qlge: Add ethtool get/set pause parameter.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/qlge/qlge.h

@@ -1645,6 +1645,8 @@ int ql_mb_about_fw(struct ql_adapter *qdev);
 void ql_link_on(struct ql_adapter *qdev);
 void ql_link_off(struct ql_adapter *qdev);
 int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_mb_get_port_cfg(struct ql_adapter *qdev);
+int ql_mb_set_port_cfg(struct ql_adapter *qdev);
 int ql_wait_fifo_empty(struct ql_adapter *qdev);
 
 #if 1

drivers/net/qlge/qlge_ethtool.c

@@ -424,6 +424,37 @@ static int ql_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *c)
 	return ql_update_ring_coalescing(qdev);
 }
 
+static void ql_get_pauseparam(struct net_device *netdev,
+			struct ethtool_pauseparam *pause)
+{
+	struct ql_adapter *qdev = netdev_priv(netdev);
+
+	ql_mb_get_port_cfg(qdev);
+	if (qdev->link_config & CFG_PAUSE_STD) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int ql_set_pauseparam(struct net_device *netdev,
+			struct ethtool_pauseparam *pause)
+{
+	struct ql_adapter *qdev = netdev_priv(netdev);
+	int status = 0;
+
+	if ((pause->rx_pause) && (pause->tx_pause))
+		qdev->link_config |= CFG_PAUSE_STD;
+	else if (!pause->rx_pause && !pause->tx_pause)
+		qdev->link_config &= ~CFG_PAUSE_STD;
+	else
+		return -EINVAL;
+
+	status = ql_mb_set_port_cfg(qdev);
+	if (status)
+		return status;
+	return status;
+}
+
 static u32 ql_get_rx_csum(struct net_device *netdev)
 {
 	struct ql_adapter *qdev = netdev_priv(netdev);
@@ -468,6 +499,8 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.get_msglevel = ql_get_msglevel,
 	.set_msglevel = ql_set_msglevel,
 	.get_link = ethtool_op_get_link,
+	.get_pauseparam		 = ql_get_pauseparam,
+	.set_pauseparam		 = ql_set_pauseparam,
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,

drivers/net/qlge/qlge_mpi.c

@@ -637,7 +637,7 @@ int ql_mb_idc_ack(struct ql_adapter *qdev)
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
+int ql_mb_set_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -672,7 +672,7 @@ static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
+int ql_mb_get_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;