Commit 1f61cab8 authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (pmbus) Add support for MAX20751

MAX20751 is a multiphase power controller with internal buck converter.
It uses VR12.0 to report the output voltage. This requires an explicit
driver, since the VR version can not be auto-detected.

The chip supports a manufacturer specific command to fine-tune the output
voltage.  This command is not currently supported.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 068c2270
Kernel driver max20751
======================
Supported chips:
* maxim MAX20751
Prefix: 'max20751'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
This driver supports MAX20751 Multiphase Master with PMBus Interface
and Internal Buck Converter.
The driver is a client driver to the core PMBus driver.
Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
Platform data support
---------------------
The driver supports standard PMBus driver platform data.
Sysfs entries
-------------
The following attributes are supported.
in1_label "vin1"
in1_input Measured voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
in1_lcrit Critical minimum input voltage.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_lcrit_alarm Input voltage critical low alarm.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
in2_label "vout1"
in2_input Measured voltage.
in2_min Minimum output voltage.
in2_max Maximum output voltage.
in2_lcrit Critical minimum output voltage.
in2_crit Critical maximum output voltage.
in2_min_alarm Output voltage low alarm.
in2_lcrit_alarm Output voltage critical low alarm.
in2_min_alarm Output voltage low alarm.
in2_max_alarm Output voltage high alarm.
curr1_input Measured output current.
curr1_label "iout1"
curr1_max Maximum output current.
curr1_alarm Current high alarm.
temp1_input Measured temperature.
temp1_max Maximum temperature.
temp1_crit Critical high temperature.
temp1_max_alarm Chip temperature high alarm.
temp1_crit_alarm Chip temperature critical high alarm.
power1_input Output power.
power1_label "pout1"
......@@ -6539,6 +6539,13 @@ S: Maintained
F: Documentation/hwmon/max16065
F: drivers/hwmon/max16065.c
MAX20751 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/max20751
F: drivers/hwmon/max20751.c
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: "Hans J. Koch" <hjk@hansjkoch.de>
L: lm-sensors@lm-sensors.org
......
......@@ -73,6 +73,16 @@ config SENSORS_MAX16064
This driver can also be built as a module. If so, the module will
be called max16064.
config SENSORS_MAX20751
tristate "Maxim MAX20751"
default n
help
If you say yes here you get hardware monitoring support for Maxim
MAX20751.
This driver can also be built as a module. If so, the module will
be called max20751.
config SENSORS_MAX34440
tristate "Maxim MAX34440 and compatibles"
default n
......
......@@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_LM25066) += lm25066.o
obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o
obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
......
/*
* Hardware monitoring driver for Maxim MAX20751
*
* Copyright (c) 2015 Guenter Roeck
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include "pmbus.h"
static struct pmbus_driver_info max20751_info = {
.pages = 1,
.format[PSC_VOLTAGE_IN] = linear,
.format[PSC_VOLTAGE_OUT] = vid,
.vrm_version = vr12,
.format[PSC_TEMPERATURE] = linear,
.format[PSC_CURRENT_OUT] = linear,
.format[PSC_POWER] = linear,
.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
PMBUS_HAVE_POUT,
};
static int max20751_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
return pmbus_do_probe(client, id, &max20751_info);
}
static const struct i2c_device_id max20751_id[] = {
{"max20751", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, max20751_id);
static struct i2c_driver max20751_driver = {
.driver = {
.name = "max20751",
},
.probe = max20751_probe,
.remove = pmbus_do_remove,
.id_table = max20751_id,
};
module_i2c_driver(max20751_driver);
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment