Commit 1de93d5d authored by Heiner Kallweit's avatar Heiner Kallweit Committed by Wolfram Sang

i2c: i801: Replace waitqueue with completion API

Using the completion API is more intuitive and it allows to simplify
the code. Note that we don't have to set priv->status = 0 any longer
with the completion API.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: default avatarJean Delvare <jdelvare@suse.de>
Tested-by: default avatarJean Delvare <jdelvare@suse.de>
Reviewed-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
parent 78f420ac
......@@ -103,7 +103,7 @@
#include <linux/dmi.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/wait.h>
#include <linux/completion.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/platform_data/itco_wdt.h>
......@@ -270,7 +270,7 @@ struct i801_priv {
unsigned int features;
/* isr processing */
wait_queue_head_t waitq;
struct completion done;
u8 status;
/* Command state used by isr for byte-by-byte block transactions */
......@@ -496,24 +496,19 @@ static int i801_wait_byte_done(struct i801_priv *priv)
static int i801_transaction(struct i801_priv *priv, int xact)
{
int status;
int result;
unsigned long result;
const struct i2c_adapter *adap = &priv->adapter;
result = i801_check_pre(priv);
if (result < 0)
return result;
status = i801_check_pre(priv);
if (status < 0)
return status;
if (priv->features & FEATURE_IRQ) {
reinit_completion(&priv->done);
outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
SMBHSTCNT(priv));
result = wait_event_timeout(priv->waitq,
(status = priv->status),
adap->timeout);
if (!result)
status = -ETIMEDOUT;
priv->status = 0;
return i801_check_post(priv, status);
result = wait_for_completion_timeout(&priv->done, adap->timeout);
return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
}
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
......@@ -638,7 +633,7 @@ static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
* DEV_ERR - Invalid command, NAK or communication timeout
* BUS_ERR - SMI# transaction collision
* FAILED - transaction was canceled due to a KILL request
* When any of these occur, update ->status and wake up the waitq.
* When any of these occur, update ->status and signal completion.
* ->status must be cleared before kicking off the next transaction.
*
* 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
......@@ -675,7 +670,7 @@ static irqreturn_t i801_isr(int irq, void *dev_id)
if (status) {
outb_p(status, SMBHSTSTS(priv));
priv->status = status;
wake_up(&priv->waitq);
complete(&priv->done);
}
return IRQ_HANDLED;
......@@ -694,15 +689,15 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
int i, len;
int smbcmd;
int status;
int result;
unsigned long result;
const struct i2c_adapter *adap = &priv->adapter;
if (command == I2C_SMBUS_BLOCK_PROC_CALL)
return -EOPNOTSUPP;
result = i801_check_pre(priv);
if (result < 0)
return result;
status = i801_check_pre(priv);
if (status < 0)
return status;
len = data->block[0];
......@@ -726,15 +721,10 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
priv->count = 0;
priv->data = &data->block[1];
reinit_completion(&priv->done);
outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
result = wait_event_timeout(priv->waitq,
(status = priv->status),
adap->timeout);
if (!result)
status = -ETIMEDOUT;
priv->status = 0;
return i801_check_post(priv, status);
result = wait_for_completion_timeout(&priv->done, adap->timeout);
return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
}
for (i = 1; i <= len; i++) {
......@@ -1889,7 +1879,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
if (priv->features & FEATURE_IRQ) {
init_waitqueue_head(&priv->waitq);
init_completion(&priv->done);
err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
IRQF_SHARED,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment