Merge tag 'qcom-arm64-for-4.5' of...

Merge tag 'qcom-arm64-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Qualcomm ARM64 Updates for v4.5

* Add fixed rate oscillators to dts
* Fixup PMIC alias and properties
* Change 8916-MTP compatible to be compliant with new scheme
* Fix 8x16 UART pinctrl configuration
* Add SMEM, RPM/SMD, and PM8916 support on MSM8916

* tag 'qcom-arm64-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: Add PM8916 support on MSM8916
  arm64: dts: qcom: Add RPM/SMD support on MSM8916
  arm64: dts: qcom: Add MSM8916 SMEM nodes
  arm64: dts: set the default i2c pin drive strength to 16mA
  arm64: dts: fix the i2c aliasing to match to schematics.
  arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators
  arm64: dts: qcom: Alias pm8916 on msm8916 devices
  arm64: dts: qcom: Make msm8916-mtp compatible string compliant
  arm64: dts: qcom: 8x16: UART1 and UART2 use DMA for RX and TX
  arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

@@ -20,6 +20,10 @@ / {
 	aliases {
 		serial0 = &blsp1_uart2;
 		serial1 = &blsp1_uart1;
+		usid0 = &pm8916_0;
+		i2c0	= &blsp_i2c2;
+		i2c1	= &blsp_i2c6;
+		i2c3	= &blsp_i2c4;
 	};
 
 	chosen {

arch/arm64/boot/dts/qcom/msm8916-mtp.dts

@@ -17,6 +17,6 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
-	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1",
 			"qcom,msm8916", "qcom,mtp";
 };

arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi

@@ -17,6 +17,7 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		usid0 = &pm8916_0;
 	};
 
 	chosen {

arch/arm64/boot/dts/qcom/msm8916-pins.dtsi

@@ -16,10 +16,13 @@ &msmgpio {
 	blsp1_uart1_default: blsp1_uart1_default {
 		pinmux {
 			function = "blsp_uart1";
-			pins = "gpio0", "gpio1";
+			//	TX, RX, CTS_N, RTS_N
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 		};
 		pinconf {
-			pins = "gpio0", "gpio1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 			drive-strength = <16>;
 			bias-disable;
 		};
@@ -28,10 +31,12 @@ pinconf {
 	blsp1_uart1_sleep: blsp1_uart1_sleep {
 		pinmux {
 			function = "gpio";
-			pins = "gpio0", "gpio1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 		};
 		pinconf {
-			pins = "gpio0", "gpio1";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
 			drive-strength = <2>;
 			bias-pull-down;
 		};
@@ -272,7 +277,7 @@ pinmux {
 		};
 		pinconf {
 			pins = "gpio6", "gpio7";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};
@@ -296,7 +301,7 @@ pinmux {
 		};
 		pinconf {
 			pins = "gpio14", "gpio15";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};
@@ -320,7 +325,7 @@ pinmux {
 		};
 		pinconf {
 			pins = "gpio22", "gpio23";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};

arch/arm64/boot/dts/qcom/msm8916.dtsi

@@ -37,6 +37,22 @@ memory {
 		reg = <0 0 0 0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		reserve_aligned@86000000 {
+			reg = <0x0 0x86000000 0x0 0x0300000>;
+			no-map;
+		};
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x0100000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -74,6 +90,29 @@ timer {
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,21 +142,46 @@ gcc: qcom,gcc@1800000 {
 			reg = <0x1800000 0x80000>;
 		};
 
+		tcsr_mutex_regs: syscon@1905000 {
+			compatible = "syscon";
+			reg = <0x1905000 0x20000>;
+		};
+
+		tcsr_mutex: hwlock {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_regs 0 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x60000 0x8000>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78af000 0x200>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
+		apcs: syscon@b011000 {
+			compatible = "syscon";
+			reg = <0x0b011000 0x1000>;
+		};
+
 		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -438,6 +502,49 @@ rng@22000 {
 			clock-names = "core";
 		};
 	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				pm8916-regulators {
+					compatible = "qcom,rpm-pm8916-regulators";
+
+					pm8916_s1: s1 {};
+					pm8916_s2: s2 {};
+					pm8916_s3: s3 {};
+					pm8916_s4: s4 {};
+
+					pm8916_l1: l1 {};
+					pm8916_l2: l2 {};
+					pm8916_l3: l3 {};
+					pm8916_l4: l4 {};
+					pm8916_l5: l5 {};
+					pm8916_l6: l6 {};
+					pm8916_l7: l7 {};
+					pm8916_l8: l8 {};
+					pm8916_l9: l9 {};
+					pm8916_l10: l10 {};
+					pm8916_l11: l11 {};
+					pm8916_l12: l12 {};
+					pm8916_l13: l13 {};
+					pm8916_l14: l14 {};
+					pm8916_l15: l15 {};
+					pm8916_l16: l16 {};
+					pm8916_l17: l17 {};
+					pm8916_l18: l18 {};
+				};
+			};
+		};
+	};
 };
 
 #include "msm8916-pins.dtsi"

arch/arm64/boot/dts/qcom/pm8916.dtsi

@@ -4,8 +4,8 @@
 
 &spmi_bus {
 
-	usid0: pm8916@0 {
-		compatible = "qcom,spmi-pmic";
+	pm8916_0: pm8916@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -90,7 +90,7 @@ ref_vdd {
 		};
 	};
 
-	usid1: pm8916@1 {
+	pm8916_1: pm8916@1 {
 		compatible = "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;