Commit 1e1e465c authored by Vivek Gautam's avatar Vivek Gautam Committed by Kishon Vijay Abraham I

scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host

The host makes direct calls into phy using ufs_qcom_phy_*()
APIs. These APIs are only defined for 20nm qcom-ufs-qmp phy
which is not being used by any architecture as yet. Future
architectures too are not going to use 20nm ufs phy.
So remove these ufs_qcom_phy_*() calls from host to let further
change declare the 20nm phy as broken.
Also remove couple of stale enum defines for ufs phy.
Signed-off-by: default avatarVivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 2ba3c43f
......@@ -17,9 +17,9 @@
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/phy/phy-qcom-ufs.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
......
......@@ -16,7 +16,6 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/phy/phy-qcom-ufs.h>
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
......@@ -189,22 +188,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
u32 tx_lanes;
int err = 0;
err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
if (err)
goto out;
err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
if (err)
dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
__func__);
out:
return err;
return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
}
static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
......@@ -932,10 +918,8 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
{
u32 val;
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct phy *phy = host->generic_phy;
struct ufs_qcom_dev_params ufs_qcom_cap;
int ret = 0;
int res = 0;
if (!dev_req_params) {
pr_err("%s: incoming dev_req_params is NULL\n", __func__);
......@@ -1002,12 +986,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
}
val = ~(MAX_U32 << dev_req_params->lane_tx);
res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
if (res) {
dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
__func__, res);
ret = res;
}
/* cache the power mode parameters to use internally */
memcpy(&host->dev_req_params,
......@@ -1264,10 +1242,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
}
}
/* update phy revision information before calling phy_init() */
ufs_qcom_phy_save_controller_version(host->generic_phy,
host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
err = ufs_qcom_init_lane_clks(host);
if (err)
goto out_variant_clear;
......
......@@ -129,11 +129,6 @@ enum {
MASK_CLK_NS_REG = 0xFFFC00,
};
enum ufs_qcom_phy_init_type {
UFS_PHY_INIT_FULL,
UFS_PHY_INIT_CFG_RESTORE,
};
/* QCOM UFS debug print bit mask */
#define UFS_QCOM_DBG_PRINT_REGS_EN BIT(0)
#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN BIT(1)
......
/*
* Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef PHY_QCOM_UFS_H_
#define PHY_QCOM_UFS_H_
#include "phy.h"
int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
void ufs_qcom_phy_save_controller_version(struct phy *phy,
u8 major, u16 minor, u16 step);
#endif /* PHY_QCOM_UFS_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment