Commit 1daaceb2 authored by Wei Ni's avatar Wei Ni Committed by Jean Delvare

hwmon: (lm90) Add support for TI TMP451

TI TMP451 is mostly compatible with ADT7461, except for
local temperature low byte and max conversion rate.
Add support to the LM90 driver.
Signed-off-by: default avatarWei Ni <wni@nvidia.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 40465d94
......@@ -122,6 +122,12 @@ Supported chips:
Prefix: 'g781'
Addresses scanned: I2C 0x4c, 0x4d
Datasheet: Not publicly available from GMT
* Texas Instruments TMP451
Prefix: 'tmp451'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at TI website
http://www.ti.com/litv/pdf/sbos686
Author: Jean Delvare <khali@linux-fr.org>
......
......@@ -60,6 +60,11 @@
* This driver also supports the G781 from GMT. This device is compatible
* with the ADM1032.
*
* This driver also supports TMP451 from Texas Instruments. This device is
* supported in both compatibility and extended mode. It's mostly compatible
* with ADT7461 except for local temperature low byte register and max
* conversion rate.
*
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
* concern all supported chipsets, unless mentioned otherwise.
......@@ -111,7 +116,7 @@ static const unsigned short normal_i2c[] = {
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
max6646, w83l771, max6696, sa56004, g781 };
max6646, w83l771, max6696, sa56004, g781, tmp451 };
/*
* The LM90 registers
......@@ -168,6 +173,9 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
#define LM90_DEF_CONVRATE_RVAL 6 /* Def conversion rate register value */
#define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */
/* TMP451 registers */
#define TMP451_REG_R_LOCAL_TEMPL 0x15
/*
* Device flags
*/
......@@ -223,6 +231,7 @@ static const struct i2c_device_id lm90_id[] = {
{ "nct1008", adt7461 },
{ "w83l771", w83l771 },
{ "sa56004", sa56004 },
{ "tmp451", tmp451 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm90_id);
......@@ -311,6 +320,13 @@ static const struct lm90_params lm90_params[] = {
.max_convrate = 9,
.reg_local_ext = SA56004_REG_R_LOCAL_TEMPL,
},
[tmp451] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT,
.alert_alarms = 0x7c,
.max_convrate = 9,
.reg_local_ext = TMP451_REG_R_LOCAL_TEMPL,
}
};
/*
......@@ -746,7 +762,7 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
struct lm90_data *data = lm90_update_device(dev);
int temp;
if (data->kind == adt7461)
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
else if (data->kind == max6646)
temp = temp_from_u8(data->temp8[attr->index]);
......@@ -790,7 +806,7 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
val -= 16000;
mutex_lock(&data->update_lock);
if (data->kind == adt7461)
if (data->kind == adt7461 || data->kind == tmp451)
data->temp8[nr] = temp_to_u8_adt7461(data, val);
else if (data->kind == max6646)
data->temp8[nr] = temp_to_u8(val);
......@@ -812,7 +828,7 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
struct lm90_data *data = lm90_update_device(dev);
int temp;
if (data->kind == adt7461)
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
else if (data->kind == max6646)
temp = temp_from_u16(data->temp11[attr->index]);
......@@ -858,7 +874,7 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
val -= 16000;
mutex_lock(&data->update_lock);
if (data->kind == adt7461)
if (data->kind == adt7461 || data->kind == tmp451)
data->temp11[index] = temp_to_u16_adt7461(data, val);
else if (data->kind == max6646)
data->temp11[index] = temp_to_u8(val) << 8;
......@@ -887,7 +903,7 @@ static ssize_t show_temphyst(struct device *dev,
struct lm90_data *data = lm90_update_device(dev);
int temp;
if (data->kind == adt7461)
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
else if (data->kind == max6646)
temp = temp_from_u8(data->temp8[attr->index]);
......@@ -915,7 +931,7 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
return err;
mutex_lock(&data->update_lock);
if (data->kind == adt7461)
if (data->kind == adt7461 || data->kind == tmp451)
temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]);
else if (data->kind == max6646)
temp = temp_from_u8(data->temp8[LOCAL_CRIT]);
......@@ -1348,6 +1364,19 @@ static int lm90_detect(struct i2c_client *client,
&& (config1 & 0x3F) == 0x00
&& convrate <= 0x08)
name = "g781";
} else
if (address == 0x4C
&& man_id == 0x55) { /* Texas Instruments */
int local_ext;
local_ext = i2c_smbus_read_byte_data(client,
TMP451_REG_R_LOCAL_TEMPL);
if (chip_id == 0x00 /* TMP451 */
&& (config1 & 0x1B) == 0x00
&& convrate <= 0x09
&& (local_ext & 0x0F) == 0x00)
name = "tmp451";
}
if (!name) { /* identification failed */
......@@ -1409,7 +1438,7 @@ static void lm90_init_client(struct i2c_client *client)
data->config_orig = config;
/* Check Temperature Range Select */
if (data->kind == adt7461) {
if (data->kind == adt7461 || data->kind == tmp451) {
if (config & 0x04)
data->flags |= LM90_FLAG_ADT7461_EXT;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment