mmc: sdhci: Centralize CMD and DATA reset handling

Centralize CMD and DATA reset handling so that is more obvious how reset
is handled in different situations.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220926192022.85660-5-adrian.hunter@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci.c

@@ -259,6 +259,36 @@ static void sdhci_reset_for_all(struct sdhci_host *host)
 	}
 }
 
+enum sdhci_reset_reason {
+	SDHCI_RESET_FOR_INIT,
+	SDHCI_RESET_FOR_REQUEST_ERROR,
+	SDHCI_RESET_FOR_REQUEST_ERROR_DATA_ONLY,
+	SDHCI_RESET_FOR_TUNING_ABORT,
+	SDHCI_RESET_FOR_CARD_REMOVED,
+	SDHCI_RESET_FOR_CQE_RECOVERY,
+};
+
+static void sdhci_reset_for_reason(struct sdhci_host *host, enum sdhci_reset_reason reason)
+{
+	switch (reason) {
+	case SDHCI_RESET_FOR_INIT:
+		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+		break;
+	case SDHCI_RESET_FOR_REQUEST_ERROR:
+	case SDHCI_RESET_FOR_TUNING_ABORT:
+	case SDHCI_RESET_FOR_CARD_REMOVED:
+	case SDHCI_RESET_FOR_CQE_RECOVERY:
+		sdhci_do_reset(host, SDHCI_RESET_CMD);
+		sdhci_do_reset(host, SDHCI_RESET_DATA);
+		break;
+	case SDHCI_RESET_FOR_REQUEST_ERROR_DATA_ONLY:
+		sdhci_do_reset(host, SDHCI_RESET_DATA);
+		break;
+	}
+}
+
+#define sdhci_reset_for(h, r) sdhci_reset_for_reason((h), SDHCI_RESET_FOR_##r)
+
 static void sdhci_set_default_irqs(struct sdhci_host *host)
 {
 	host->ier = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
@@ -327,7 +357,7 @@ static void sdhci_init(struct sdhci_host *host, int soft)
 	unsigned long flags;
 
 	if (soft)
-		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+		sdhci_reset_for(host, INIT);
 	else
 		sdhci_reset_for_all(host);
 
@@ -1542,8 +1572,9 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
 	 */
 	if (data->error) {
 		if (!host->cmd || host->cmd == data_cmd)
-			sdhci_do_reset(host, SDHCI_RESET_CMD);
-		sdhci_do_reset(host, SDHCI_RESET_DATA);
+			sdhci_reset_for(host, REQUEST_ERROR);
+		else
+			sdhci_reset_for(host, REQUEST_ERROR_DATA_ONLY);
 	}
 
 	if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_ADMA)) ==
@@ -2714,8 +2745,7 @@ void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode)
 {
 	sdhci_reset_tuning(host);
 
-	sdhci_do_reset(host, SDHCI_RESET_CMD);
-	sdhci_do_reset(host, SDHCI_RESET_DATA);
+	sdhci_reset_for(host, TUNING_ABORT);
 
 	sdhci_end_tuning(host);
 
@@ -2983,8 +3013,7 @@ static void sdhci_card_event(struct mmc_host *mmc)
 		pr_err("%s: Resetting controller.\n",
 			mmc_hostname(mmc));
 
-		sdhci_do_reset(host, SDHCI_RESET_CMD);
-		sdhci_do_reset(host, SDHCI_RESET_DATA);
+		sdhci_reset_for(host, CARD_REMOVED);
 
 		sdhci_error_out_mrqs(host, -ENOMEDIUM);
 	}
@@ -3055,8 +3084,7 @@ static bool sdhci_request_done(struct sdhci_host *host)
 			/* This is to force an update */
 			host->ops->set_clock(host, host->clock);
 
-		sdhci_do_reset(host, SDHCI_RESET_CMD);
-		sdhci_do_reset(host, SDHCI_RESET_DATA);
+		sdhci_reset_for(host, REQUEST_ERROR);
 
 		host->pending_reset = false;
 	}
@@ -3897,10 +3925,8 @@ void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery)
 
 	host->cqe_on = false;
 
-	if (recovery) {
-		sdhci_do_reset(host, SDHCI_RESET_CMD);
-		sdhci_do_reset(host, SDHCI_RESET_DATA);
-	}
+	if (recovery)
+		sdhci_reset_for(host, CQE_RECOVERY);
 
 	pr_debug("%s: sdhci: CQE off, IRQ mask %#x, IRQ status %#x\n",
 		 mmc_hostname(mmc), host->ier,