ip6_gre: Fix MTU setting for ip6gretap

When creat an ip6gretap interface with an unreachable route,
the MTU is about 14 bytes larger than what was needed.

If the remote address is reachable:
ping6 2001:0:130::1 -c 2
PING 2001:0:130::1(2001:0:130::1) 56 data bytes
64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms
64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6/ip6_gre.c

@@ -1027,6 +1027,8 @@ static int ip6gre_tunnel_init_common(struct net_device *dev)
 
 	dev->hard_header_len = LL_MAX_HEADER + t_hlen;
 	dev->mtu = ETH_DATA_LEN - t_hlen;
+	if (dev->type == ARPHRD_ETHER)
+		dev->mtu -= ETH_HLEN;
 	if (!(tunnel->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
 		dev->mtu -= 8;