Commit 1fb4dcee authored by Marek Vasut's avatar Marek Vasut

drm/bridge: tc358767: Add configurable default preemphasis

Make the default DP port preemphasis configurable via new DT property
"toshiba,pre-emphasis". This is useful in case the DP link properties
are known and starting link training from preemphasis setting of 0 dB
is not useful. The preemphasis can be set separately for both DP lanes
in range 0=0dB, 1=3.5dB, 2=6dB .
Acked-by: default avatarAlexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-2-marex@denx.de
parent b7d3d544
......@@ -241,6 +241,10 @@
/* Link Training */
#define DP0_SRCCTRL 0x06a0
#define DP0_SRCCTRL_PRE1 GENMASK(29, 28)
#define DP0_SRCCTRL_SWG1 GENMASK(25, 24)
#define DP0_SRCCTRL_PRE0 GENMASK(21, 20)
#define DP0_SRCCTRL_SWG0 GENMASK(17, 16)
#define DP0_SRCCTRL_SCRMBLDIS BIT(13)
#define DP0_SRCCTRL_EN810B BIT(12)
#define DP0_SRCCTRL_NOTP (0 << 8)
......@@ -278,6 +282,8 @@
#define AUDIFDATA6 0x0720 /* DP0 Audio Info Frame Bytes 27 to 24 */
#define DP1_SRCCTRL 0x07a0 /* DP1 Control Register */
#define DP1_SRCCTRL_PRE GENMASK(21, 20)
#define DP1_SRCCTRL_SWG GENMASK(17, 16)
/* PHY */
#define DP_PHY_CTRL 0x0800
......@@ -369,6 +375,7 @@ struct tc_data {
u32 rev;
u8 assr;
u8 pre_emphasis[2];
struct gpio_desc *sd_gpio;
struct gpio_desc *reset_gpio;
......@@ -1090,13 +1097,17 @@ static int tc_main_link_enable(struct tc_data *tc)
return ret;
}
ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc));
ret = regmap_write(tc->regmap, DP0_SRCCTRL,
tc_srcctrl(tc) |
FIELD_PREP(DP0_SRCCTRL_PRE0, tc->pre_emphasis[0]) |
FIELD_PREP(DP0_SRCCTRL_PRE1, tc->pre_emphasis[1]));
if (ret)
return ret;
/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
ret = regmap_write(tc->regmap, DP1_SRCCTRL,
(tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
((tc->link.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
((tc->link.rate != 162000) ? DP0_SRCCTRL_BW27 : 0) |
FIELD_PREP(DP1_SRCCTRL_PRE, tc->pre_emphasis[1]));
if (ret)
return ret;
......@@ -1188,8 +1199,10 @@ static int tc_main_link_enable(struct tc_data *tc)
goto err_dpcd_write;
/* Reset voltage-swing & pre-emphasis */
tmp[0] = tmp[1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 |
DP_TRAIN_PRE_EMPH_LEVEL_0;
tmp[0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 |
FIELD_PREP(DP_TRAIN_PRE_EMPHASIS_MASK, tc->pre_emphasis[0]);
tmp[1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 |
FIELD_PREP(DP_TRAIN_PRE_EMPHASIS_MASK, tc->pre_emphasis[1]);
ret = drm_dp_dpcd_write(aux, DP_TRAINING_LANE0_SET, tmp, 2);
if (ret < 0)
goto err_dpcd_write;
......@@ -1213,7 +1226,9 @@ static int tc_main_link_enable(struct tc_data *tc)
ret = regmap_write(tc->regmap, DP0_SRCCTRL,
tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
DP0_SRCCTRL_AUTOCORRECT |
DP0_SRCCTRL_TP1);
DP0_SRCCTRL_TP1 |
FIELD_PREP(DP0_SRCCTRL_PRE0, tc->pre_emphasis[0]) |
FIELD_PREP(DP0_SRCCTRL_PRE1, tc->pre_emphasis[1]));
if (ret)
return ret;
......@@ -1248,7 +1263,9 @@ static int tc_main_link_enable(struct tc_data *tc)
ret = regmap_write(tc->regmap, DP0_SRCCTRL,
tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
DP0_SRCCTRL_AUTOCORRECT |
DP0_SRCCTRL_TP2);
DP0_SRCCTRL_TP2 |
FIELD_PREP(DP0_SRCCTRL_PRE0, tc->pre_emphasis[0]) |
FIELD_PREP(DP0_SRCCTRL_PRE1, tc->pre_emphasis[1]));
if (ret)
return ret;
......@@ -1274,7 +1291,9 @@ static int tc_main_link_enable(struct tc_data *tc)
/* Clear Training Pattern, set AutoCorrect Mode = 1 */
ret = regmap_write(tc->regmap, DP0_SRCCTRL, tc_srcctrl(tc) |
DP0_SRCCTRL_AUTOCORRECT);
DP0_SRCCTRL_AUTOCORRECT |
FIELD_PREP(DP0_SRCCTRL_PRE0, tc->pre_emphasis[0]) |
FIELD_PREP(DP0_SRCCTRL_PRE1, tc->pre_emphasis[1]));
if (ret)
return ret;
......@@ -2363,6 +2382,18 @@ static int tc_probe_bridge_endpoint(struct tc_data *tc)
return -EINVAL;
}
mode |= BIT(endpoint.port);
if (endpoint.port == 2) {
of_property_read_u8_array(node, "toshiba,pre-emphasis",
tc->pre_emphasis,
ARRAY_SIZE(tc->pre_emphasis));
if (tc->pre_emphasis[0] < 0 || tc->pre_emphasis[0] > 2 ||
tc->pre_emphasis[1] < 0 || tc->pre_emphasis[1] > 2) {
dev_err(dev, "Incorrect Pre-Emphasis setting, use either 0=0dB 1=3.5dB 2=6dB\n");
return -EINVAL;
}
}
}
if (mode == mode_dpi_to_edp || mode == mode_dpi_to_dp) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment