net: ena: Add an option to configure large LLQ headers

Allow configuring the device with large LLQ headers. The Low Latency
Queue (LLQ) allows the driver to write the first N bytes of the packet,
along with the rest of the TX descriptors directly into device (N can be
either 96 or 224 for large LLQ headers configuration).

Having L4 TCP/UDP headers contained in the first 96 bytes of the packet
is required to get maximum performance from the device.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -3374,6 +3374,15 @@ static void ena_calc_io_queue_size(struct ena_adapter *adapter,
 	u32 max_tx_queue_size;
 	u32 max_rx_queue_size;
 
+	/* If this function is called after driver load, the ring sizes have already
+	 * been configured. Take it into account when recalculating ring size.
+	 */
+	if (adapter->tx_ring->ring_size)
+		tx_queue_size = adapter->tx_ring->ring_size;
+
+	if (adapter->rx_ring->ring_size)
+		rx_queue_size = adapter->rx_ring->ring_size;
+
 	if (ena_dev->supported_features & BIT(ENA_ADMIN_MAX_QUEUES_EXT)) {
 		struct ena_admin_queue_ext_feature_fields *max_queue_ext =
 			&get_feat_ctx->max_queue_ext.max_queue_ext;
@@ -3415,6 +3424,24 @@ static void ena_calc_io_queue_size(struct ena_adapter *adapter,
 	max_tx_queue_size = rounddown_pow_of_two(max_tx_queue_size);
 	max_rx_queue_size = rounddown_pow_of_two(max_rx_queue_size);
 
+	/* When forcing large headers, we multiply the entry size by 2, and therefore divide
+	 * the queue size by 2, leaving the amount of memory used by the queues unchanged.
+	 */
+	if (adapter->large_llq_header_enabled) {
+		if ((llq->entry_size_ctrl_supported & ENA_ADMIN_LIST_ENTRY_SIZE_256B) &&
+		    ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV) {
+			max_tx_queue_size /= 2;
+			dev_info(&adapter->pdev->dev,
+				 "Forcing large headers and decreasing maximum TX queue size to %d\n",
+				 max_tx_queue_size);
+		} else {
+			dev_err(&adapter->pdev->dev,
+				"Forcing large headers failed: LLQ is disabled or device does not support large headers\n");
+
+			adapter->large_llq_header_enabled = false;
+		}
+	}
+
 	tx_queue_size = clamp_val(tx_queue_size, ENA_MIN_RING_SIZE,
 				  max_tx_queue_size);
 	rx_queue_size = clamp_val(rx_queue_size, ENA_MIN_RING_SIZE,
@@ -3452,13 +3479,30 @@ static int ena_device_validate_params(struct ena_adapter *adapter,
 	return 0;
 }
 
-static void set_default_llq_configurations(struct ena_llq_configurations *llq_config)
+static void set_default_llq_configurations(struct ena_adapter *adapter,
+					   struct ena_llq_configurations *llq_config,
+					   struct ena_admin_feature_llq_desc *llq)
 {
+	struct ena_com_dev *ena_dev = adapter->ena_dev;
+
 	llq_config->llq_header_location = ENA_ADMIN_INLINE_HEADER;
 	llq_config->llq_stride_ctrl = ENA_ADMIN_MULTIPLE_DESCS_PER_ENTRY;
 	llq_config->llq_num_decs_before_header = ENA_ADMIN_LLQ_NUM_DESCS_BEFORE_HEADER_2;
-	llq_config->llq_ring_entry_size = ENA_ADMIN_LIST_ENTRY_SIZE_128B;
-	llq_config->llq_ring_entry_size_value = 128;
+
+	adapter->large_llq_header_supported =
+		!!(ena_dev->supported_features & BIT(ENA_ADMIN_LLQ));
+	adapter->large_llq_header_supported &=
+		!!(llq->entry_size_ctrl_supported &
+			ENA_ADMIN_LIST_ENTRY_SIZE_256B);
+
+	if ((llq->entry_size_ctrl_supported & ENA_ADMIN_LIST_ENTRY_SIZE_256B) &&
+	    adapter->large_llq_header_enabled) {
+		llq_config->llq_ring_entry_size = ENA_ADMIN_LIST_ENTRY_SIZE_256B;
+		llq_config->llq_ring_entry_size_value = 256;
+	} else {
+		llq_config->llq_ring_entry_size = ENA_ADMIN_LIST_ENTRY_SIZE_128B;
+		llq_config->llq_ring_entry_size_value = 128;
+	}
 }
 
 static int ena_set_queues_placement_policy(struct pci_dev *pdev,
@@ -3477,6 +3521,13 @@ static int ena_set_queues_placement_policy(struct pci_dev *pdev,
 		return 0;
 	}
 
+	if (!ena_dev->mem_bar) {
+		netdev_err(ena_dev->net_device,
+			   "LLQ is advertised as supported but device doesn't expose mem bar\n");
+		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
+		return 0;
+	}
+
 	rc = ena_com_config_dev_mode(ena_dev, llq, llq_default_configurations);
 	if (unlikely(rc)) {
 		dev_err(&pdev->dev,
@@ -3492,15 +3543,8 @@ static int ena_map_llq_mem_bar(struct pci_dev *pdev, struct ena_com_dev *ena_dev
 {
 	bool has_mem_bar = !!(bars & BIT(ENA_MEM_BAR));
 
-	if (!has_mem_bar) {
-		if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV) {
-			dev_err(&pdev->dev,
-				"ENA device does not expose LLQ bar. Fallback to host mode policy.\n");
-			ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
-		}
-
+	if (!has_mem_bar)
 		return 0;
-	}
 
 	ena_dev->mem_bar = devm_ioremap_wc(&pdev->dev,
 					   pci_resource_start(pdev, ENA_MEM_BAR),
@@ -3512,10 +3556,11 @@ static int ena_map_llq_mem_bar(struct pci_dev *pdev, struct ena_com_dev *ena_dev
 	return 0;
 }
 
-static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev,
+static int ena_device_init(struct ena_adapter *adapter, struct pci_dev *pdev,
 			   struct ena_com_dev_get_features_ctx *get_feat_ctx,
 			   bool *wd_state)
 {
+	struct ena_com_dev *ena_dev = adapter->ena_dev;
 	struct ena_llq_configurations llq_config;
 	struct device *dev = &pdev->dev;
 	bool readless_supported;
@@ -3600,7 +3645,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev,
 
 	*wd_state = !!(aenq_groups & BIT(ENA_ADMIN_KEEP_ALIVE));
 
-	set_default_llq_configurations(&llq_config);
+	set_default_llq_configurations(adapter, &llq_config, &get_feat_ctx->llq);
 
 	rc = ena_set_queues_placement_policy(pdev, ena_dev, &get_feat_ctx->llq,
 					     &llq_config);
@@ -3609,6 +3654,8 @@ static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev,
 		goto err_admin_init;
 	}
 
+	ena_calc_io_queue_size(adapter, get_feat_ctx);
+
 	return 0;
 
 err_admin_init:
@@ -3707,7 +3754,7 @@ static int ena_restore_device(struct ena_adapter *adapter)
 	int rc;
 
 	set_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags);
-	rc = ena_device_init(ena_dev, adapter->pdev, &get_feat_ctx, &wd_state);
+	rc = ena_device_init(adapter, adapter->pdev, &get_feat_ctx, &wd_state);
 	if (rc) {
 		dev_err(&pdev->dev, "Can not initialize device\n");
 		goto err;
@@ -4309,18 +4356,18 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_drvdata(pdev, adapter);
 
-	rc = ena_device_init(ena_dev, pdev, &get_feat_ctx, &wd_state);
+	rc = ena_map_llq_mem_bar(pdev, ena_dev, bars);
 	if (rc) {
-		dev_err(&pdev->dev, "ENA device init failed\n");
-		if (rc == -ETIME)
-			rc = -EPROBE_DEFER;
+		dev_err(&pdev->dev, "ENA LLQ bar mapping failed\n");
 		goto err_netdev_destroy;
 	}
 
-	rc = ena_map_llq_mem_bar(pdev, ena_dev, bars);
+	rc = ena_device_init(adapter, pdev, &get_feat_ctx, &wd_state);
 	if (rc) {
-		dev_err(&pdev->dev, "ENA llq bar mapping failed\n");
-		goto err_device_destroy;
+		dev_err(&pdev->dev, "ENA device init failed\n");
+		if (rc == -ETIME)
+			rc = -EPROBE_DEFER;
+		goto err_netdev_destroy;
 	}
 
 	/* Initial TX and RX interrupt delay. Assumes 1 usec granularity.
@@ -4330,7 +4377,6 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ena_dev->intr_moder_rx_interval = ENA_INTR_INITIAL_RX_INTERVAL_USECS;
 	ena_dev->intr_delay_resolution = ENA_DEFAULT_INTR_DELAY_RESOLUTION;
 	max_num_io_queues = ena_calc_max_io_queue_num(pdev, ena_dev, &get_feat_ctx);
-	ena_calc_io_queue_size(adapter, &get_feat_ctx);
 	if (unlikely(!max_num_io_queues)) {
 		rc = -EFAULT;
 		goto err_device_destroy;

drivers/net/ethernet/amazon/ena/ena_netdev.h

@@ -334,6 +334,14 @@ struct ena_adapter {
 
 	u32 msg_enable;
 
+	/* large_llq_header_enabled is used for two purposes:
+	 * 1. Indicates that large LLQ has been requested.
+	 * 2. Indicates whether large LLQ is set or not after device
+	 *    initialization / configuration.
+	 */
+	bool large_llq_header_enabled;
+	bool large_llq_header_supported;
+
 	u16 max_tx_sgl_size;
 	u16 max_rx_sgl_size;