Commit 1f9d3d98 authored by Libin Yang's avatar Libin Yang Committed by Takashi Iwai

ALSA: hda - set intel audio clock to a proper value

On some Intel platforms, the audio clock may not be set correctly
with initial setting. This will cause the audio playback/capture
rates wrong.

This patch checks the audio clock setting and will set it to a
proper value if it is set incorrectly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188411Signed-off-by: default avatarLibin Yang <libin.yang@intel.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent dde5bff5
......@@ -540,6 +540,98 @@ static void bxt_reduce_dma_latency(struct azx *chip)
azx_writel(chip, VS_EM4L, val);
}
/*
* ML_LCAP bits:
* bit 0: 6 MHz Supported
* bit 1: 12 MHz Supported
* bit 2: 24 MHz Supported
* bit 3: 48 MHz Supported
* bit 4: 96 MHz Supported
* bit 5: 192 MHz Supported
*/
static int intel_get_lctl_scf(struct azx *chip)
{
struct hdac_bus *bus = azx_bus(chip);
static int preferred_bits[] = { 2, 3, 1, 4, 5 };
u32 val, t;
int i;
val = readl(bus->mlcap + AZX_ML_BASE + AZX_REG_ML_LCAP);
for (i = 0; i < ARRAY_SIZE(preferred_bits); i++) {
t = preferred_bits[i];
if (val & (1 << t))
return t;
}
dev_warn(chip->card->dev, "set audio clock frequency to 6MHz");
return 0;
}
static int intel_ml_lctl_set_power(struct azx *chip, int state)
{
struct hdac_bus *bus = azx_bus(chip);
u32 val;
int timeout;
/*
* the codecs are sharing the first link setting by default
* If other links are enabled for stream, they need similar fix
*/
val = readl(bus->mlcap + AZX_ML_BASE + AZX_REG_ML_LCTL);
val &= ~AZX_MLCTL_SPA;
val |= state << AZX_MLCTL_SPA_SHIFT;
writel(val, bus->mlcap + AZX_ML_BASE + AZX_REG_ML_LCTL);
/* wait for CPA */
timeout = 50;
while (timeout) {
if (((readl(bus->mlcap + AZX_ML_BASE + AZX_REG_ML_LCTL)) &
AZX_MLCTL_CPA) == (state << AZX_MLCTL_CPA_SHIFT))
return 0;
timeout--;
udelay(10);
}
return -1;
}
static void intel_init_lctl(struct azx *chip)
{
struct hdac_bus *bus = azx_bus(chip);
u32 val;
int ret;
/* 0. check lctl register value is correct or not */
val = readl(bus->mlcap + AZX_ML_BASE + AZX_REG_ML_LCTL);
/* if SCF is already set, let's use it */
if ((val & ML_LCTL_SCF_MASK) != 0)
return;
/*
* Before operating on SPA, CPA must match SPA.
* Any deviation may result in undefined behavior.
*/
if (((val & AZX_MLCTL_SPA) >> AZX_MLCTL_SPA_SHIFT) !=
((val & AZX_MLCTL_CPA) >> AZX_MLCTL_CPA_SHIFT))
return;
/* 1. turn link down: set SPA to 0 and wait CPA to 0 */
ret = intel_ml_lctl_set_power(chip, 0);
udelay(100);
if (ret)
goto set_spa;
/* 2. update SCF to select a properly audio clock*/
val &= ~ML_LCTL_SCF_MASK;
val |= intel_get_lctl_scf(chip);
writel(val, bus->mlcap + AZX_ML_BASE + AZX_REG_ML_LCTL);
set_spa:
/* 4. turn link up: set SPA to 1 and wait CPA to 1 */
intel_ml_lctl_set_power(chip, 1);
udelay(100);
}
static void hda_intel_init_chip(struct azx *chip, bool full_reset)
{
struct hdac_bus *bus = azx_bus(chip);
......@@ -565,6 +657,9 @@ static void hda_intel_init_chip(struct azx *chip, bool full_reset)
/* reduce dma latency to avoid noise */
if (IS_BXT(pci))
bxt_reduce_dma_latency(chip);
if (bus->mlcap != NULL)
intel_init_lctl(chip);
}
/* calculate runtime delay from LPIB */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment