Commit 1b38da26 authored by Daniel Mack's avatar Daniel Mack Committed by Vinod Koul

dma: mmp_pdma: add support for residue reporting

A channel can accommodate more than one transaction, each consisting of
multiple descriptors, the last of which has the DCMD_ENDIRQEN bit set.

In order to report the channel's residue, we hence have to walk the
list of running descriptors, look for those which match the cookie,
and then try to find the descriptor which defines upper and lower
boundaries that embrace the current transport pointer. Once it is found,
walk forward until we find the descriptor that tells us about the end of
a transaction via a set DCMD_ENDIRQEN bit.
Signed-off-by: default avatarDaniel Mack <zonque@gmail.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent c906a3ec
......@@ -29,8 +29,8 @@
#define DALGN 0x00a0
#define DINT 0x00f0
#define DDADR 0x0200
#define DSADR 0x0204
#define DTADR 0x0208
#define DSADR(n) (0x0204 + ((n) << 4))
#define DTADR(n) (0x0208 + ((n) << 4))
#define DCMD 0x020c
#define DCSR_RUN BIT(31) /* Run Bit (read / write) */
......@@ -748,11 +748,92 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
return 0;
}
static unsigned int mmp_pdma_residue(struct mmp_pdma_chan *chan,
dma_cookie_t cookie)
{
struct mmp_pdma_desc_sw *sw;
u32 curr, residue = 0;
bool passed = false;
bool cyclic = chan->cyclic_first != NULL;
/*
* If the channel does not have a phy pointer anymore, it has already
* been completed. Therefore, its residue is 0.
*/
if (!chan->phy)
return 0;
if (chan->dir == DMA_DEV_TO_MEM)
curr = readl(chan->phy->base + DTADR(chan->phy->idx));
else
curr = readl(chan->phy->base + DSADR(chan->phy->idx));
list_for_each_entry(sw, &chan->chain_running, node) {
u32 start, end, len;
if (chan->dir == DMA_DEV_TO_MEM)
start = sw->desc.dtadr;
else
start = sw->desc.dsadr;
len = sw->desc.dcmd & DCMD_LENGTH;
end = start + len;
/*
* 'passed' will be latched once we found the descriptor which
* lies inside the boundaries of the curr pointer. All
* descriptors that occur in the list _after_ we found that
* partially handled descriptor are still to be processed and
* are hence added to the residual bytes counter.
*/
if (passed) {
residue += len;
} else if (curr >= start && curr <= end) {
residue += end - curr;
passed = true;
}
/*
* Descriptors that have the ENDIRQEN bit set mark the end of a
* transaction chain, and the cookie assigned with it has been
* returned previously from mmp_pdma_tx_submit().
*
* In case we have multiple transactions in the running chain,
* and the cookie does not match the one the user asked us
* about, reset the state variables and start over.
*
* This logic does not apply to cyclic transactions, where all
* descriptors have the ENDIRQEN bit set, and for which we
* can't have multiple transactions on one channel anyway.
*/
if (cyclic || !(sw->desc.dcmd & DCMD_ENDIRQEN))
continue;
if (sw->async_tx.cookie == cookie) {
return residue;
} else {
residue = 0;
passed = false;
}
}
/* We should only get here in case of cyclic transactions */
return residue;
}
static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
dma_cookie_t cookie,
struct dma_tx_state *txstate)
{
return dma_cookie_status(dchan, cookie, txstate);
struct mmp_pdma_chan *chan = to_mmp_pdma_chan(dchan);
enum dma_status ret;
ret = dma_cookie_status(dchan, cookie, txstate);
if (likely(ret != DMA_ERROR))
dma_set_residue(txstate, mmp_pdma_residue(chan, cookie));
return ret;
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment