dmaengine: remove zte zx driver

The zte zx platform is getting removed, so this driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20210120131859.2056308-3-arnd@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/dma/zxdma.txt

-* ZTE ZX296702 DMA controller
-
-Required properties:
-- compatible: Should be "zte,zx296702-dma"
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel
-- #dma-cells: see dma.txt, should be 1, para number
-- dma-channels: physical channels supported
-- dma-requests: virtual channels supported, each virtual channel
-		have specific request line
-- clocks: clock required
-
-Example:
-
-Controller:
-	dma: dma-controller@09c00000{
-		compatible = "zte,zx296702-dma";
-		reg = <0x09c00000 0x1000>;
-		clocks = <&topclk ZX296702_DMA_ACLK>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		#dma-cells = <1>;
-		dma-channels = <24>;
-		dma-requests = <24>;
-	};
-
-Client:
-Use specific request line passing from dmax
-For example, spdif0 tx channel request line is 4
-	spdif0: spdif0@b004000 {
-		#sound-dai-cells = <0>;
-		compatible = "zte,zx296702-spdif";
-		reg = <0x0b004000 0x1000>;
-		clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
-		clock-names = "tx";
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 4>;
-		dma-names = "tx";
-	}

drivers/dma/Kconfig

@@ -703,15 +703,6 @@ config XILINX_ZYNQMP_DPDMA
 	  driver provides the dmaengine required by the DisplayPort subsystem
 	  display driver.
 
-config ZX_DMA
-	tristate "ZTE ZX DMA support"
-	depends on ARCH_ZX || COMPILE_TEST
-	select DMA_ENGINE
-	select DMA_VIRTUAL_CHANNELS
-	help
-	  Support the DMA engine for ZTE ZX family platform devices.
-
-
 # driver files
 source "drivers/dma/bestcomm/Kconfig"
 

drivers/dma/Makefile

@@ -78,7 +78,6 @@ obj-$(CONFIG_TIMB_DMA) += timb_dma.o
 obj-$(CONFIG_UNIPHIER_MDMAC) += uniphier-mdmac.o
 obj-$(CONFIG_UNIPHIER_XDMAC) += uniphier-xdmac.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
-obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
 obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
 obj-$(CONFIG_INTEL_LDMA) += lgm/