x19
#define RC5T583_INT_EN_SYS2 0x1D
#define RC5T583_INT_EN_DCDC 0x41
#define RC5T583_INT_EN_RTC 0xED
#define RC5T583_INT_EN_ADC1 0x90
#define RC5T583_INT_EN_ADC2 0x91
#define RC5T583_INT_EN_ADC3 0x92
/* Interrupt status registers (monitor regs in Ricoh)*/
#define RC5T583_INTC_INTPOL 0xAD
#define RC5T583_INTC_INTEN 0xAE
#define RC5T583_INTC_INTMON 0xAF
#define RC5T583_INT_MON_GRP 0xAF
#define RC5T583_INT_MON_SYS1 0x1B
#define RC5T583_INT_MON_SYS2 0x1F
#define RC5T583_INT_MON_DCDC 0x43
#define RC5T583_INT_MON_RTC 0xEE
/* Interrupt clearing registers */
#define RC5T583_INT_IR_SYS1 0x1A
#define RC5T583_INT_IR_SYS2 0x1E
#define RC5T583_INT_IR_DCDC 0x42
#define RC5T583_INT_IR_RTC 0xEE
#define RC5T583_INT_IR_ADCL 0x94
#define RC5T583_INT_IR_ADCH 0x95
#define RC5T583_INT_IR_ADCEND 0x96
#define RC5T583_INT_IR_GPIOR 0xA9
#define RC5T583_INT_IR_GPIOF 0xAA
/* Sleep sequence registers */
#define RC5T583_SLPSEQ1 0x21
#define RC5T583_SLPSEQ2 0x22
#define RC5T583_SLPSEQ3 0x23
#define RC5T583_SLPSEQ4 0x24
#define RC5T583_SLPSEQ5 0x25
#define RC5T583_SLPSEQ6 0x26
#define RC5T583_SLPSEQ7 0x27
#define RC5T583_SLPSEQ8 0x28
#define RC5T583_SLPSEQ9 0x29
#define RC5T583_SLPSEQ10 0x2A
#define RC5T583_SLPSEQ11 0x2B
/* Regulator registers */
#define RC5T583_REG_DC0CTL 0x30
#define RC5T583_REG_DC0DAC 0x31
#define RC5T583_REG_DC0LATCTL 0x32
#define RC5T583_REG_SR0CTL 0x33
#define RC5T583_REG_DC1CTL 0x34
#define RC5T583_REG_DC1DAC 0x35
#define RC5T583_REG_DC1LATCTL 0x36
#define RC5T583_REG_SR1CTL 0x37
#define RC5T583_REG_DC2CTL 0x38
#define RC5T583_REG_DC2DAC 0x39
#define RC5T583_REG_DC2LATCTL 0x3A
#define RC5T583_REG_SR2CTL 0x3B
#define RC5T583_REG_DC3CTL 0x3C
#define RC5T583_REG_DC3DAC 0x3D
#define RC5T583_REG_DC3LATCTL 0x3E
#define RC5T583_REG_SR3CTL 0x3F
#define RC5T583_REG_LDOEN1 0x50
#define RC5T583_REG_LDOEN2 0x51
#define RC5T583_REG_LDODIS1 0x52
#define RC5T583_REG_LDODIS2 0x53
#define RC5T583_REG_LDO0DAC 0x54
#define RC5T583_REG_LDO1DAC 0x55
#define RC5T583_REG_LDO2DAC 0x56
#define RC5T583_REG_LDO3DAC 0x57
#define RC5T583_REG_LDO4DAC 0x58
#define RC5T583_REG_LDO5DAC 0x59
#define RC5T583_REG_LDO6DAC 0x5A
#define RC5T583_REG_LDO7DAC 0x5B
#define RC5T583_REG_LDO8DAC 0x5C
#define RC5T583_REG_LDO9DAC 0x5D
#define RC5T583_REG_DC0DAC_DS 0x60
#define RC5T583_REG_DC1DAC_DS 0x61
#define RC5T583_REG_DC2DAC_DS 0x62
#define RC5T583_REG_DC3DAC_DS 0x63
#define RC5T583_REG_LDO0DAC_DS 0x64
#define RC5T583_REG_LDO1DAC_DS 0x65
#define RC5T583_REG_LDO2DAC_DS 0x66
#define RC5T583_REG_LDO3DAC_DS 0x67
#define RC5T583_REG_LDO4DAC_DS 0x68
#define RC5T583_REG_LDO5DAC_DS 0x69
#define RC5T583_REG_LDO6DAC_DS 0x6A
#define RC5T583_REG_LDO7DAC_DS 0x6B
#define RC5T583_REG_LDO8DAC_DS 0x6C
#define RC5T583_REG_LDO9DAC_DS 0x6D
/* GPIO register base address */
#define RC5T583_GPIO_IOSEL 0xA0
#define RC5T583_GPIO_PDEN 0xA1
#define RC5T583_GPIO_IOOUT 0xA2
#define RC5T583_GPIO_PGSEL 0xA3
#define RC5T583_GPIO_GPINV 0xA4
#define RC5T583_GPIO_GPDEB 0xA5
#define RC5T583_GPIO_GPEDGE1 0xA6
#define RC5T583_GPIO_GPEDGE2 0xA7
#define RC5T583_GPIO_EN_INT 0xA8
#define RC5T583_GPIO_MON_IOIN 0xAB
#define RC5T583_GPIO_GPOFUNC 0xAC
/* RICOH_RC5T583 IRQ definitions */
enum {
RC5T583_IRQ_ONKEY,
RC5T583_IRQ_ACOK,
RC5T583_IRQ_LIDOPEN,
RC5T583_IRQ_PREOT,
RC5T583_IRQ_CLKSTP,
RC5T583_IRQ_ONKEY_OFF,
RC5T583_IRQ_WD,
RC5T583_IRQ_EN_PWRREQ1,
RC5T583_IRQ_EN_PWRREQ2,
RC5T583_IRQ_PRE_VINDET,
RC5T583_IRQ_DC0LIM,
RC5T583_IRQ_DC1LIM,
RC5T583_IRQ_DC2LIM,
RC5T583_IRQ_DC3LIM,
RC5T583_IRQ_CTC,
RC5T583_IRQ_YALE,
RC5T583_IRQ_DALE,
RC5T583_IRQ_WALE,
RC5T583_IRQ_AIN1L,
RC5T583_IRQ_AIN2L,
RC5T583_IRQ_AIN3L,
RC5T583_IRQ_VBATL,
RC5T583_IRQ_VIN3L,
RC5T583_IRQ_VIN8L,
RC5T583_IRQ_AIN1H,
RC5T583_IRQ_AIN2H,
RC5T583_IRQ_AIN3H,
RC5T583_IRQ_VBATH,
RC5T583_IRQ_VIN3H,
RC5T583_IRQ_VIN8H,
RC5T583_IRQ_ADCEND,
RC5T583_IRQ_GPIO0,
RC5T583_IRQ_GPIO1,
RC5T583_IRQ_GPIO2,
RC5T583_IRQ_GPIO3,
RC5T583_IRQ_GPIO4,
RC5T583_IRQ_GPIO5,
RC5T583_IRQ_GPIO6,
RC5T583_IRQ_GPIO7,
/* Should be last entry */
RC5T583_MAX_IRQS,
};
/* Ricoh583 gpio definitions */
enum {
RC5T583_GPIO0,
RC5T583_GPIO1,
RC5T583_GPIO2,
RC5T583_GPIO3,
RC5T583_GPIO4,
RC5T583_GPIO5,
RC5T583_GPIO6,
RC5T583_GPIO7,
/* Should be last entry */
RC5T583_MAX_GPIO,
};
enum {
RC5T583_DS_NONE,
RC5T583_DS_DC0,
RC5T583_DS_DC1,
RC5T583_DS_DC2,
RC5T583_DS_DC3,
RC5T583_DS_LDO0,
RC5T583_DS_LDO1,
RC5T583_DS_LDO2,
RC5T583_DS_LDO3,
RC5T583_DS_LDO4,
RC5T583_DS_LDO5,
RC5T583_DS_LDO6,
RC5T583_DS_LDO7,
RC5T583_DS_LDO8,
RC5T583_DS_LDO9,
RC5T583_DS_PSO0,
RC5T583_DS_PSO1,
RC5T583_DS_PSO2,
RC5T583_DS_PSO3,
RC5T583_DS_PSO4,
RC5T583_DS_PSO5,
RC5T583_DS_PSO6,
RC5T583_DS_PSO7,
/* Should be last entry */
RC5T583_DS_MAX,
};
/*
* Ricoh pmic RC5T583 supports sleep through two external controls.
* The output of gpios and regulator can be enable/disable through
* this external signals.
*/
enum {
RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
};
struct rc5t583 {
struct device *dev;
struct regmap *regmap;
int chip_irq;
int irq_base;
struct mutex irq_lock;
unsigned long group_irq_en[MAX_MAIN_INTERRUPT];
/* For main interrupt bits in INTC */
uint8_t intc_inten_reg;
/* For group interrupt bits and address */
uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
/* For gpio edge */
uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG];
};
/*
* rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
* The board specific data is provided through this structure.
* @irq_base: Irq base number on which this device registers their interrupts.
* @enable_shutdown: Enable shutdown through the input pin "shutdown".
*/
struct rc5t583_platform_data {
int irq_base;
bool enable_shutdown;
};
int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
int rc5t583_set_bits(struct device *dev, unsigned int reg,
unsigned int bit_mask);
int rc5t583_clear_bits(struct device *dev, unsigned int reg,
unsigned int bit_mask);
int rc5t583_update(struct device *dev, unsigned int reg,
unsigned int val, unsigned int mask);
int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
int ext_pwr_req, int deepsleep_slot_nr);
int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
int rc5t583_irq_exit(struct rc5t583 *rc5t583);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment